Quantcast

Wiser Micro Module Dimmer

Wiser Micro Module Dimmer

Wiser Micro Module Dimmer

Item Number: CLP5010-0001

Product Dimensions

Width icon

Width43 mm

Height icon

Height43 mm

Depth icon

Depth22 mm

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Device application

light control

Colour tint

dark grey

Surface finish

matt

Sustainable offer status

Green Premium product

Product brand

Clipsal

Range

Wiser

Product or component type

connected dimmer

Physical

Device presentation

micro module

Dimmer type

universal

Load type

  • LED lamp: 5...100 VA at 230 V AC (RC LED mode)
  • LED lamp: 5...20 VA at 230 V AC (RL LED mode)
  • incandescent lamp: 14...200 W at 230 V AC
  • halogen lamp: 14...150 W at 230 V AC
  • LV halogen lamps: 14...200 VA at 12 V AC (electronic transformer)
  • LV halogen lamps: 14...150 VA at 12 V AC (wound transformer)

[Ue] rated operational voltage

220...240 V AC 50/60 Hz

Protection type

  • automatic overload protection
  • overheating protection
  • short-circuit protection

Local signalling

programming indication: 1 LED (green/red)

Control type

  • local control dimming up/down control
  • local control automatic load detection
  • remote control by auxiliary push-button on/off switching
  • remote control by auxiliary push-button dimming up/down control
  • remote control Wiser App on/off switching
  • remote control Wiser App dimming up/down control
  • remote control Wiser App device programming

Communication network type

wireless (2.4-2.4 GHz), 2.5 mW

Wiring configuration

without neutral

Connections - terminals

screw terminal

Clamping connection capacity

  • 1 x 1.5...2 x 2.5 mm² for solid cable(s)
  • 1 x 1.5...2 x 2.5 mm² for solid stranded cable(s)

Mounting support

  • wall
  • installation box

Device mounting

flush

Type of installation

indoor installation

Depth

22 mm

Width

43 mm

Height

43 mm

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Compliant

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental Disclosure

ENVPEP1705012

Circularity Profile

ENVEOLI1705012

Range compatibility

Wiser

Others

Standby consumption

max. 0.4 W

Associated fuse rating

16 A

Number of outputs

1

Software name

  • Wiser App: dimming range control
  • Wiser App: overtravel control
  • Wiser App: program the switching time
  • Wiser App: enable timer mode
  • Wiser App: management of the dimming mode
  • Wiser App: enable switch-on brightness/memory function
  • Wiser App: enable timer mode/overtravel time
  • Wiser App: upgrade device firmware
  • Wiser App: load control

Maximum number of connected devices

Bluetooth: 15 (smart device)

System requirements

  • Android 5.1 or higher Wiser App
  • Apple iOS 10.3 or higher Wiser App
  • Bluetooth 4.1 or higher Bluetooth
  • Wiser Home Touch Wiser Home control

Connected auxiliaries

maximum 10 auxiliary push-buttons, distance : 50 m

Number of loop terminals

2

Shape of screw head

pozidriv No 1 and combi

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

62.0 g

Package 1 Height

5.2 cm

Package 1 width

7.5 cm

Package 1 Length

7.5 cm

Type number

W50100
Show all specifications

Frequently Asked Questions

hide show

How do I swap my Wiser connected switch and dimmer devices from BLE to Zigbee?

To swap from Bluetooth to Zigbee you will need to short press the mechanism 12 times - and allow time for the device to swap modes, this will take roughly 40 seconds. Initially when swapped to Zigbee mode the LED indicator on the mechanism will flash amber indicating it is in pairing mode. If not paired to after roughly 50 seconds this will become solid amber. This amber indicator will remain on until paired with a Hub, the mechanism will function as normal while this indicator is on.

NOTE: Before swapping from Bluetooth/BLE to Zigbee it is strongly recommended that a factory reset be performed on the mechanism before initiating the change.
 

In the Wiser by SE App, why is my device/s (BLE/Zigbee) greyed out?

Check if you have changed the device/s from BLE to Zigbee mode. Once the mode is changed, the device will lose connection and require manual deletion.

Zigbee – Check that your router, device and Hub are powered. If you are not connected to the local WiFi associated with the Hub you will also need to check if your router and hub are still connected to the internet.

BLE – Check if you are in range of the device and does the device still have power
 

Can 2 way dimming be operated with push button dimmer 4061E2PUDM?

No, unfortunately this is not possible as it is a 1 way mechanism. When power is lost to this mechanism it is restored to its off state wich can ONLY be triggered by that switch and not an additional switch.
If Multi-way pushbutton dimming is required it is recommended to use the Wiser Micro Dimmer Module and Bell press mechanisms ( CLP5010-0001 and 60PBBP)
This setup allows a short press to turn on and off the dimmer while a long press will ramp up or ramp down the dimmer.( see attached for wiring diagram)
For further information please visit https://www.clipsal.com/products/detail?CatNo=CLP5010-0001&backto=/search?q=CLP&tab-document-1=0&itemno=CLP5010-0001
Wiser micro module dimmer

 

Can 2 way push button dimming be used in Saturn Zen

2 way dimming is available in as push button in Saturn Zen
Can be done with 2 X Bell press mechs ( Z4061VH + 60PBBPL )and 1 X Micro Module
See links below for further information:
https://www.clipsal.com/products/detail?CatNo=60PBBPL&tab-document-1=0&itemno=60PBBPL
https://www.clipsal.com/products/detail?CatNo=Z4061VH&tab-document-1=0&itemno=Z4061VH-ZW
https://www.clipsal.com/products/detail?CatNo=CLP5010-0001&tab-document-1=0&itemno=CLP5010-0001

I have made name changes to my Wiser devices in Wiser by SE how can I get these changes to work with Google voice control?

When setting up Google home and voice control make sure that any changes that are made to devices in Wiser by SE in the naming of mechs or adding/removing items are done on the device that the speaker is linked within google home. Making sure to refresh the Google Home App after the changes are made in Wiser by SE.

The changes will not be recognized If they are done on a device that is not the creator of the Home within the Google Home App that is linked with the voice control speaker. This can be solved by having the creator refresh his Google Home.
Note: Only one Wiser by SE account should be linked with Google home per household. This person should then create the home within Google Home and add members to this home. If more than one Wiser by SE account in the same home is linked to Google Home this can create ‘doubles’ of the Wiser devices within the Google Home App.