Browse all
Browse all

Altistart 22 Soft starter ATS22 control 220V power 230V(15kW)/400...440V(30kW)

Altistart 22 Soft starter ATS22 control 220V power 230V(15kW)/400...440V(30kW)

Item Number: ATS22D62Q

Datasheet

Product Dimensions

Width icon

Width145 mm

Height icon

Height295 mm

Depth icon

Depth207 mm

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product Altistart 22
Product or component type soft starter
Product destination asynchronous motors
Warranty 18 months

Physical

Ip degree of protection IP20
Function available internal bypass
Output current 0.4...1 Icl adjustable
Communication port protocol Modbus
Connector type 1 RJ45
Protection type
  • phase failure: line
  • thermal protection: motor
  • thermal protection: starter
Marking CE
Height 295 mm
Width 145 mm
Depth 207 mm
Net weight 12 kg
Standards IEC 60947-4-2
Product certifications
  • C-Tick
  • CCC
  • UL
  • CSA
  • GOST
Relative humidity 0...95 % without condensation or dripping water conforming to IEC 60068...2-3
Ambient air temperature for operation
  • -10...40 °C (without derating)
  • 40...60 °C (with current derating 2.2 % per °C)
Ambient air temperature for storage -25...70 °C
Mercury free Yes
Rohs exemption information Yes
Environmental disclosure ENVPEP100403EN
Reach regulation Reference contains Substances of Very High Concern above the threshold
China rohs regulation X
Eu rohs directive Compliant By Exemption
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Life cycle assessment data No
If one of the deliverables is not relevant please give the reason End of commercialization (planned, announced or effective)
Substance regulation data deliverable Yes
Legacy weee scope In
Package 1 bare product quantity 1
Average percentage of recycled plastic content 0 %
At least in Europe
Warranty duration(in months) bmecat 18
Weee label The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Product specific application pumps and fans
Component name ATS22
Network number of phases 3 phases
[us] rated supply voltage 230...440 V - 15...10 %
Motor power kw
  • 15 kW 230 V
  • 30 kW 400 V
  • 30 kW 440 V
Factory setting current 57 A
Power dissipation in w 59 W for standard applications
Utilisation category AC-53A
Type of start start with torque control (current limited to 3.5 In)
Icl starter rating 62 A for connection in the motor supply line for standard applications
Assembly style with heat sink
Supply voltage limits 195...484 V
Supply frequency 50...60 Hz - 10...10 %
Network frequency 45...66 Hz
Device connection
  • to the motor delta terminals
  • in the motor supply line
[uc] control circuit voltage 230 V - 15...10 % 50/60 Hz
Control circuit consumption 20 W
Discrete output number 2
Discrete output type
  • relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
  • relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Minimum switching current 100 mA at 12 V DC (relay outputs)
Maximum switching current
  • 5 A 250 V AC resistive 1 relay outputs
  • 5 A 30 V DC resistive 1 relay outputs
  • 2 A 250 V AC inductive 0.4 20 ms relay outputs
  • 2 A 30 V DC inductive 7 ms relay outputs
Discrete input number 3
Discrete input type (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Discrete input voltage 24 V <= 30 V
Discrete input logic positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Ptc probe input 750 Ohm
Communication data link serial
Physical interface RS485 multidrop
Transmission rate 4800, 9600 or 19200 bps
Installed device 31
Type of cooling forced convection
Operating position vertical +/- 10 degree
Power range
  • 15...25 kW at 200...240 V 3 phases
  • 30...50 kW at 380...440 V 3 phases
Motor starter type soft starter
Electromagnetic compatibility
  • conducted and radiated emissions level A conforming to IEC 60947-4-2
  • damped oscillating waves level 3 conforming to IEC 61000-4-12
  • electrostatic discharge level 3 conforming to IEC 61000-4-2
  • immunity to electrical transients level 4 conforming to IEC 61000-4-4
  • immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
  • voltage/current impulse level 3 conforming to IEC 61000-4-5
Vibration resistance
  • 1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6
  • 1.5 mm (f= 2-13 Hz) conforming to IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Noise level 45 dB
Pollution degree level 2 conforming to IEC 60664-1
Operating altitude
  • <= 1000 m without derating
  • > 1000...< 2000 m with current derating of 2.2 % per additional 100 m
Unit type of package 1 PCE
Number of units in package 1 1
Package 1 height 31.0 cm
Package 1 width 23.5 cm
Package 1 length 36.0 cm
Package 1 weight 8.262 kg
Unit type of package 2 P06
Number of units in package 2 6
Package 2 height 73.5 cm
Package 2 width 80.0 cm
Package 2 length 60.0 cm
Package 2 weight 64.0 kg
Green premium status for reporting Green Premium product
Sustainable packaging No
Take-back No
Product contributes to saved and avoided emissions No
Removable battery N/A
Average percentage of recycled metal content 0 %
Packaging made with recycled cardboard No
Packaging without single use plastic No
Scip number 7f28cbce-306d-4c94-ba04-b506c5522d63
China rohs label 5
End of life manual availability ENVEOLI110803EN
Take-back No
Weee label The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Warranty (in months) 18

Documents & downloads

Filter items
  • All

  • CAD Files and Packs

  • Technical Data Catalogues

  • End of Life Manual

  • Installation Instruction

  • Operating Manuals

  • Certificates (MSDS)

  • Declaration of Conformity

  • eTechPub

  • Declaration of Conformity (Sustainability)

  • Software - Data Library

Important: Some software files may need a mySchneider or Club login to download.