switch 3gang arch 10a 250v

Flush Switch, 3 Gang, 250VAC, 10A, Architrave

Catalogue Number: 33A
switch 3gang arch 10a 250v
Colour: White Electric
Colour: Per UOM Std.
  • Black 1 PCE
  • Cream 1 PCE
  • White Electric 1 PCE
Added to cart

Specifications

hide show
Range of product
Standard Series
Product brand
Clipsal
Device presentation
basic element with full cover plate
Switch function
1-pole
Actuator
rocker
Number of rocker
3
Number of poles
1
Device mounting
flush
Fixing mode
by screws
Local signalling
without
[Ue] rated operational voltage
250 V AC
Rated current
10 A
Marking
without marking
Sustainable offer status
Green Premium product
REACh Regulation
Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure
ENVPEP120506EN

Documents & downloads

hide show
Filter items
  • All

  • Technical Data Catalogues

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What is the part number of a 23A -32A overload to fit LC1D40U7 contactor?

LRD3353 is a 23A -32A overload to fit LC1D40U7 contactor. 
For further information, please visit https://www.schneider-electric.com/en/product/LRD3353/tesys-lrd-thermal-overload-relays---23...32-a---class-10a



 

Is the PDL 30A switched

 No it is not

Is there a 35A double pole mechanism?

No. We have 30M35 which is 1 pole, 35A mech.

What is the code for a 32A mech for Saturn 406* plates?

There is no 32A mech that fits directly into the 406* plates,
The 60R32-** and 60R32COOK-** will only fit into the extra switch position on the 4025XA-**

For a standard plate with a 32A mech you will need to use a 403* plate with a 30 series 35A mech, 30M35

Is there a 35A Mech that fits the extra switch in the Saturn Series double power point 4025XA available? ?

No unfortunately this part is unavailable. However, we have a 32A 60Series Mech that will fit the double power point 4025XA.
The part number is 60R32

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60R32

What is the AC3 rating of a PDL 56SW363/2

The AC3 rating is 18.5kw, 35A

Do you have a 35A mech that says hot plate?

Yes, we do have a 35A mech that says hot plate. 

The part number is 30M35-HPLATE.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30M35-HPLATE.

What do I need to put together a single phase 30A 56 Series RCD

Use 56CB4 + A9R51240 40amp RCCB

What is the part number for a 3 phase 63A RCD?

The part number for a 3 phase 63A RCD RCD463/30.

 

 

Can you get the 4025X with a 35A mechanism?

No unfortunately that particular switch only comes in 10A and is not removable.

However, the 4025XA has a removable mechanism and can be replaced with the mechanism 60R32 which is a 32A mechanism.

Some of the key features are:

  • Saturn Series
  • 10A
  • 250V
  • Extra removable switch
  • Various colours available

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4025XA



 

Does Conext SW require any special setup for 120V operation?

No. Simply by connecting loads across L1-N output, the Conext SW will provide 75% of rated power (due to imbalance). 
By connecting a 120V input source across L1-N input, draw from AC input will be limited to 15A (CSW4024) or 13A (CSW2524) 
for charging and pass-thru combined.

Does the normal PDL681 have an IP56 rating?

No it doesn't, but you can use the PDL681VWP as this is IP56 rated.
Refer to PDL Catalogue and Pricing Guide Issue 70, page 33.

What are the dimensions for the standard range 4 gang architrave switch, 34A?

The dimensions for the standard range 4 gang architrave switch , 34A are - L140mm x W32mm x D10mm

 

Can I fit a 50A fuse in to a 63A PDL 760

Yes

ZB5AA343 - what is the Cap with arrow up not the word UP ?

The  Cap supplied not clipped in - allowing orientation of arrow in 4 directions
Part Code =  ZB5AA334 or 335 in black or white

What is the air flow of the 6500ADS?

The air flow of the 6500ADS is 338 cubic meters per hour or 290 cubic meters per hour if you have a backdraught shutter fittered.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=6500ADS

What is the part number for a 5 pin 63A appliance inlet?

