Clipsal Wiser IP Camera Wi-Fi, Pan and Tilt Adjustment, Indoor, IP20

Clipsal Wiser IP Camera Wi-Fi, Pan and Tilt Adjustment, Indoor, IP20

Item Number: CLP723419

The Wiser Indoor IP Camera provides day and night HD video recording, with 340° panning view, motion detection notification alerts, intercom and event or continuous recording. Simple and intuitive control via the Wiser by SE App from anywhere. Use standalone or integrate into the Wiser smart home system and Automations. It can be mounted on the ceiling or placed on a table top.



Qty UoM EAN Colour



Product brand




Product or component type


Device application


Colour tint


Sustainable offer status

Green Premium product


Power consumption in w

10 W

Communication network type

wireless Zigbee (2.4-2.4 GHz), 2.5 mW at < 50 m

Integrated connection type

micro USB port for power supply

Communication port protocol



lens: 4 mm

Operating distance

7 m for IR LED

Function available

video motion detection|follow and track motion

Type of installation



129 mm

Net weight

298 g

Ip degree of protection


Ambient air temperature for operation

-10...45 °C

Ambient air temperature for storage

-20...60 °C

Relative humidity

95 % maximum

Product certifications


Reach regulation

Reference contains Substances of Very High Concern above the threshold

Eu rohs directive

Compliant with Exemptions

Mercury free


Rohs exemption information


China rohs regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental disclosure


Circularity profile



Device composition

8 infrared LED




Package 1 bare product quantity


Concentrator compatibility

Wiser hub generation 1

Mobile app name

Wiser by SE

Main colour tint


[us] rated supply voltage

5 V

Maximum supply current

2 A

Network type


Data storage equipment

micro SD card, up to 128 GB


20 MHz|40 MHz

Maximum number of supported devices

8 per network

Technology type

CMOS|digital WDR (wide dynamic range)



Pixel resolution

2 megapixel

View angle horiz x vert

80° horizontal|40° vertical

Operating mode

pan at 0-340 °|tilt at -75-75 °

Audio system control module type

full duplex

Audio video coding standard


Display resolution

1080 pixels

Transmission rate

1.2 Mbit/s

Camera frame rate

20 fps

Data recording

event logs

Encryption protocol



72.5 mm

Unit type of package 1


Number of units in package 1


Package 1 height

8.5 cm

Package 1 width

18.3 cm

Package 1 length

13.5 cm

Package 1 weight

530.0 g

Unit type of package 2


Number of units in package 2


Package 2 height

30.0 cm

Package 2 width

30.0 cm

Package 2 length

40.0 cm

Package 2 weight

6.87 kg

Unit type of package 3


Number of units in package 3


Package 3 height

105.0 cm

Package 3 width

114.0 cm

Package 3 length

114.0 cm

Package 3 weight

143.66 kg


The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Show all specifications

Frequently Asked Questions

hide show

If my Wiser Camera loses internet connection is the footage still being recorded to the SD card installed?

Losing internet at the home where the Wiser Camera is installed does not interfere with the recording that the camera is doing. Once the internet is back up and the Wiser Camera is accessible again this footage will be accessible via the Playback feature.
NOTE – If there is loss of power to the Wiser Camera this will stop the recording which will continue upon powering back up.

Wiser IP Camera Troubleshooting

If the camera is not pairing, first check if the IP camera in proximity to the Modem/Router and therefore has WiFi signal.  
Then ensure the IP camera is being connected to 2.4GHz on the Wi-Fi router, noting the Camera operates on 2.4GHz only. If unsure, check the WiFi router settings to see whether ‘Band Steering’ is enabled or not. This should be disabled as it may attempt to force a 5.0GHz WiFi network to the camera rather than the 2.4Ghz.”
Make sure WiFi has access to the internet, this can be done by disabling mobile data and testing a video or web page.
If EZ Mode pairing is not working, try using QR mode to pair the camera. Tap “EZ Mode” in the top right corner of the screen to change pairing mode.

My Wiser switches are not responding to being pressed or control via Wiser by SE, what can I do to troubleshoot the issue?

Begin by taking note of the product/s that are not responding and are they doing anything else different from normal operation? For example, is the backlight flashing in a sequence, does the product respond to three presses and shows the pairing led colouring and what colours are seen. If what is suggested below does not resolve the switches not responding these details can assist the Tech Support team in diagnosing what is occurring.

Once this has been taken note of begin by power cycling your Wiser Hub. This can be done by removing the micro-USB where it connects to the Hub or by turning off the power outlet that supplies power to the Hub. Leave it off for 10 – 15 seconds and then reconnect the Wiser Hub and wait until it completes its reboot procedure at the end of which only 2 LED indicators should be visible on the Wiser Hub. With LEDs at top of Hub - if connected with Ethernet cable (Right and Left Led will turn ON). If connect via WiFi (Middle and Right Led will turn ON)

If this fails to resolve the issue the product failing to respond may need to be power cycled itself. If confidant and able, access the switchboard that has the RCBO’s or Circuit breakers that supply power to the products. Turn the applicable supply off for 10 – 15 seconds and then turn this supply back on.

Note: If uncertain contact your installing electrician for the Wiser system who may advise what is supplying power to the Wiser products. If fuses are installed in your switchboard it is recommended to have your electrician remove the fuse and then re-fit after 10 – 15 seconds. Fuses can be extremely dangerous if not correctly handled by a qualified electrician.

If the switches are still unresponsive contact Tech Support via phone – Australia: 13 73 28 (13 SEAU) New Zealand 0800 652 999, email - or via online chat through a link on our support page or