Harmony Control Relays Modular frequency Control Relay 5A, 1CO+1CO, 120…277V AC
Item Number: RM35HZ21FM
Datasheet
Specifications
Design
Range of product
Product or component type
Warranty
Physical
Connections - terminals
[in] rated current
Width
Marking
- CE : 73/23/EEC
- CE : EMC 89/336/EEC
Insulation resistance
- > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
- > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1
- > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5
- > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1
- > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
- > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
Connections - terminals
- screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
- screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
- screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
- screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
Mounting support
Electrical durability
Mechanical durability
Control type
Standards
- IEC 60255-6
- NF EN 60255-6
Product certifications
- GL
- UL
- CSA
- C-Tick
- GOST
Ambient air temperature for storage
Ambient air temperature for operation
Relative humidity
Ip degree of protection
- IP20 (terminals) conforming to IEC 60529
- IP30 (casing) conforming to IEC 60529
Mercury free
Environmental disclosure
Eu rohs directive
Reach regulation
China rohs regulation
California proposition 65
Material
Contacts material
Others
Package 1 bare product quantity
Legacy weee scope
Package 2 bare product quantity
Weee label
Average percentage of recycled plastic content
Relay type
Relay name
Relay monitored parameters
Time delay type
Switching capacity in va
Minimum switching current
Maximum power consumption in va
Measurement range
Utilisation category
- AC-12 conforming to IEC 60947-5-1
- AC-13 conforming to IEC 60947-5-1
- AC-14 conforming to IEC 60947-5-1
- AC-15 conforming to IEC 60947-5-1
- DC-12 conforming to IEC 60947-5-1
- DC-13 conforming to IEC 60947-5-1
- DC-14 conforming to IEC 60947-5-1
[uc] control circuit voltage
Contacts type and composition
Reset time
Maximum switching voltage
[us] rated supply voltage
[us] rated supply voltage
Supply voltage limits
Control circuit frequency
Output contacts
Nominal output current
Input frequency
Maximum measuring cycle
Run-up delay at power-up
Hysteresis
Measurement accuracy
- +/- 10 % of the full scale value in input
- +/- 10 % of the full scale value in time delay
Repeat accuracy
- +/- 0.5 % for input and measurement circuit
- +/- 0.5 % for time delay
Measurement error
- +/- 0.05 %/°C with temperature variation
- < +/- 1 % over the whole range with voltage variation
Threshold setting
- -2...10 Hz
- -10...2 Hz
Overvoltage category
[ui] rated insulation voltage
Control circuit voltage limits
Supply frequency
Insulation
Operating position
Tightening torque
Housing material
Status led
- 1 LED green for power ON
- 1 LED yellow for correct frequency (high R1)
- 1 LED yellow for correct frequency (low R2)
Operating rate
Compatibility code
Immunity to microbreaks
Electromagnetic compatibility
- emission standard for industrial environments conforming to IEC 61000-6-4
- emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3
- immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Vibration resistance
- 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1
- 1 gn (f= 57.6-150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1
Shock resistance
Pollution degree
Dielectric test voltage
Non-dissipating shock wave
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Unit type of package 2
Number of units in package 2
Package 2 height
Package 2 width
Package 2 length
Package 2 weight
Green premium status for reporting
Total lifecycle carbon footprint
Carbon footprint of the manufacturing phase [a1 to a3]
Carbon footprint of the manufacturing phase [a1 to a3]
Carbon footprint of the distribution phase [a4]
Carbon footprint of the distribution phase [a4]
Carbon footprint of the installation phase [a5]
Carbon footprint of the installation phase [a5]
Carbon footprint of the use phase [b2, b3, b4, b6]
Carbon footprint of the use phase [b2, b3, b4, b6]
Sustainable packaging
Carbon footprint of the end-of-life phase [c1 to c4]
Carbon footprint of the end-of-life phase [c1 to c4]
Take-back
Product contributes to saved and avoided emissions
Removable battery
Total lifecycle carbon footprint
Average percentage of recycled metal content
Packaging made with recycled cardboard
Packaging without single use plastic
End of life manual availability
Take-back
Warranty (in months)
Documents & downloads
hide show-
All
-
CAD Files and Packs
-
Technical Data Catalogues
-
End of Life Manual
-
Environmental Disclosure
-
Installation Instruction
-
Technical illustration
-
Application Notes
-
Certificates (MSDS)
-
eTechPub
-
Declaration of Conformity
-
Declaration of Conformity (Sustainability)