Dolly Rocker BLANK  AG
Dolly Rocker BLANK  AW
Dolly Rocker BLANK  AG
Dolly Rocker BLANK  AW

Clipsal Iconic Essence Rocker, Blank

Catalogue Number: E40AR
Dolly Rocker BLANK  AG
Dolly Rocker BLANK  AW
Dolly Rocker BLANK  AG
Dolly Rocker BLANK  AW
Retail
$3.18*
RRP (Inc. GST)
Colour Ash Grey (AG)
  • Ash Grey 1 PCE
  • Arctic White 1 PCE

Specifications

hide show
Range
Clipsal Iconic
Aesthetic name
Iconic Essence
Product or component type
rocker
Colour tint
ash grey (AG)
Type of packing
polybag
Quantity per set
set of 1
Sale per indivisible quantity
1
Product destination
switch
Fixing mode
clip-in
Surface finish
matt
Height
23 mm
Width
23 mm
Depth
2 mm
Net weight
0.01 kg
Ambient air temperature for operation
0-45 °C
Relative humidity
10-95 %

Frequently Asked Questions

hide show

What is the alternative for the 250ml clear glue 240A?

There is no direct alternative to the clear 250ml jointing cement in the squeeze bottle.

We only offer our range of four sizes with a brush incorporated in the lid.    

For further information please visit https://www.clipsal.com/Trade/search-results?q=jointing%20cement.

"Couldn't determine unit type based on ModelNum" when using EM4800 configuration tool

Issue
When connection to EM4xxx meters using the EM4800 configuration tool, an error message pops up:
"Couldn't determine unit type based on ModelNum xxxxxxxx-xx-xx"


Product Line
EM4xxx series meters

Environment
Meter configuration 

Resolution
Un-install the current version of EM4800 Configuration Tool that you have installed and re-install the latest version of the tool.
Latest version of the tool from the following link:
​This config tool supports the new Demand feature released with meter firmware revision 1.46
* IMPORTANT NOTICE: This version is NOT measurement Canada Approved.
 

How to configure the SRC 5,6,8 & 10 KVA UPS Models External Battery Packs using the LCD display

Issue:

Configuration of SRC battery packs via the LCD display  

Product Line:

Smart-UPS Online

Environment:

All SRC models, All Serial Numbers

Cause:

Batteries need to  be manually added to the UPS in order for the unit to properly calculate runtime

Resolution:
 

Procedure for Configuring the number of battery strings through the display interface or LCD menus:


1. Press the Enter key to select the main menu.

2. Scroll down to configuration.

3. Press the enter key to select configuration. 

4. Scroll down to battery setup by number of battery pack. 

5. Enter the correct number of attached battery packs.


In order to setup the external battery packs, please key in as (Ah of battery) x (total number of batteries).

Example 1:   If there are 16pcs of 5Ah battery in series (for 5kVA), the total Ah number is 5Ahx16pcs=80Ah.
Example 2:   If there are 16 pcs of 100 AH batteries in series(for 5 KVA), the total AH number is 100 AH x 16 pcs=1600 AH
Example 3:   If there are 2 strings of 16pcs of 5Ah battery in series (for 5kVA), the total Ah number is 5Ahx16pcsx2 strings=160Ah.
  
The 80Ah inside the table is the default setting for 5kVA/6kVA (1 EXB: 16pcs of 5Ah battery)
The default setting for 8kVA is 140Ah (1 EXB: 20pcs of 7Ah battery)
The default setting for 10kVA is 180Ah (1 EXB: 20pcs of 9Ah battery).
  
If “Ext total battery Ah” is set as 0, it means there is no external battery connected. 
 
        

"