Cover Plate, Single Vertical

Cover Plate, Single Vertical

Cover Plate, Single Vertical

Item Number: M8000VC-WE

Retail
$9.85
RRP (Inc. GST)
Colour White Electric (WE)
  • White Electric 1 PCE
  • Black 1 PCE
  • Charcoal 1 PCE
  • Chrome 1 PCE
  • Champagne 1 PCE
  • Dark Blue 1 PCE
  • Gun Metal 1 PCE
  • Platinum 1 PCE
  • Red 1 PCE

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

PDL 800 Modena Series

Product brand

Clipsal

Physical

Marking

without marking

Mounting position

vertical

EU RoHS Directive

Under investigation

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Others

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

25 g

Package 1 Height

11 mm

Package 1 width

126 mm

Package 1 Length

87 mm
Show all specifications

Frequently Asked Questions

hide show

Can you get a S8000HC in Peruvian Clay?

No, we don't do the S8000HC in Peruvian Clay any more.

What is mech to suit M8080V

Part no 80MVL will suit M8080V plate

What is mech to suit Modeana M8080V ?

Part no 80MVL will suit complete plate M8080V

What is the part number for Modena, M8000,1 gang phone outlet( 6 way 4 contact)?

Below mentioned part numbers are needed to put together a Modena, 1 gang phone outlet.
M8031VH  - Assembled Grid and Cover Assemblies with adaptor to suit Clipsal 30 Series Mechanism, 1 Gang.
+
30RJ64SMT - 30 series, Cat 3, 6 way 4 contact socket mechanism "Telephone" (RJ12).
For further information, please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=M8031VH
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30RJ64SMT

 

What is part number for grid plate & cover to suit S8000VC/2?

The part number for grid plate & cover to suit S8000VC/2 is S8080V2.

What is the part number for the render bracket for the Modena range M8080H?


The part number for the render bracket for the Modena range M8080H is - 155P

For further information, visit the link below:-
https://www.clipsal.com/Trade/search-results?q=155P
User-added image

What is the part number for a mounting bracket for the M8080H2?

The part number for a mounting bracket for the M8080H2 is - 800FB2H

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=800FB2H
User-added image

ION over Modbus communications for PM8000 and ION7400 series meters

Issue
New features and improvements were made on firmware version v1.4.1 for the PM8000 and ION7400 meters. This attached document (TechnicalBulletin_ION-Modbus_v1.3) addresses issues related to replacing legacy products on a Modbus serial (RS-485) bus connected to PME systems.

ION over Modbus is a communications method that allows an ION master such as EcoStruxure™ Power Monitoring Expert or PowerLogic™ ION Setup software full access to all the ION modules inside the ION meter, while communicating using Modbus RTU protocol on the serial daisy chain.

The primary use of ION over Modbus is specifically for retrofit applications, where a Modbus meter such as the PowerLogic PM800 series meter is being replaced by an ION meter such as the PowerLogic PM8000 series meter on the RS-485 serial bus.

Product Line
PM8000
ION7400

Cause 
ION masters such as Power Monitoring Expert (PME) and ION Setup use ION protocol to communicate with an ION meter to access and manipulate the ION modules in the meter.  However, if the ION meter is added to a Modbus serial daisy chain, the ION meter must be configured as a Modbus device (i.e., protocol set to Modbus RTU) to allow Modbus masters access to the mapped Modbus registers in the ION meter.
 
PME and ION Setup use Modbus protocol to communicate with a Modbus gateway and the serial daisy-chained meters.  Historically, an ION meter that has been added as a Modbus RTU device in the Modbus serial daisy chain cannot be easily configured, i.e., PME or ION Setup cannot access the ION modules in the meter because the communications protocol is set to Modbus RTU, not ION. 

Resolution
All ION meters support the Modbus RTU protocol. Newer ION meter firmware adds ION over Modbus functionality. This enables an ION master such as Power Monitoring Expert or ION Setup to access all configuration and historical data in the meter while it is connected to a serial communications bus and configured as a Modbus RTU device

Updates are available for Power Monitoring Expert and ION Setup to support ION over Modbus for communication networks utilizing an Ethernet to serial gateway device to connect to the serial daisy chain.



Power Monitoring Expert and ION Setup currently do not support ION over Modbus communications for:
  • Direct Ethernet or direct serial communications connections.
  • Serial communications sites that use serial-to-serial communications converters such as an RS 232 to RS 485 converter or USB to RS 485 adapter.
  • Modem sites (telephone, radio or fiber optic).
Serial communications considerations
ION meters can generate larger volumes of historical data, events or waveforms, which might cause communications performance issues.  It is recommended not to exceed 10-15 devices wired on the same RS-485 daisy chain.


Prerequisites
To use ION over Modbus, both your ION meter and ION software must meet the minimum requirements:
ION meter
  • PM8000 firmware v1.4.1 or later
  • ION7400 firmware v1.4.1 or later
ION software
  • Power Monitoring Expert 8.2 CU1  (Cumulative Update #1) or later. This update is available for download from this Box link.
  • The latest version of ION Setup (available from Box at Schneider electric)

For more information on ION over Modbus Communication, review the attached Technical Bulletin.

What is the size of the PM8000's FTP site?

Issue:
What is the size of the PM8000's FTP site?

Product Line:
PM8000 series meters

Environment:
PM8000 FTP site memory

Cause
Unable to find the size of the FTP site memory

Resolution:
The FTP site for a PM8000 meter is approximately 350 MB in size.  This includes the directories for webpages, Comtrade, and IEC61850 files. The default webpages weigh in at around 5 MB. These can be removed to free up more FTP space, if required for custom web pages.

What is the bracket to suit the Strato Double vertical grid S8080V2?

 The part number for the bracket to suit the Strato Double vertical grid S8080V2 is 800FB2V.
Some of its key features are:
  • Double, vertical
  • Mounted onto either the face or side of studs
  • For timber framed buildings
  • to suit Strato

What is part number for standard module to suit M8080H?

The part number for standard module to suit M8080H is 80ML
3 can fit into 1 plate.

PM8000 series front display simulator

Issue
Functionality of the PM8000 series meter may need to be implemented when instructing a customer through a setup procedure using a PM8000 series meter.

Product Line
PM8xxx

Environment
PM8xxx front display

Cause
Physical meter might be unavailable

Resolution
Please find in the attached .zip file OfflineMeter executables for the PM8000. Offline Meters, or meter simulators, are used on your Windows PC to emulate the meter hardware platform for the development and testing of meter application logic (a.k.a ION frameworks) using either ION Setup software or ION Enterprise Designer. Once the meter simulator is running, it can be accessed at the domain name "localhost" (127.0.0.1) with software on the same computer.
PM8000 display simulator
 
Show More