tag earth term 30 ser plate

Standard Series Tag Earth Term 30 Ser Plate

Catalogue Number: ET30
tag earth term 30 ser plate
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range of product
Standard Series
Product brand
Clipsal
Product or component type
earth terminal
Length
6 mm
EU RoHS Directive
Compliant

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Installation Instruction

  • Product Environmental

  • Specifications

  • Case Studies

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What size wrench is needed to remove the NetShelter pallet bracket?

Issue:
Customer may ask what size the pallet bracket bolts are.

Product Line:
NetShelter SX, NetShelter SV, NetShelter VX

Environment:
All versions and serial ranges.

Cause:
Customer wants to make sure they have the proper tools on hand.

Resolution:
NetShelter SX, SV and VX pallet brackets require a 13 mm wrench.
The NetShelter SV also requires a T30 Torx wrench (included). If the bolts are too tight for the included T30 Torx tool please use a T30 Torx socket and socket wrench.

Most common PMM meter Modbus registers

Issue:
Most common PMM meter Modbus registers


Product line:
MGE PMM/PMN (300 kVA and under)


Environment:
MGE PMM/PMN


Cause:
Most common PMM meter Modbus registers



Resolution:
The PMM comes with many communication options but the most common are below:
 
The Modbus registers can be found on the Veris website:

https://www.veris.com/modbus_downloads.aspx
 
MCM:  See H82xx - Multi-Circuit Meters
BCM (legacy):  See H663 / H704 - 50A Branch Circuit Monitors
BCPM (current):  E30 / E31xxx - Panelboard Monitoring System




 
 

Is there a quick fix for stuck screws on the vertical mounting rails of a NetShelter cabinet?

Issue:
The screws on the vertical mounting rail will not loosen.

Product Line: 
NetShelter Cabinets

Environment:
All versions and serial ranges

Cause:
Over-torqued rail screws.

Resolution:

Solutions for Stuck Screws:
There are two ways that you can loosen stuck rail screws using tools that you may have on hand:
  1. The first way requires a T30 Torx socket and a socket wrench. Using this combination provides much greater torque onto the screw head and should loosen it easily.
  2. The second way requires a T30 Torx bit and an electric drill. In this method you tighten the bit into the drill and use the drill as a wrench. Do not turn the drill on. Loosen the bolt by hand turning the drill as you would a wrench.

If you don’t have these tools on hand please contact *Schneider Electric Tech Support to RMA p/n 0M-5383. This is a T-handle combination Torx tool. It provides more torque than the included L-shaped tool, but not as much as the methods outlined above. The 0M-5383 can be used as a Torx screwdriver or T-handle wrench. To loosen stuck screws you should use the tool as a T-handle wrench.

If you need to replace any damaged screws please contact *Schneider Electric Tech Support to RMA p/n 803-8008A.

Note: you will need the model number and serial number of the cabinet in order to process an RMA. These can be found inside the rear doors on the upper frame.
Please have this information ready when you contact your local *Schneider Electric Tech Support.

*Contact information can be found in the Owner's Manual or online at www.apc.com under Support.

What is the part number for a replacement 9001 KS selector switch E key?

Issue:
What is the part number for a replacement 9001 KS selector switch E key?

Product Line:
Harmony Pushbuttons

Environment:
All Products

Cause:
Product selection

Resolution:
All standard replacement keys follow the same numbering system, 29411-01XX0 where the XX is replaced by the E key number. For an E11 key replace the XX with 11 for 29411-01110. For an E12 key replace the XX with 12 for 29411-01120.
For the master keyed range, E36 through E60, use the same system with the base part number 29411-51XX0. So an E36 key is a 29411-51360. Master key, E99, is part number 29411-51990.