Clipsal - Motion Sensor Motion Sensor Load Correction Capacitor Allows 2 Wire Devices to be Used
Item Number: 31CAP
Datasheet
Specifications
Design
| Product brand | Clipsal |
|---|---|
| Product or component type | capacitor |
Physical
| Mercury free | Yes |
|---|---|
| Rohs exemption information | Yes |
| Environmental disclosure | ENVPEP1308010_V2 |
| Reach regulation | Reference contains Substances of Very High Concern above the threshold |
| China rohs regulation | X |
| Eu rohs directive | Compliant By Exemption |
Documents & downloads
-
All
-
Installation Instruction
-
Certificates (MSDS)
-
Declaration of Conformity (Sustainability)
31CAP EU RoHS Directive
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
31CAP EU RoHS Directive
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
31CAP EU RoHS Directive
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
31CAP EU RoHS Directive
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
31CAP REACh Regulation
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
31CAP REACh Regulation
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
Frequently Asked Questions
I am installing a 2-wire Dimmer, when should I be using a 31CAP or 31LCDA?
Hide ShowThe 31CAP and 31LCDA both have separate uses to resolve issues experienced with 2-wire Dimmers.
The 31CAP should be used when minimum load of the device is not being met, this is usually indicated by the load/light, that is controlled by the dimmer, by glowing when it should be off. Adding the 31CAP will increase the load and prevent the load/light from glowing in the off state. Depending on how far off minimum load you are more than one 31CAP may be required.
The 31LCDA should be used in instances where the load/light is flickering constantly, which indicates an issue with compatibility with the 2-wire dimmer used. The 31LCDA resolves these incompatibilities and flickering should then stop, if the flickering is reduced but still present you may need another 31LCDA to completely resolve. No more than 3x 31LCDA’s should be used on one dimmer.
Why does my 41E300PBUD2SM (Dimmer) leave my light glowing when the dimmer is off?
Hide ShowYou can then connect a 31CAP to increase the loading.
What is the difference between the 31Cap and 31LCDA?
Hide Show31CAP - Increases minimum load.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31CAP
31LCDA - Assists with compatibility issues.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31LCDA