| Life cycle assessment data |
No |
| If one of the deliverables is not relevant please give the reason |
End of commercialization (planned, announced or effective) |
| Substance regulation data deliverable |
Yes |
| Legacy weee scope |
In |
| Package 1 bare product quantity |
1 |
| Package 2 bare product quantity |
30 |
| Average percentage of recycled plastic content |
0 % |
| |
At least in Europe |
| Warranty duration(in months) bmecat |
18 |
| Weee label |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
| Product specific application |
simple machine |
| Design of frequency changer |
U converter |
| Supply frequency |
50/60 Hz +/- 5 % |
| [us] rated supply voltage |
200...240 V - 15...10 % |
| [us] rated supply voltage |
200...240 V |
| Relative symmetric mains voltage tolerance |
10 % |
| Nominal output current |
10 A |
| Number of input phases |
3 |
| Number of output phases |
3 |
| Motor power kw |
2.2 kW |
| Motor power hp |
3 hp |
| Emc filter |
integrated |
| Network number of phases |
1 phase |
| Motor power hp |
3 hp |
| Discrete input number |
4 |
| Discrete output number |
2 |
| Analogue input number |
1 |
| Analogue output number |
1 |
| Relay output number |
1 |
| Number of inputs, bidirectional, not potential-free |
0 |
| Number of inputs, potential-free |
0 |
| Computer port |
true |
| Optical interface present |
false |
| Physical interface |
2-wire RS 485 |
| Continuous output current |
10 A at 4 kHz |
| Method of access |
server Modbus serial |
| Speed drive output frequency |
0.5...400 Hz |
| Speed range |
1...20 |
| Sampling duration |
- 20 ms, tolerance +/- 1 ms for logic input
- 10 ms for analogue input
|
| Linearity error |
+/- 0.3 % of maximum value for analogue input |
| Frequency resolution |
- analog input: converter A/D, 10 bits
- display unit: 0.1 Hz
|
| Time constant |
20 ms +/- 1 ms for reference change |
| Transmission rate |
- 9.6 kbit/s
- 19.2 kbit/s
- 38.4 kbit/s
|
| Transmission frame |
RTU |
| Number of addresses |
1...247 |
| Data format |
8 bits, configurable odd, even or no parity |
| Communication service |
- read holding registers (03) 29 words
- write single register (06) 29 words
- write multiple registers (16) 27 words
- read/write multiple registers (23) 4/4 words
- read device identification (43)
|
| Type of polarization |
no impedance |
| Number of hw interfaces parallel |
0 |
| Number of hw interfaces industrial ethernet |
0 |
| Number of hw interfaces profinet |
0 |
| Number of hw interfaces serial rs232 |
0 |
| Number of hw interfaces serial rs422 |
0 |
| Number of hw interfaces serial rs485 |
1 |
| Number of hw interfaces serial tty |
0 |
| Number of hw interfaces usb |
0 |
| Number of hw interfaces other |
0 |
| Supporting protocol for as-interface safety at work |
false |
| Supporting protocol for asi |
false |
| Supporting protocol for suconet |
false |
| Supporting protocol for bacnet |
false |
| Supporting protocol for can |
false |
| Supporting protocol for data-highway |
false |
| Supporting protocol for devicenet |
false |
| Supporting protocol for devicenet safety |
false |
| Supporting protocol for ethernet/ip |
false |
| Supporting protocol for foundation fieldbus |
false |
| Supporting protocol for interbus |
false |
| Supporting protocol for interbus-safety |
false |
| Supporting protocol for knx |
false |
| Supporting protocol for lon |
false |
| Supporting protocol for modbus |
true |
| Supporting protocol for other bus systems |
false |
| Supporting protocol for profibus |
false |
| Supporting protocol for profinet cba |
false |
| Supporting protocol for profinet io |
false |
| Supporting protocol for profisafe |
false |
| Supporting protocol for safetybus p |
false |
| Supporting protocol for sercos |
false |
| Supporting protocol for tcp/ip |
false |
| 4 quadrant operation possible |
false |
| Asynchronous motor control profile |
- sensorless flux vector control
- quadratic voltage/frequency ratio
- voltage/frequency ratio (V/f)
|
| Maximum output frequency |
4 kHz |
| Transient overtorque |
150...170 % of nominal motor torque depending on drive rating and type of motor |
| Acceleration and deceleration ramps |
- linear from 0 to 999.9 s
- U
- S
|
| Motor slip compensation |
- adjustable
- preset in factory
|
| Switching frequency |
- 2...16 kHz adjustable
- 4...16 kHz with derating factor
|
| Nominal switching frequency |
4 kHz |
| Braking to standstill |
by DC injection |
| Brake chopper integrated |
false |
| Maximum associated fuse rating |
12.5 A |
| Line current |
- 24.0 A at 100 V (heavy duty)
- 20.2 A at 120 V (heavy duty)
|
| Maximum output voltage |
240 V |
| Nominal output power |
2200.0 W |
| Apparent power |
4.8 kVA at 240 V (heavy duty) |
| Maximum transient current |
- 15.0 A during 60 s (heavy duty)
- 16.5 A during 2 s (heavy duty)
|
| Capacity of dc link |
1890.0 µF |
| Network frequency |
50...60 Hz |
| Relative symmetric network frequency tolerance |
5 % |
| Prospective line isc |
1 kA |
| 1 phase low current possible |
false |
| Base load current at high overload |
10.0 A |
| Application in domestic and commercial area permitted |
false |
| Application in industrial area permitted |
true |
