Clipsal - Motion Sensor Motion Infrared Sensor 10A, 3 Wire, Outdoor | Grey
Item Number: 750WPR-GY
Datasheet
Specifications
Design
| Range of product | Infrascan |
|---|---|
| Range | Infrascan |
| Product brand | Clipsal |
| Product or component type | movement sensor |
Physical
| [ue] rated operational voltage | 200...265 V AC |
|---|---|
| Mounting support |
|
| Mounting height | 2.4 m |
| Ip degree of protection | IP66 |
| Ambient air temperature for operation | 0...50 °C |
| Reach free of svhc | Yes |
| Toxic heavy metal free | Yes |
| Mercury free | Yes |
| Rohs exemption information | Yes |
| Environmental disclosure | ENVPEP110502EN |
| Reach regulation | Free of Substances of Very High Concern above the threshold |
| China rohs regulation | Product out of China RoHS scope |
| Eu rohs directive | Compliant |
Documents & downloads
-
All
-
Product Brochures
-
Installation Instruction
-
Specification Guide
-
Declaration of Conformity
-
Declaration of Conformity (Sustainability)
750WPR-GY EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY REACh Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY REACh Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
Frequently Asked Questions
Does the new 750WPR5 use the same relay that was used in the previous 750WPR?
Hide ShowHow do I trigger the override function on the 750WPR5?
Hide ShowEnsure the sensor is in Automatic Operation mode. Turn the wall switch controlling the sensor OFF, ON, OFF and ON within 2 seconds. Sensor is now in an 8-hour override mode. After this period times out, the sensor will return to automatic operation mode. To cancel manual override mode prior to 8 hours expiring, turn the wall switch OFF and then ON within 2 seconds.
Note - The override function has the load stay on for 8 hours. This can NOT be configured to change the 8 hours to be longer or shorter. You can only shorten this override with physical switch presses.
What happens to the 750WPR5 when first powered up?
Hide ShowWhy is the lens on my 750WPR5 bowed when I got it out of the box?
Hide ShowCan the new 750WPR5 be used to easily replace an older version of the 750WPR?
Hide ShowIs the 750WPR5 suitable for outdoor use?
Hide ShowYes.
The product has an IP rating of IP66. An IP66 rating means that the unit doesn’t allow dust or strong jets of water to enter the inside of the unit.
The product can be installed on the outside of the home in the elements with no protection as long as it is installed correctly using the gasket supplied and following the instructions.
Can you wire multiple 750WPR 3-wire sensors in parallel?
Hide ShowYes, you can wire multiple 3-wire 750WPR sensors in parallel as they are a 3-wire device and aren't load dependant.
Some of the key features are:
- 10A maximum load current
- Stand-by power consumption is less than 1W
- 3 Wire
- Neutral required
- 30 seconds warmup time
- 18 metre radius x 110° rated detection field at maximum sensitivity
- 5 seconds to 20 minutes timer delay range
- Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
- Relay switching method
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=750WPR