Frequently Asked Questions
Powerpact L, I-line version
The I-line version of the Powerpact L Circuit Breaker requires 6 inches of bus. This is sometimes referred to as the "mounting inch requirement".
The PDL600RM is rated 16A resistive (6A inductive) and has a NO & NC contact. It is a 600 series module so can be mounted in a grid plate, but doesn't have to be as there is no built in indication as to the state of the contacts.
What is the difference between the LUA contact blocks and the LUF contact blocks on a TeSysU motor starter?
TeSysU Simple Motor Starters
The LUA contact blocks are for signalling and will change state depending on mode or fault condition(s). These consist of one "Ready Condition" contact that operates with the handle and one "Fault Condition" contact that operates only when a fault is seen. The LUF contact blocks are standard contact blocks and will change state with the poles.
Unfortunately not, we do not have a replacement for 4RCBE116/30Q Quicklag 16A RCBO.
Yes, it is rated up to 16A
It means 20A incandesent, 16A fluro
The Schneider Electric reference number of BRS368H130AAA is now used to order the exact replacement motor for Berger Lahr type VRDM368/50 LHA with ID number 52024045000.
Yes, the exact replacement for VRDM397/50 LNA OOIP41 with ID number 52025015000 can be ordered using the new Schneider Electric ordering number of BRS397NS0010
It means the relay module can switch a load of up to 16A resistive or a 6A fluorescent load.