MASTER YOUR CASTLE with your new build or reno project
Enter competition
c-bus shutter relay unit

L5501RBCP

C-Bus Din Rail Mounted, Shutter Relay, 1 Channel, Without C-Bus Power Supply

c-bus shutter relay unit
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
  • DIN rail mounted, 2M wide
  • AC input impedance 80 kOhm at 1 kHz
  • Electrical isolation 3.75 kV RMS from C-Bus to mains
  • Maximum units per network 80
  • Load current rating 2 A (motor load)
  • Load voltage rating 24 V DC, 24 - 240 V AC
  • Warm up time 5 s
  • Network clock software selectable
  • Network burden software selectable
  • Class II switch
  • 4 kV rated impulse withstand voltage
  • 0 - 45 deg C operating temperature
  • 10 - 95% RH operating humidity
  • Mains terminals Accommodates 2 x 1.5 mmsq or 1 x 2.5 mmsq (2 x 15 AWG or 1 x 13 AWG)
Range of product
C-Bus
Range
C-Bus
Product brand
Clipsal
Product or component type
relay
Device application
control
[Us] rated supply voltage
15...36 V DC
Network type
AC/DC
Number of outputs
1 roller blind
Local signalling
LED
Width
36 mm
Height
93 mm
Depth
63 mm
IP degree of protection
IP20
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Product Environmental

  • End of Life Manual

  • Operating Manuals

  • System User Guide

  • Specifications

  • Application Solutions

  • Certificates (MSDS)

  • Corporate Marketing

  • Software - Released

Frequently Asked Questions

hide show

What is the CBUS shutter relay

 Part code is L5501RBCP

What is the code for a CBus curtain module

 It is L5501RBCP

What is the part code for the C-Bus Single Channel Shutter Relay for Blinds/curtains?

The part number is L5501RBCP

What is the part number of the wall mounting enclosure to suit L5501RBCP 1 channel C-Bus Blind/Curtain/Shutter relay?

5501RE is the part number of the wall mounting enclosure to suit  L5501RBCP 1 channel C-Bus Blind/Curtain/Shutter relay.
For further information, please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=5501RE
User-added image
 

What are the power limitations on a shutter relay L5501RBCP?

The power limitations to the shutter relay L5501RBCP are a maximum load output of 24V DC, 24-240V AC and a maximum motor load of 2A.

Some of the key features for the L5501RBCP are:
  • DIN rail mounted, 2M wide
  • AC input impedance 80 kOhm at 1 kHz
  • Electrical isolation 3.75 kV RMS from C-Bus to mains
  • Maximum units per network 80
  • Load current rating 2 A (motor load)
  • Load voltage rating 24 V DC, 24 - 240 V AC
  • Warm up time 5 s
  • Network clock software selectable
  • Network burden software selectable
  • Class II switch
  • 4 kV rated impulse withstand voltage
  • 0 - 45 deg C operating temperature
  • 10 - 95% RH operating humidity
  • Mains terminals Accommodates 2 x 1.5 mmsq or 1 x 2.5 mmsq (2 x 15 AWG or 1 x 13 AWG)
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=L5501RBCP
 

 

What are the individual preset levels or percentages for Blind Shutter Relays?

Depending on the scenario they are being used in, you can have three options based on 1, 2 or 3 button control

1 Button Control:
98% - Shutter Toggle Open/Close

2 Button Control:
1% - Close Toggle/Stop
99% - Open Toggle/Stop

3 Button Control:
0% - Close
100% - Open
2% - Stop

If you find that the opposite of what is expected to happen is happening, please confirm the polarity of the wiring

C-BUS - Can I open/close all shutters but still have individual control?

Yes you can, if you have for example 5 shutter relays all with separate group address for individual control and would like a master switch to open or close all then try the following:

On a device supporting scenes, create a close scene with all of those shutter relay groups set to 0%, under the Trigger Control tab create a Trigger Group with the action selector set to 0.
Now duplicate that scene and set the groups to 100%, under the Trigger Control select the same Trigger Group but now set the Action selector to 255.

On a key input (switch) change to the secondary application and select the Trigger Group with function on/off.

When pressed this will send the 255 to trigger one scene and when pressed off will send the 0 level to trigger the alternate scene.