Quantcast

Clipsal Wiser Micro Module Smart Dimmer 200 W Max, 240 V, Grey

Clipsal Wiser Micro Module Smart Dimmer 200 W Max, 240 V, Grey

Clipsal Wiser Micro Module Smart Dimmer 200 W Max, 240 V, Grey

Item Number: CLP5010WDZ

The Wiser Micro Module Smart Dimmer combines smart dimmer functionality with bell press push-button switches. It transforms a conventional push-button switch into a connected device you can control from the switch or through the Wiser by SE app.

Datasheet

Wiser Technical Catalogue

Download (PDF 7.4MB)

Specifications

Design

Product brand

Clipsal

Range

Iconic

Product or component type

connected dimmer

Device application

light control

Colour tint

grey

Sustainable offer status

Green Premium product

Physical

Range compatibility

Wiser hub

Device presentation

micro module

Dimmer type

universal

Load type

  • dimmable LED: 0...150 W
  • compact fluorescent lamp: 0...200 W
  • incandescent lamp: 0...200 W at 240 V
  • halogen lamp: 0...200 W at 240 V
  • LV halogen lamps: 0...200 W (electronic transformer)

[Ue] rated operational voltage

220...240 V AC 50 Hz

Protection type

  • overheating protection
  • short-circuit protection
  • overcurrent protection

Control type

  • push-button
  • by mobile application

Wiring configuration

2-wire

Mounting support

  • wall
  • installation box

Type of installation

indoor installation

Embedding depth

40 mm

IP degree of protection

IP20

Relative humidity

5...90 % non-condensing

Standards

  • AS/NZS 60669.2.1 safety
  • AS/NZS 60669.2.1 EMC
  • AS/NZS 4268 radio

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Compliant

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

X

Environmental Disclosure

ENVPEP1705012

Circularity Profile

ENVEOLI1705012

Material

Material

plastic

Others

Number of ways

5 ways

Software name

Wiser by SE App

Technology type

Zigbee

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

80.0 g

Package 1 Height

5.2 cm

Package 1 width

7.5 cm

Package 1 Length

7.5 cm

Unit Type of Package 2

S02

Number of Units in Package 2

40

Package 2 Weight

3.68 kg

Package 2 Height

15.0 cm

Package 2 width

30.0 cm

Package 2 Length

40.0 cm

Unit Type of Package 3

P06

Number of Units in Package 3

640

Package 3 Weight

73.88 kg

Package 3 Height

75.0 cm

Package 3 width

60.0 cm

Package 3 Length

80.0 cm
Show all specifications

Frequently Asked Questions

hide show

Where can I find the files and how to update the firmware on my Zigbee Wiser devices when I don’t have the Wiser Hub?

Firmware for the Wiser devices is updated via the Wiser by SE app and is done via the mode of connection. If your device is connected in Bluetooth in Wiser by SE, you will have access to Bluetooth firmware updates and if your Wiser device is connected in Zigbee via the Wiser Hub to Wiser by SE, you will have access to Zigbee firmware updates.
Without the Wiser Hub you will be unable to connect Wiser devices via Zigbee in Wiser by SE and therefore will be unable to update your devices. 
We do not offer any other methods for updating firmware on the devices.
 

My Wiser switches are not responding to being pressed or control via Wiser by SE, what can I do to troubleshoot the issue?

Begin by taking note of the product/s that are not responding and are they doing anything else different from normal operation? For example, is the backlight flashing in a sequence, does the product respond to three presses and shows the pairing led colouring and what colours are seen. If what is suggested below does not resolve the switches not responding these details can assist the Tech Support team in diagnosing what is occurring.

Once this has been taken note of begin by power cycling your Wiser Hub. This can be done by removing the micro-USB where it connects to the Hub or by turning off the power outlet that supplies power to the Hub. Leave it off for 10 – 15 seconds and then reconnect the Wiser Hub and wait until it completes its reboot procedure at the end of which only 2 LED indicators should be visible on the Wiser Hub. With LEDs at top of Hub - if connected with Ethernet cable (Right and Left Led will turn ON). If connect via WiFi (Middle and Right Led will turn ON)

If this fails to resolve the issue the product failing to respond may need to be power cycled itself. If confidant and able, access the switchboard that has the RCBO’s or Circuit breakers that supply power to the products. Turn the applicable supply off for 10 – 15 seconds and then turn this supply back on.