The part number is a E563CR.

I want a 56series 5 pin 63A socket

This is available in Wilco only WMC563

What is the part code for a 3P Switch 63A AC3

The part code is VCF5

What is the part number for a 3 pole, 6KA, 63A breaker?

The part number for a 3 pole, 6KA, 63A breaker is A9F44363

A9F44363
Acti9 iC60N 3P 63A C Miniature Circuit breaker
For more information see:
https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=A9F44363

Is there a 32A version of the 1439/20?

No, 20A is the largest size in this model plug.

What is the part number for a 5 pin 63A appliance inlet?

The part number for a 5 pin 63A appliance inlet WMB563R.


 

What is the Socket Interior for a WMB563 5 pin 63A outlet?

The Socket Interior for a WMB563 5 pin 63A outlet is a SP-116490.

How do I dispose / recycle APC batteries?

Phone 0800 333 373 APC technical team in the Phillipines or go to the website: recycle.apcpacific.com/nz
 

Is there a 35A Mech for Saturn Zen Series

No there is no saturn mech available. There is either the Z4061/45 cooker switch plate or the 30M35 in a Z4031VH Plate

Explanation of circuit breakers in 30 amp rPDU's

Product Line
  • Rack Power Distribution
    • AP7XXX, AP7XXXB, AP8XXX series

Environment
  • All serial numbers

Resolution
Circuit breakers are in place to protect the branch circuit and its conductors. With respect to a 30A breaker, all components employed in the circuit (downstream from the circuit breaker) shall be rated for 30A use. In a scenario where a 30A circuit breaker is providing power to a 20A rated outlet, the outlet, load plug, load cord and load are rated for 20A use, thus sized for this rating. In this scenario there is inadequate protection for the outlet and all connected equipment, and potentially (and most harmfully) the conductor that is supplying the outlets themselves.

In North America, Canada, and Europe, PDU's are evaluated under UL/CSA/EN/IEC 60950-1. This standard requires circuit breaker protection when the rating of an output is less than the rating of the input. A PDU with a 30A input plug and 20A receptacles must have circuit breakers. Section 2.7 of the 60950 standard states: "Protective devices necessary to comply with the requirements of 5.3* must be included as part of the equipment" 

*5.3 is the evaluation of abnormal operating and fault conditions.


In North America, the requirement is based on NFPA 70, the National Electrical Code. In general, in the United States, you can have any outlet rated less than 20A protected by a 20A breaker. However, these outlets must have protection rated no less than the outlet rating and no more than 20A. A 30A outlet must be protected by a 30A breaker and may not have anything larger or smaller.

Europe has very similar rules to North America. The main difference is the rating of receptacles and breakers. In Europe, you typically have 10A or 16A outlets protected by a 16A breaker, but the breaker rating can be no more than 16A.

Canada places additional restrictions. In Canada, a 15A outlet must be protected by a 15A breaker. The only exception is the "T-Slot" 20A outlet that accepts either 15A or 20A plugs. This outlet may be protected at 20A.


If a PDU has a 30A plug and 30A receptacles, it will not require and internal circuit breaker. The 30A plug forces it to be plugged into a 30A branch circuit, which will have its own 30A breaker. The PDU can then rely on the branch circuit's breaker rather than an internal breaker.

If a PDU has a 30A plug and 20A receptacles, it must have internal 20A branch rated breakers for the receptacles. The 30A protection of the branch circuit is too high to be safe for the 20A outlets.

What is a 12vDC isolator for a 32A wind generator

Use a 56SW340KGGY

What is the PDL 600 Series modules for range switching

PDL 32A mechs

How to determine the Over and Under Range Alarm Modbus Register on a Scadapack models 314, 334 and 357 using Telepace Studio?

The SCADAPack 334 with 5607 I/O module is comprised of four types of I/O channels, digital inputs, digital outputs, analog inputs, and analog outputs.

