Browse all
Browse all

Harmony Control Relays Modular liquid level Control Relay 5A, 1CO, 24...240V AC DC

Home ProductsIndustrialHarmonyModular liquid level Control Relay

Harmony Control Relays Modular liquid level Control Relay 5A, 1CO, 24...240V AC DC

Item Number: RM35LV14MW

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product Harmony Control Relays
Product or component type level control relay
Warranty 18 months

Physical

Connections - terminals screw connectors
[in] rated current 5 A
Marking
  • CE : EMC 89/336/EEC
  • CE : 73/23/EEC
Insulation resistance
  • > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
  • > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1
  • > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5
  • > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1
  • > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
  • > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
Connections - terminals
  • screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
  • screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
  • screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
  • screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Local signalling
  • LED (yellow) for relay ON
  • LED (green) for power ON
  • LED (yellow) for timer ON
Mounting support 35 mm symmetrical DIN rail conforming to IEC 60715
Electrical durability 100000 cycles
Mechanical durability 30000000 cycles
Width 35 mm
Control type without test button
Standards IEC 60255-6
Product certifications
  • GOST
  • CSA
  • UL
  • GL
  • C-Tick
Ambient air temperature for storage -40...70 °C
Ambient air temperature for operation -20...50 °C
Relative humidity 95 % at 55 °C conforming to IEC 60068...2-30
Ip degree of protection
  • IP20 (terminals) conforming to IEC 60529
  • IP30 (casing) conforming to IEC 60529
Mercury free Yes
Environmental disclosure ENVPEP1601004EN
Reach regulation Reference contains Substances of Very High Concern above the threshold
China rohs regulation X
Eu rohs directive Compliant By Exemption
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Legacy weee scope Out
At least in Europe
Package 1 bare product quantity 1
Average percentage of recycled plastic content 0 %
Warranty duration(in months) bmecat 18
Weee label No
Relay type level control relay
Relay name RM35L
Relay monitored parameters detection by discrete sensors
Time delay type adjustable 0.1...5 s, +/- 10 % Tt- time delay upon fault
Switching capacity in va 1250 VA
Minimum switching current 10 mA at 5 V DC
Maximum switching current 5 A AC/DC
Maximum power consumption in va 5 VA AC
Utilisation category
  • AC-12 conforming to IEC 60947-5-1
  • AC-13 conforming to IEC 60947-5-1
  • AC-14 conforming to IEC 60947-5-1
  • AC-15 conforming to IEC 60947-5-1
  • DC-12 conforming to IEC 60947-5-1
  • DC-13 conforming to IEC 60947-5-1
Contacts type and composition 2 C/O
[uc] control circuit voltage 24...240 V
Reset time
  • 1000 ms
  • 4000 ms
Maximum switching voltage 250 V AC/DC
[us] rated supply voltage 24...240 V AC/DC 50/60 Hz, non self-powered
Supply voltage limits 20.4...264 V AC/DC
Control circuit voltage limits - 15 % + 10 % Un
Maximum power consumption in w 1.5 W DC
Output contacts 1 C/O
Nominal output current 5 A
Run-up delay at power-up 0.5 s
Measurement accuracy
  • +/- 10 % of the full scale value
  • +/- 20 % for the HS range
Repeat accuracy +/- 2 % for time delay
Measurement error 0.5 %/°C with temperature variation
Sensitivity adjustment 5...100 %
Maximum supply current for sensors 40 mA
Cable capacitance 10 nF for probe cable
Overvoltage category III conforming to IEC 60664-1
[ui] rated insulation voltage 250 V conforming to IEC 60664-1
[uimp] rated impulse withstand voltage
  • 4 kV conforming to IEC 60255-5
  • 4 kV conforming to IEC 60664-1
  • 4 kV conforming to IEC 61000-4-5
Operating position any position without derating
Tightening torque 0.6...1 N.m conforming to IEC 60947...1
Housing material polycarbonate
Operating rate <= 360 operations/hour full load
Safety reliability data
  • B10d = 170000
  • MTTFd = 182.6 years
Functionality discrete sensor detection
Compatibility code RM3
Immunity to microbreaks
  • 100 ms DC
  • 90 ms AC
Electromagnetic compatibility
  • emission standard for industrial environments conforming to IEC 61000-6-4
  • emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3
  • immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Pollution degree 3 conforming to IEC 60664-1
Dielectric test voltage
  • 2 kV, 1 min AC 50 Hz conforming to IEC 60255-5
  • 2 kV, 1 min AC 50 Hz conforming to IEC 60664-1
Unit type of package 1 PCE
Number of units in package 1 1
Package 1 height 4.8 cm
Package 1 width 8 cm
Package 1 length 9.7 cm
Package 1 weight 133 g
Unit type of package 2 S03
Number of units in package 2 48
Package 2 height 30 cm
Package 2 width 30 cm
Package 2 length 40 cm
Package 2 weight 7.131 kg
Green premium status for reporting Green Premium product
Total lifecycle carbon footprint 60 kg CO2 eq.
Carbon footprint of the manufacturing phase [a1 to a3] 8.955836242001162
Carbon footprint of the manufacturing phase [a1 to a3] 9 kg CO2 eq.
Carbon footprint of the distribution phase [a4] 0.017391935718440953
Carbon footprint of the distribution phase [a4] 0 kg CO2 eq.
Carbon footprint of the installation phase [a5] 0.043154399360093076
Carbon footprint of the installation phase [a5] 0 kg CO2 eq.
Carbon footprint of the use phase [b2, b3, b4, b6] 50.262
Carbon footprint of the use phase [b2, b3, b4, b6] 50 kg CO2 eq.
Sustainable packaging Yes
Carbon footprint of the end-of-life phase [c1 to c4] 0.24968448225712625
Carbon footprint of the end-of-life phase [c1 to c4] 0.2 kg CO2 eq.
Take-back No
Product contributes to saved and avoided emissions No
Removable battery N/A
Total lifecycle carbon footprint 59.52806705933682
Average percentage of recycled metal content 0 %
Packaging made with recycled cardboard Yes
Packaging without single use plastic Yes
Scip number 4984708b-29c1-4c18-ac2d-be9b0477b6b5
China rohs label 5
End of life manual availability ENVEOLI1601004EN
Take-back No
Warranty (in months) 18

Documents & downloads

Filter items
  • All

  • CAD Files and Packs

  • Technical Data Catalogues

  • End of Life Manual

  • Environmental Disclosure

  • Installation Instruction

  • Technical illustration

  • Application Notes

  • Certificates (MSDS)

  • eTechPub

  • Declaration of Conformity

  • Declaration of Conformity (Sustainability)

Important: Some software files may need a mySchneider or Club login to download.