Product or component type
contactor
Contactor application
motor controlresistive load
Pole contact composition
3 NO
[Ue] rated operational voltage
power circuit: <= 690 V AC 25...400 Hzpower circuit: <= 300 V DC
[Ie] rated operational current
60 A (at <60 °C) at <= 440 V AC AC-1 for power circuit40 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
Motor power kW
18.5 kW at 380...400 V AC 50/60 Hz (AC-3)11 kW at 220...230 V AC 50/60 Hz (AC-3)22 kW at 415...440 V AC 50/60 Hz (AC-3)22 kW at 500 V AC 50/60 Hz (AC-3)30 kW at 660...690 V AC 50/60 Hz (AC-3)9 kW at 400 V AC 50/60 Hz (AC-4)
Motor power hp
5 hp at 230/240 V AC 50/60 Hz for 1 phase motors10 hp at 230/240 V AC 50/60 Hz for 3 phases motors30 hp at 575/600 V AC 50/60 Hz for 3 phases motors10 hp at 200/208 V AC 50/60 Hz for 3 phases motors3 hp at 115 V AC 50/60 Hz for 1 phase motors30 hp at 460/480 V AC 50/60 Hz for 3 phases motors
Control circuit type
DC standard
[Uc] control circuit voltage
48 V DC
Auxiliary contact composition
1 NO + 1 NC
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947
[Ith] conventional free air thermal current
10 A (at 60 °C) for signalling circuit60 A (at 60 °C) for power circuit
Irms rated making capacity
140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1800 A at 440 V for power circuit conforming to IEC 60947
Rated breaking capacity
800 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current
320 A 40 °C - 10 s for power circuit720 A 40 °C - 1 s for power circuit72 A 40 °C - 10 min for power circuit165 A 40 °C - 1 min for power circuit100 A - 1 s for signalling circuit120 A - 500 ms for signalling circuit140 A - 100 ms for signalling circuit
Associated fuse rating
10 A gG for signalling circuit conforming to IEC 60947-5-180 A gG at <= 690 V coordination type 1 for power circuit80 A gG at <= 690 V coordination type 2 for power circuit
Average impedance
1.5 mOhm - Ith 60 A 50 Hz for power circuit
[Ui] rated insulation voltage
power circuit: 600 V CSA certifiedpower circuit: 600 V UL certifiedsignalling circuit: 690 V conforming to IEC 60947-1signalling circuit: 600 V CSA certifiedsignalling circuit: 600 V UL certifiedpower circuit: 690 V conforming to IEC 60947-4-1
Electrical durability
0.7 Mcycles 60 A AC-1 at Ue <= 440 V1.5 Mcycles 40 A AC-3 at Ue <= 440 V
Power dissipation per pole
Standards
CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
Connections - terminals
control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable endcontrol circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible without cable endcontrol circuit: screw clamp terminals 2 cable(s) 1-4 mm²flexible without cable endcontrol circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible with cable endcontrol circuit: screw clamp terminals 1 cable(s) 1-4 mm²solid without cable endcontrol circuit: screw clamp terminals 2 cable(s) 1-4 mm²solid without cable endpower circuit: screw connection 1 cable(s) 1-35 mm²flexible without cable endpower circuit: screw connection 2 cable(s) 1-25 mm²flexible without cable endpower circuit: screw connection 1 cable(s) 1-35 mm²flexible with cable endpower circuit: screw connection 2 cable(s) 1-25 mm²flexible with cable endpower circuit: screw connection 1 cable(s) 1-35 mm²solid without cable endpower circuit: screw connection 2 cable(s) 1-25 mm²solid without cable end
Tightening torque
control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmcontrol circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2power circuit: 8 N.m - on EverLink BTR screw connectors - cable 25-35 mm² hexagonal screw head 4 mmpower circuit: 5 N.m - on EverLink BTR screw connectors - cable 1-25 mm² hexagonal screw head 4 mm
Operating time
42.5...57.5 ms closing16...24 ms opening
Safety reliability level
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability
10 Mcycles
Maximum operating rate
3600 cyc/h 60 °C
Coil technology
built-in bidirectional peak limiting diode suppressor
Control circuit voltage limits
drop-out: 0.1...0.3 Uc DC (at 60 °C)operational: 0.75...1.25 Uc DC (at 60 °C)
Inrush power in W
19-19 W (at 20 °C)
Hold-in power consumption in W
7.4-7.4 W at 20 °C
Auxiliary contacts type
type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1
Signalling circuit frequency
25...400 Hz
Minimum switching current
5 mA for signalling circuit
Minimum switching voltage
17 V for signalling circuit
Non-overlap time
1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contact
Insulation resistance
> 10 MOhm for signalling circuit
Power range
7-11 kW at 200-240 V 3 phases15-25 kW at 380-440 V 3 phases15-25 kW at 480-500 V 3 phases
Motor starter type
direct on-line contactor
Contactor coil voltage
48 V DC standard
IP degree of protection
IP20 front face conforming to IEC 60529
Protective treatment
TH conforming to IEC 60068-2-30
Ambient air temperature for operation
-5-60 °C
Ambient air temperature for storage
-60-80 °C
Permissible ambient air temperature around the device
-40-70 °C at Uc
Operating altitude
3000 m without
Fire resistance
850 °C conforming to IEC 60695-2-1
Flame retardance
V1 conforming to UL 94
Mechanical robustness
vibrations contactor open: 2 Gn, 5...300 Hzvibrations contactor closed: 4 Gn, 5...300 Hzshocks contactor closed: 15 Gn for 11 msshocks contactor open: 10 Gn for 11 ms
Sustainable offer status
Green Premium product
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Environmental Disclosure
ENVPEP1503009EN
Circularity Profile
ENVEOLI1503009EN
CALIFORNIA PROPOSITION 65
WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov