Home ProductsIndustrialAltistartSoft starter for asynchronous motor

Altistart 01 Soft starter for asynchronous motor ATSU01, 6 A-200..480V-0.75..3 KW

Item Number: ATSU01N206LT

1 PCE 0

Where To Buy

Datasheet

Download

Product Dimensions

Width45 mm

Height234 mm

Depth150 mm

See full specifications

Barcode

Qty	UoM	EAN	Colour
			-
			-
			-

Barcode

Qty	UoM	EAN	Colour
1	CAR	3389110667080	-

Specifications

Design

Range of product	Altistart U01 and TeSys U
Product destination	asynchronous motors
Product or component type	soft starter
Warranty	18 months

Physical

[ue] rated operational voltage	400 V 3 kW 230 V 0.75 kW 400 V 2.2 kW 230 V 1 kW 400 V 1.5 kW 230 V 1 hp 460 V 2 hp 460 V 3 hp 230 V 1.5 hp
Function available	integrated bypass
Marking	CE
Height	234 mm
Width	45 mm
Depth	150 mm
Net weight	0.34 kg
Standards	EN/IEC 60947-4-2
Product certifications	CCC UL C-Tick CSA
Ip degree of protection	IP20
Relative humidity	5...95 % without condensation or dripping water conforming to EN/IEC 60068...2-3
Ambient air temperature for operation	-10...40 °C (without derating) 40...50 °C (with current derating of 2 % per °C)
Ambient air temperature for storage	-25...70 °C conforming to EN/IEC 60947...4-2
Reach free of svhc	Yes
Toxic heavy metal free	Yes
Mercury free	Yes
Rohs exemption information	Yes
Reach regulation	Free of Substances of Very High Concern above the threshold
China rohs regulation	X
Eu rohs directive	Compliant
California proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Life cycle assessment data	No
If one of the deliverables is not relevant please give the reason	Brand Labelling
Substance regulation data deliverable	Yes
Legacy weee scope	In
Package 1 bare product quantity	1
Package 2 bare product quantity	14
Average percentage of recycled plastic content	0 %
	At least in Europe
Warranty duration(in months) bmecat	18
Weee label	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Product specific application	simple machine
Device short name	ATSU01
Network number of phases	3 phases
[us] rated supply voltage	200...480 V - 10...10 %
Motor power kw	3 kW, 3 phases at 400 V 0.75 kW, 3 phases at 230 V 2.2 kW, 3 phases at 400 V 1 kW, 3 phases at 230 V 1.5 kW, 3 phases at 400 V
Motor power hp	1 hp, 3 phases at 230 V 2 hp, 3 phases at 460 V 3 hp, 3 phases at 460 V 1.5 hp, 3 phases at 230 V
Icl starter rating	6 A
Utilisation category	AC-53B conforming to EN/IEC 60947-4-2
Current consumption	65 mA
Type of start	start with voltage ramp
Power dissipation in w	1.5 W at full load and at end of starting 61.5 W in transient state
Assembly style	with heat sink
Supply voltage limits	180...528 V
Supply frequency	50...60 Hz - 5...5 %
Network frequency	47.5...63 Hz
Output voltage	<= power supply voltage
[uc] control circuit voltage	24 V DC +/- 10 %
Starting time	1 s / 100 5 s / 20 10 s / 10 adjustable from 1 to 10 s
Deceleration time symb	adjustable from 1 to 10 s
Starting torque	30...80 % of starting torque of motor connected directly on the line supply
Discrete input type	logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete input voltage	24...40 V
Input output isolation	galvanic between power and control
Discrete input logic	positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
Discrete output current	2 A DC-13 3 A AC-15
Discrete output type	open collector logic LO1 end of starting signal relay outputs R1A, R1C NO
Discrete output voltage	24 V (voltage limits: 6...30 V) open collector logic
Minimum switching current	10 mA at 6 V DC for relay outputs
Maximum switching current	relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load relay outputs: 2 A at 250 V AC AC-15 cos phi = 0.5 and L/R = 20 ms inductive load
Maximum switching voltage	440 V relay outputs
Display type	1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached
Tightening torque	1.9...2.5 N.m 0.5...0.5 N.m
Electrical connection	4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
Operating position	vertical +/- 10 degree
Power range	0.55...1 kW at 200...240 V 3 phases 1.1...2 kW at 380...440 V 3 phases 2.2...3 kW
Motor starter type	soft starter
Electromagnetic compatibility	conducted and radiated emissions level B conforming to CISPR 11 conducted and radiated emissions level B conforming to IEC 60947-4-2 damped oscillating waves level 3 conforming to IEC 61000-4-12 electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity level B conforming to EN 50082-2 harmonics level 3 conforming to IEC 1000-3-2 harmonics level 3 conforming to IEC 1000-3-4 immunity to electrical transients level 4 conforming to IEC 61000-4-4 immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 voltage/current impulse level 3 conforming to IEC 61000-4-5 conducted and radiated emissions level 3 conforming to IEC 61000-4-6 immunity to conducted interference caused by radio-electrical fields level 4 conforming to IEC 61000-4-11
Pollution degree	2 conforming to EN/IEC 60947-4-2
Vibration resistance	1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
Operating altitude	<= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m
Unit type of package 1	PCE
Number of units in package 1	1
Package 1 height	5.400 cm
Package 1 width	15.000 cm
Package 1 length	17.000 cm
Package 1 weight	450.000 g
Unit type of package 2	S03
Number of units in package 2	14
Package 2 height	30.000 cm
Package 2 width	30.000 cm
Package 2 length	40.000 cm
Package 2 weight	6.840 kg
Sustainable packaging	Yes
Take-back	No
Product contributes to saved and avoided emissions	No
Removable battery	N/A
Average percentage of recycled metal content	0 %
Packaging made with recycled cardboard	Yes
Packaging without single use plastic	Yes
China rohs label	1
Take-back	No
Weee label	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Warranty (in months)	18