| Emc limit value (complied) |
true |
| Power loss per device current dependent |
93.0 W |
| Power loss static current independent |
11.0 W |
| Power dissipation in w |
forced cooling: 93.0 W |
| Housing material |
plastic |
| With safety function safely limited speed (sls) |
false |
| With safety function safe brake management (sbc/sbt) |
false |
| With safety function safe operating stop (sos) |
false |
| With safety function safe position (sp) |
false |
| With safety function safe programmable logic |
false |
| With safety function safe speed monitor (ssm) |
false |
| With safety function safe stop 1 (ss1) |
false |
| With sft fct safe stop 2 (ss2) |
false |
| With safety function safe torque off (sto) |
false |
| With safety function safely limited position (slp) |
false |
| With safety function safe direction (sdi) |
false |
| Operating element present |
true |
| Tightening torque |
1.2 N.m |
| Insulation |
electrical between power and control |
| Operating altitude |
- > 1000...2000 m with current derating 1 % per 100 m
- <= 1000 m without derating
|
| Operating position |
vertical +/- 10 degree |
| Assembly style |
with heat sink |
| Electromagnetic compatibility |
- electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- immunity to conducted disturbances level 3 conforming to IEC 61000-4-6
- radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
- surge immunity test level 3 conforming to IEC 61000-4-5
- voltage dips and interruptions immunity test conforming to IEC 61000-4-11
|
| Environmental class (during operation) |
- class 3C3 according to IEC 60721-3-3
- class 3S2 according to IEC 60721-3-3
|
| Environmental class (during storage) |
- class 1C3 according to IEC 60721-3-1
- class 1S2 according to IEC 60721-3-1
|
| Environmental class (during transport) |
- class 2C3 according to IEC 60721-3-2
- class 2S1 according to IEC 60721-3-2
|
| Maximum acceleration under shock impact (during operation) |
150 m/s² at 11 ms |
| Maximum acceleration under shock load (during storage) |
150 m/s² at 11 ms |
| Maximum acceleration under shock load (during transport) |
150 m/s² at 11 ms |
| Maximum acceleration under vibratory load (during storage) |
10 m/s² at 13...200 Hz |
| Maximum acceleration under vibratory load (during transport) |
10 m/s² at 13...200 Hz |
| Maximum acceleration under vibrational stress (during operation) |
10 m/s² at 13...200 Hz |
| Maximum deflection under vibratory load (during storage) |
1.5 mm at 2...13 Hz |
| Maximum deflection under vibratory load (during transport) |
1.5 mm at 2...13 Hz |
| Maximum deflection under vibratory load (during operation) |
1.5 mm at 2...13 Hz |
| Volume of cooling air |
16 m3/h |
| Overvoltage category |
class III |
| Regulation loop |
adjustable PID regulator |
| Electromagnetic emission |
- radiated emissions environment 1 category C2 conforming to IEC 61800-3 2...16 kHz shielded motor cable
- conducted emissions with integrated EMC filter environment 1 category C1 conforming to IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5 m
- conducted emissions with additional EMC filter environment 1 category C1 conforming to IEC 61800-3 4...12 kHz shielded motor cable <20 m
- conducted emissions with additional EMC filter environment 1 category C2 conforming to IEC 61800-3 4...12 kHz shielded motor cable <50 m
- conducted emissions with additional EMC filter environment 2 category C3 conforming to IEC 61800-3 4...12 kHz shielded motor cable <50 m
- conducted emissions with integrated EMC filter environment 1 category C2 conforming to IEC 61800-3 4...16 kHz shielded motor cable <5 m
- conducted emissions with integrated EMC filter environment 1 category C2 conforming to IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <10 m
|
| Vibration resistance |
- 1 gn (f = 13-200 Hz) conforming to IEC 60068-2-6
- 1.5 mm peak to peak (f = 3-13 Hz) - drive unmounted on symmetrical DIN rail - conforming to IEC 60068-2-6
|
| Shock resistance |
15 gn conforming to IEC 60068-2-27 for 11 ms |
| Noise level |
45 dB |
| Pollution degree |
2 |
| Ambient air transport temperature |
-25...70 °C |
| Unit type of package 1 |
PCE |
| Number of units in package 1 |
1 |
| Package 1 height |
18.000 cm |
| Package 1 width |
18.500 cm |
| Package 1 length |
18.500 cm |
| Package 1 weight |
1.767 kg |
| Unit type of package 2 |
S06 |
| Number of units in package 2 |
30 |
| Package 2 height |
75.000 cm |
| Package 2 width |
60.000 cm |
| Package 2 length |
80.000 cm |
| Package 2 weight |
65.950 kg |
| Green premium status for reporting |
Green Premium product |
| Sustainable packaging |
Yes |
| Take-back |
No |
| Product contributes to saved and avoided emissions |
Yes |
| Removable battery |
N/A |
| Average percentage of recycled metal content |
0 % |
| Packaging made with recycled cardboard |
Yes |
| Packaging without single use plastic |
Yes |
| Scip number |
4a84ec00-b29e-4a08-82b9-8e16a72fb187 |
| China rohs label |
5 |
| Product contributes to saved and avoided emissions |
Yes |
| End of life manual availability |
ENVEOLI100204EN |
| Take-back |
No |
| Weee label |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
| Warranty (in months) |
18 |
