Specifications

hide show
Range of product
VARIO
Accessory / separate part designation
legend holder with blank legend plate
Accessory / separate part type
legend holder
Accessory / separate part category
marking accessories
Accessory / separate part destination
front plate 90 x 90 mm
Quantity per set
set of 5
Net weight
0.07 kg
Sustainable offer status
Green Premium product
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Compliant
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
X
Environmental Disclosure
ENVPEP110227EN
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
California proposition 65
WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide which is known to the State of California to cause Carcinogen harm. For more information go to www.p65warnings.ca.gov
Warranty
18 months

Frequently Asked Questions

hide show

What type of fuse do DF103 fuseholders accept?

Issue:
DF103 fuse type

Product Line:
TeSys DF

Environment:
Fuse carriers

Resolution:
The fuseholders accept M cartridge fuses.
The fuse size is10mm x 38mm (0.4 x 1.5 inches). They are rated the same as CC fuses.

What position does the SW103 switch need to be in to activate the termination resistor for bacnet on the ATV212 drives?

Issue:
What position does the SW103 switch need to be in to activate the termination resistor for bacnet on the ATV212 drives?

Product Line:
ATV212

Environment:
All 

Cause:
Position of the dip switch to active the terminator resistor. 

Resolution:
To active the terminator resistor put the switch position to the left.  See the dot on top of the switch in the example file this is ON. 

Where can I find information on the sw100, sw101, sw102 and sw103 dip switches on the ATV212 drives?

Issue:
Where can I find information on the sw100, sw101, sw102 and sw103 dip switches on the ATV212 drives?

Product Line:
Altivar ATV212

Environment:
Altivar 212 drive

Cause:
Needs to know where they can find information on the dip switch settings.

Resolution:
There are 5 dip switches on the ATV212 drives
SW101= FM analog output U= voltage output I = current output
SW102= Sink Source switch
SW103= Term Switch. Selection of communication terminal resistor. When SW103 is set to Term, internal 120 Ohm termination resistor is connected between A and B terminals.
SW100= VIA= VIA analog input switch (U= voltage input or I= current input)
    VIB= VIB analog input switch (0-10-vdc input or PTC input)

  

    

 

Whick key is supplied with 56 series, common keyed switches?

On the 56 Series key switches the common key that is provided is a "103 key".
Some of the key Features of the 56 Series key switches are:
  • For locking in the on or off position
  • Dust-resistant, hoseproof and UV resistant
  • Safety in operation
  • M200 rating
  • Standard security KSW

For further information on the 56 Series key switches please visit https://www.clipsal.com/Trade/search-results?q=56%20series%20key%20switch
 

Do you do the 56K1SW220 with a common key?

Yes, place CK on the end of the part number and the switch will be provided with a 60103 Low and Fletcher Key.

Some of the key features are:

  • Standard security KSW
  • 107 mm Height x 101 mm Width x 112 mm Depth
  • M250 rating
  • 25 - 10 AWG conductor terminal
  • Less enclosure
  • For Locking In Only The Off Position
  • Dust-resistant, hoseproof and UV resistant
  • Safety in operation
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=56K1SW220

 

AP5610, AP5615, and AP5616 KVM Switch LDAP Implementation Example


Issue

I need help setting up LDAP with my AP5610, AP5615, and AP5616 KVM Switch.


Product Line


  • KVM Switches
    • AP5610
    • AP5615
    • AP5616
Environment

  • All firmware versions
  • LDAP or LDAPS configured in your environment

Cause

This article is provided as an example LDAP set up.


Resolution

Refer to the PDF attachment in this knowledge base.

How do you set the line termination resistor on the ATV212 drive set up for Bacnet protocol?

Issue:
How do you set the line termination resistor on the ATV212 drive set up for Bacnet protocol?

Product Line:
Altivar ATV212

Environment:
All

Cause:
Needs to terminate his Bacnet line and wants to know how to set the drive up.

Resolution:
Switch SW103 is the line termination resistance switch to put 120 ohms across the data pins A and B.
 

What are the sizes of the conduit openings on the 9001KY enclosures?

Issue:
9001KY Enclosure conduit size 

Product Line: 
9001 KY and SKY Control stations

Environment:
n/a

Resolution:
9001KY1 thru 9001KY6 is 3/4 inch.
9001KY9 is 1 inch.
9001KY12 is 1 1/4 inch.
9001KY16 is 1 1/2 inch.

What is the breakdown of components for 9001KYK117?

Issue:
Breakdown of components for 9001KYK117  

Product Line:
Harmony Push Buttons

Environment:
Harmony Control Stations

Cause:
Product Features

Resolution:
9001KYK117 components are:
1-9001KY1S1 (red enclosure)
1-9001K15 (break glass operator)
1-9001KA1 (1 open and 1 closed contact)
1-9001KN799RP (legend plate)

Replacement glass discs are 9001K57 (package of five)