Note: If uncertain contact your installing electrician for the Wiser system who may advise what is supplying power to the Wiser products. If fuses are installed in your switchboard it is recommended to have your electrician remove the fuse and then re-fit after 10 – 15 seconds. Fuses can be extremely dangerous if not correctly handled by a qualified electrician.

If the switches are still unresponsive contact Tech Support via phone – Australia: 13 73 28 (13 SEAU) New Zealand 0800 652 999, email - techsupport.pz@se.com or via online chat through a link on our support page https://www.clipsal.com/clipsal-support/contact-us or https://www.pdl.co.nz/support
 

Can I trigger a moment/scene from a Wiser wall switch?

Yes. When a number of Wiser switches/dimmers are paired with the Wiser Hub, this can be achieved with the use of an Automation and would consist of - Condition: Device status = On, Action = Enable or Disable Automation/Trigger Moment, Delay 1s, Run the device = Off.
 

Note: Only 1 moment can be used within an automation

How do I swap my Wiser connected switch and dimmer devices from BLE to Zigbee?

To swap from Bluetooth to Zigbee you will need to short press the mechanism 12 times - and allow time for the device to swap modes, this will take roughly 40 seconds. Initially when swapped to Zigbee mode the LED indicator on the mechanism will flash amber indicating it is in pairing mode. If not paired to after roughly 50 seconds this will become solid amber. This amber indicator will remain on until paired with a Hub, the mechanism will function as normal while this indicator is on.

NOTE: Before swapping from Bluetooth/BLE to Zigbee it is strongly recommended that a factory reset be performed on the mechanism before initiating the change.
 

In the Wiser by SE App, why is my device/s (BLE/Zigbee) greyed out?

Check if you have changed the device/s from BLE to Zigbee mode. Once the mode is changed, the device will lose connection and require manual deletion.

Zigbee – Check that your router, device and Hub are powered. If you are not connected to the local WiFi associated with the Hub you will also need to check if your router and hub are still connected to the internet.

BLE – Check if you are in range of the device and does the device still have power
 

I have made name changes to my Wiser devices in Wiser by SE how can I get these changes to work with Google voice control?

When setting up Google home and voice control make sure that any changes that are made to devices in Wiser by SE in the naming of mechs or adding/removing items are done on the device that the speaker is linked within google home. Making sure to refresh the Google Home App after the changes are made in Wiser by SE.

The changes will not be recognized If they are done on a device that is not the creator of the Home within the Google Home App that is linked with the voice control speaker. This can be solved by having the creator refresh his Google Home.
Note: Only one Wiser by SE account should be linked with Google home per household. This person should then create the home within Google Home and add members to this home. If more than one Wiser by SE account in the same home is linked to Google Home this can create ‘doubles’ of the Wiser devices within the Google Home App.
 
Show More
Installing Wiser Micro Module Switch/ Dimmer

Features

  • Combines the advantages of smart switch/ dimmer functionality with ordinary momentary (bell press) push-button switches
  • Transforms a conventional push-button switch into a connected device you can control from the switch or through the Clipsal Wiser by SE app
  • Up to 10 momentary push-button switches can be connected to control a connected load
  • Device can switch ohmic, inductive or capacitive loads
  • Switch has voltage free relay contracts (e.g. for controlling a garage door motor)
  • IP20
Wiser products in kitchen

Range

A Clipsal Wiser Smart Home enables you to personalise your home to fit your needs and manage it with one simple app. It’s a simple solution that can be easily integrated into any home, old or new.

All Wiser Smart Home products are also compatible with most of Clipsal’s existing wiring devices, including the Iconic switch range, making design and function upgrades simple and seamless.

With Google Home or Amazon Echo, you can also control your Clipsal Wiser Smart Home with voice commands.

With a Clipsal Wiser Smart Home, you can take control of your home the way that it suits you.