Altivar 312 Variable speed drive ATV312 11kW, 25kVA, 397 W, 380..500 V, 3-phase supply
Item Number: ATV312HD11N4
Specifications
Design
Product destination
Range of product
Product or component type
Warranty
Physical
Supply
- internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection
- internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection
Ip degree of protection
- IP20 on upper part without cover plate
- IP21 on connection terminals
- IP31 on upper part
- IP41 on upper part
Communication port protocol
- Modbus
- CANopen
Insulation resistance
Local signalling
- 1 LED (red) for drive voltage
- four 7-segment display units for CANopen bus status
Connector type
Protection type
- input phase breaks: drive
- line supply overvoltage and undervoltage safety circuits: drive
- line supply phase loss safety function, for three phases supply: drive
- motor phase breaks: drive
- overcurrent between output phases and earth (on power up only): drive
- overheating protection: drive
- short-circuit between motor phases: drive
- thermal protection: motor
Width
Height
Depth
Net weight
Relative humidity
- 5...95 % without condensation conforming to IEC 60068...2-3
- 5...95 % without dripping water conforming to IEC 60068...2-3
Product certifications
- UL
- CSA
- NOM
- C-Tick
- GOST
- DNV
Marking
Standards
- IEC 61800-5-1
- IEC 61800-3
Ambient air temperature for operation
- -10...50 °C without derating (with protective cover on top of the drive)
- -10...60 °C with derating factor (without protective cover on top of the drive)
Ambient air temperature for storage
Mercury free
Rohs exemption information
Eu rohs directive
China rohs regulation
California proposition 65
Others
Legacy weee scope
Package 1 bare product quantity
Weee label
Component name
Motor power kw
Motor power hp
Supply frequency
Network number of phases
Line current
- 37.2 A at 380 V, Isc = 22 kA
- 28.4 A at 500 V
Apparent power
Maximum transient current
Power dissipation in w
Speed range
Electrical connection
- Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5-2.5 mm² AWG 14
- L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 25-25 mm² AWG 3
Option card
- communication card for CANopen daisy chain
- communication card for DeviceNet
- communication card for Fipio
- communication card for Modbus TCP
- communication card for Profibus DP
Product specific application
[us] rated supply voltage
Emc filter
Supply voltage limits
Continuous output current
Output frequency
Switching frequency
Braking torque
- 150 % during 60 s with braking resistor
- 100 % with braking resistor continuously
- 150 % without braking resistor
Output voltage
Tightening torque
- Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6...0.6 N.m
- L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 4.5...4.5 N.m
Insulation
Analogue input type
- AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm
- AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm
- AI3 configurable current 0...20 mA, impedance: 250 Ohm
Sampling duration
- AI1, AI2, AI3: 8 ms analog
- LI1...LI6: 4 ms discrete
Response time
- AOV, AOC 8 ms for analog
- R1A, R1B, R1C, R2A, R2B 8 ms for discrete
Linearity error
Analogue output type
- AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits
- AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits
Discrete input logic
- logic input not wired (LI1...LI4), < 13 V (state 1)
- negative logic (source) (LI1...LI6), > 19 V (state 0)
- positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)
Discrete output type
- configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
- configurable relay logic: (R2A, R2B) NC - 100000 cycles
Minimum switching current
Maximum switching current
- R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
- R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
- R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
- R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms
Discrete input type
Time constant
Frequency resolution
- analog input: 0.1...100 Hz
- display unit: 0.1 Hz
Transmission rate
- 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen
- 4800, 9600 or 19200 bps for Modbus
Number of addresses
- 1...127 for CANopen
- 1...247 for Modbus
Number of drive
- 127 for CANopen
- 31 for Modbus
Outer dimension
- 555 x 234 x 268 mm
- 390 x 245 x 190 mm
- 405 x 234 x 268 mm
- 330 x 245 x 190 mm
Discrete input number
Discrete output number
Analogue input number
Analogue output number
Physical interface
Transmission frame
Asynchronous motor control profile
- factory set : constant torque
- sensorless flux vector control with PWM type motor control signal
Transient overtorque
Acceleration and deceleration ramps
- linear adjustable separately from 0.1 to 999.9 s
- S, U or customized
Motor slip compensation
- suppressable
- automatic whatever the load
- adjustable
Nominal switching frequency
Braking to standstill
Network frequency
Prospective line isc
Dielectric strength
- 2410 V DC between earth and power terminals
- 3400 V AC between control and power terminals
Protective treatment
Vibration resistance
- 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
- 1.5 mm (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance
Operating altitude
- <= 1000 m without derating
- 1000...3000 m with current derating 1 % per 100 m
Operating position
Assembly style
Electromagnetic compatibility
- 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
- electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Regulation loop
Pollution degree
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Unit type of package 2
Number of units in package 2
Package 2 height
Package 2 width
Package 2 length
Package 2 weight
Sustainable packaging
Product contributes to saved and avoided emissions
Weee label
Warranty (in months)
Documents & downloads
hide show-
All
-
CAD Files and Packs
-
Technical Data Catalogues
-
Installation Instruction
-
End of Life Manual
-
Operating Manuals
-
Certificates (MSDS)
-
Declaration of Conformity
-
Declaration of Conformity (Sustainability)
-
Software - Data Library
Remote Keypad for Altivar 312 and 320 Drives Installation Instructions
VERSION
2.0
DATE
25 Oct 2024
REVISION
2.0
Altivar 31, 312, and 32 Motor Cable Installation Guidelines for Baggage Conveyance Applications
VERSION
1.0
DATE
05 Mar 2024
REVISION
1.0
Instruction Sheet substitution ATV31-ATV312
VERSION
1.1
DATE
29 Sep 2023
REVISION
1.1
Remote Keypad for Altivar™ 312 and 320 Drives Instruction Sheet
VERSION
1.0
DATE
27 Mar 2023
REVISION
1.0
Instruction Sheet: China RoHS - Hazardous Substances Table
VERSION
1.0
DATE
29 Mar 2022
REVISION
1.0
1) ATV312 getting Started
VERSION
4.0
DATE
29 Sep 2023
REVISION
4.0
ATV312 to ATV320 Migration Manual
VERSION
1.0
DATE
29 Sep 2023
REVISION
1.0
Getting started with ATV312 - User Guide
VERSION
1.0
DATE
30 Mar 2023
REVISION
1.0
1) ATV312 Getting Stated Annex : SCCR
VERSION
2.0
DATE
02 Aug 2022
REVISION
2.0
3) ATV312 programming manual
VERSION
4.0
DATE
02 Aug 2022
REVISION
4.0
2_ATV312 Installation Manual
VERSION
2.0
DATE
02 Aug 2022
REVISION
2.0
ATV312HD11N4 China RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 China RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 China RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 China RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 China RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 China RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 China RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 China RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
ATV312HD11N4 EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0