Quantcast

Clipsal Wiser Motion Smart Sensor 3 V DC, IP20

Clipsal Wiser Motion Smart Sensor 3 V DC, IP20

Clipsal Wiser Motion Smart Sensor 3 V DC, IP20

Item Number: CLP595011

Retail
$175
RRP (Inc. GST)

The Wiser Motion Smart Sensor detects movement, measures luminance in a room, and reports the status to the Wiser Hub. The threshold of luminance settings and/or detection of movement can be programmed to determine what action to be taken at that moment.

Datasheet

Wiser Technical Catalogue

Download (PDF 2.2MB)

Specifications

Design

Colour tint

white

Sustainable offer status

Green Premium product

Product brand

Clipsal

Range

Wiser

Product or component type

sensor

Device application

monitoring

Physical

[Ue] rated operational voltage

3 V

Supply

battery 2 x 1.5 V / LR03 AAA

Communication port protocol

Zigbee at 2.4 GHz conforming to IEEE 802.15.4

Movement detection area

  • 5 m of radius (wall) at 90...110° (1.2 m mounting)
  • 2 m of radius (ceiling) at 360° (2.5 m mounting)
    • Width

      26.6 mm

      Standards

    • IEC 60669-2-5
    • EN 60669-2-5
      • Product certifications

      • CE
      • Zigbee 3.0
        • IP degree of protection

          IP20

          Relative humidity

          10-95 %

          Ambient air temperature for operation

          -10-50 °C

          REACh Regulation

          Free of Substances of Very High Concern above the threshold

          REACh free of SVHC

          Yes

          EU RoHS Directive

          Compliant

          Mercury free

          Yes

          RoHS exemption information

          Yes

          China RoHS Regulation

          X

          Environmental Disclosure

          ENVPEP1804009EN

          Circularity Profile

          ENVEOLI1804009EN

          Range compatibility

        • Wiser
        • Wiser hub
          • Others

            Battery life

            5 year(s)

            Diameter

            70.8 mm

            Operating altitude

            <= 2000 m

            Unit Type of Package 1

            PCE

            Number of Units in Package 1

            1

            Package 1 Weight

            109 g

            Package 1 Height

            7.5 cm

            Package 1 width

            5.2 cm

            Package 1 Length

            7.5 cm

            Unit Type of Package 2

            S02

            Number of Units in Package 2

            40

            Package 2 Weight

            4.675 kg

            Package 2 Height

            15 cm

            Package 2 width

            30 cm

            Package 2 Length

            40 cm

            Unit Type of Package 3

            P06

            Number of Units in Package 3

            640

            Package 3 Weight

            83.3 kg

            Package 3 Height

            75 cm

            Package 3 width

            60 cm

            Package 3 Length

            80 cm

            Product name

            Wiser motion sensor
            Show all specifications

            Documents & downloads

            hide show

            Frequently Asked Questions

            hide show

            Wiser motion sensor – What is detection delay and how do I program it?

            Detection delay can be set to 15, 30, 45 and 60 seconds as a preset option or you can set a custom time value between 1 second and 59 minute 59 seconds.

            Be aware that changing the detection delay value can change the battery life of the product.
            To explain how this works we will use 5 minutes detection delay as an example. When motion is detected the sensor sends the signal ‘occupied’ to the hub. If no more motion is detected within the 5 minutes the sensor will send the signal ‘unoccupied’. If there was motion detected during the 5 minutes the 5 minutes will restart again. This will continue restarting until no motion is detected.

            To configure the Wiser Motion sensor to control another Wiser product you will need to go into your Automations and create two Automations. One Automation as an ‘on’ and another as an ‘off’.

            The ‘on’ Automation can be created by first selecting to add a new Automation. Once open name the Automation accordingly. Add a condition ‘when device status changes’, select the motion sensor, select motion state and occupied. Then add an action of what you want to occur when the motion sensor detects motion. As an example, if you wanted to turn on a device you would add task of ‘run the device’. This will then bring up the list of devices you have to choose from to operate and once you select a device you can then select to turn it on or off.

            The ‘off’ Automation is the same as the ‘on’ Automation but select the motion sensor state of ‘unoccupied’ as the condition.
            Motion Sensor - Auto.pngMotion Sensor - Auto1.pngMotion Sensor settings.png

            Wiser Product Warranty

            The Hub, IR converter and all Sensors have a warranty of 12 months.
            The 2AX (41E2PBSWM), 10AX (41E10PBSWM), Dimmer (41EPBDWCLM), Micro module dimmer (CLP5010WDZ), Micro module switch (CLP5011WSZ), Micro module blinds (CLP5015WBZ) and the Connected Socket Outlet (3025CSG) all have a 2-year warranty.
            This information can be found on the product installation instructions.
             

            How do I setup a schedule (for switches, sensor, socket)?

            Find the device in the app and tap on it, when in the specific device screen tap on Schedule. In the Schedule screen tap Add and then create a schedule for the device. For Socket outlets there will be an option in the Schedule screen to select which socket you want to create the schedule for.

            When a device is in Zigbee mode, schedules can only be created for an ‘On’ or ‘Off’.  Hence two schedules will be needed for an ON/OFF - one for the ON time and one for the OFF time.

            In Bluetooth (BLE) mode you can select a time range and both an ‘On’ or ‘Off’ within a single schedule.

            Related to products: CLP595011

            Wiser motion sensor and app

            Features

            • Detects movement, measures luminance in a room, and reports the status to the Wiser Hub
            • Controls Wiser devices to configure the room for a desired effect
            • Threshold of luminance settings and/or detection of movement can be programmed to determine what and when action to be taken
            • Surface-mounting, with screws or adhesive pads, on a ceiling or a wall
            • Up to 360 degree detection
            • IP20
            • Battery powered
            Wiser products in kitchen

            Range

            A Clipsal Wiser Smart Home enables you to personalise your home to fit your needs and manage it with one simple app. It’s a simple solution that can be easily integrated into any home, old or new.

            All Wiser Smart Home products are also compatible with most of Clipsal’s existing wiring devices, including the Iconic switch range, making design and function upgrades simple and seamless.

            With Google Home or Amazon Echo, you can also control your Clipsal Wiser Smart Home with voice commands.

            With a Clipsal Wiser Smart Home, you can take control of your home the way that it suits you.