The digital input assignment provides twenty four I/O channels for the digital input data from the SCADAPack 5607 I/O Module hardware. The digital input registers are updated continuously with data read from the digital inputs.

The 5607 I/O Module provides sixteen external digital inputs. These are externally wetted inputs.

The module provides 8 internal digital inputs, which indicate if the corresponding analog input is in or out of range.

See Configuration Example below:

Is there a 35A mechanism (Mech) for Saturn series?

The part number is 60R32 which is available in Artic Silver (colour code 3A - which suits the standard Saturn range), Charcoal (CC - for the Saturn Horizon range), Zen Black (ZB - for the Saturn Zen range) and Zen White (ZW - for the Saturn Zen range). This part is rated 32A suitable for the 4025XUA (standard Saturn) or Z4025XUA (Saturn Zen) which is a standard double GPO with an extra removable switch

Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.

Will a Wilco 5 pin 63A plug fit in a 66cv563 outlet?

Yes, the Wilco 5 pin 63A plug will fit in a 66CV563 outlet.

For further information please visit https://www.clipsal.com/Trade

 

What is the part number for 2 pole , 63A , 500V DC breaker?

The part number for 2 pole , 63A , 500V DC breaker is A9N61539

A9N61539 
miniature circuit breaker - C60H - 2 poles - 63 A - C curve 
For more information see: https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=A9N61539

How much power does Conext SW draw from the battery when turned off?

 How much power does Conext SW draw from the battery when turned off?




Approx .3ADC (8W) will be drawn from the battery even when Conext SW is turned off.
It does not draw any more than .3A (8W) when SCP is plugged in. 
This power draw is the same as when in SEARCH mode. 


What is the part code for a 63A 3P circuit breaker

Use a LV429003 frame and a 63Amp LV429032 trip unit.

What is the part name for a 5 pin, 63a extension socket?

The part name is as follows: WMP563R.

What is the replacement code for a 18371?

A9N18371
C120N 4P 63A C 10000A 415V MINIATURE CIR

What is the part code for a 63A 4P contactor with 4x N/C main contacts.

The part number is A9C20867.

Does the W870-8135 NetShelter key work on the combination handle AR8132A?

Issue: 
A customer claims that their new AR8132A door handles can be opened with the standard NetShelter 333 key: W870-8135. 

Product Line: 
NetShelter SX, AR8132A

Environment: 
All models, all serial numbers. 

Cause: 
The AR8132A uses a different key, but the standard 333 key will also open the lock. 

Resolution: 
The AR8132A will accept any key similar when the combination is set to the factory default of 000. 
Once a new combination is set, only the key included with the AR8132A will open the lock. 

L1 VME What Colour Does the PDL151 10 way 32A Connector Strip Come in ?

The PDL151 10 Way 32A Connector Strip Comes in White 

Are the PDL 32A solid fuse links still available?

No, the 32A solid fuse links are no longer available.

Do you have a 32A double pole 30 series mech?

No, the largest rated 30 series double pole switch mechanism is 20A.

What is the part number for the extra mechanism 32A that fits the 4025XU?

the part number is 60R32

What is the part number for a 4 pole 32A circuit breaker?

The part number is A9F54432.

What is a 32A 1phase C/O switch for Gen system in Fiji

Part number is 56SW332CO

What is a 32A inductive isolator for an induction cook top

Part number PDL 56SW150

What is the part code for a 1 pole, 32A RCBO

 Part code is 19777

What is the part code for a 1P 32A relay

 The part code is 15515

What is the rating on the Neutral for the PDL 56CV532

 The rating is 32A

Do we have a 56 series Flat pin 32A Connector?

 No not available

Do you have a 32A 4 pole Telemecanique contactor?

The Telemecanique contactors have now been rebadged as Schneider.
The part number for a 32A AC1 4 pole contactor with 240V coil is LC1DT32U7.

For further information please visit 
https://www.schneider-electric.com.au
Show More