Altivar 71 Variable Speed Drive, 55kW-75HP, 480V, EMC Filter-Graphic Terminal

Altivar 71 Variable Speed Drive, 55kW-75HP, 480V, EMC Filter-Graphic Terminal

Altivar 71 Variable Speed Drive, 55kW-75HP, 480V, EMC Filter-Graphic Terminal

Item Number: ATV71HD55N4

Retail
$24,474.79
RRP (Inc. GST)

Product Dimensions

Width icon

Width320 mm

Height icon

Height630 mm

Depth icon

Depth290 mm

See full specifications

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Altivar 71

Product or component type

variable speed drive

Product destination

  • asynchronous motors
  • synchronous motors
    • Sustainable offer status

      Green Premium product

      Warranty

      18 months

      Physical

      Local signalling

      1 LED (red)drive voltage:

      Type of cable

    • with a NEMA Type1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
    • with an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC
    • without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
    • without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
      • Supply

      • internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
      • internal supply: 24 V DC (21-27 V), <200 mA, protection type: overload and short-circuit protection
        • Protection type

        • against exceeding limit speed: drive
        • short-circuit between motor phases: drive
        • thermal protection: drive
        • motor phase break: motor
        • power removal: motor
        • thermal protection: motor
        • against input phase loss: drive
        • break on the control circuit: drive
        • input phase breaks: drive
        • line supply overvoltage: drive
        • line supply undervoltage: drive
        • overcurrent between output phases and earth: drive
        • overheating protection: drive
        • overvoltages on the DC bus: drive
          • Insulation resistance

            > 1 mOhm 500 V DC for 1 minute to earth

            Communication port protocol

          • CANopen
          • Modbus
            • Connector type

            • 1 RJ45 (on front face) for Modbus
            • 1 RJ45 (on terminal) for Modbus
            • male SUB-D 9 on RJ45 for CANopen
              • Marking

                CE

                Height

                630 mm

                Depth

                290 mm

                Width

                320 mm

                Net weight

                44 kg

                Standards

              • EN 61800-3 environments 1 category C3
              • EN/IEC 61800-3
              • EN 55011 class A group 2
              • UL Type 1
              • IEC 60721-3-3 class 3S2
              • EN 61800-3 environments 2 category C3
              • EN/IEC 61800-5-1
              • IEC 60721-3-3 class 3C1
                • Product certifications

                • UL
                • NOM 117
                • GOST
                • CSA
                • C-Tick
                  • IP degree of protection

                    IP20

                    Relative humidity

                  • 5-95 % without condensation conforming to IEC 60068-2-3
                  • 5-95 % without dripping water conforming to IEC 60068-2-3
                    • Ambient air temperature for operation

                      -10-50 °C (without derating)

                      Ambient air temperature for storage

                      -25-70 °C

                      EU RoHS Directive

                      Pro-active compliance (Product out of EU RoHS legal scope)

                      Mercury free

                      Yes

                      RoHS exemption information

                      Yes

                      China RoHS Regulation

                      X

                      Environmental Disclosure

                      ENVPEP070403EN

                      Circularity Profile

                      ENVEOLI100208EN

                      California proposition 65

                      WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov

                      Others

                      Product specific application

                      complex, high-power machines

                      Component name

                      ATV71

                      Motor power kW

                      55 kW, 3 phases at 380...480 V

                      Motor power hp

                      75 hp, 3 phases at 380...480 V

                      Maximum motor cable length

                    • 100 m shielded cable
                    • 200 m unshielded cable
                      • [Us] rated supply voltage

                        380...480 V - 15...10 %

                        Network number of phases

                        3 phases

                        Line current

                      • 101 A for 480 V 3 phases 55 kW / 75 hp
                      • 120 A for 380 V 3 phases 55 kW / 75 hp
                        • EMC filter

                          integrated

                          Assembly style

                          with heat sink

                          Apparent power

                          79 kVA at 380 V 3 phases 55 kW / 75 hp

                          Prospective line Isc

                          22 kA for 3 phases

                          Nominal output current

                        • 116 A at 2.5 kHz 380 V 3 phases 55 kW / 75 hp
                        • 96 A at 2.5 kHz 460 V 3 phases 55 kW / 75 hp
                          • Maximum transient current

                          • 174 A for 60 s 3 phases 55 kW / 75 hp
                          • 191 A for 2 s 3 phases 55 kW / 75 hp
                            • Output frequency

                              0.1-500 Hz

                              Nominal switching frequency

                              2.5 kHz

                              Switching frequency

                            • 1...16 kHz adjustable
                            • 2.5...16 kHz with derating factor
                              • Asynchronous motor control profile

                              • sensorless flux vector control (SFVC) (voltage or current vector)
                              • voltage/frequency ratio (2 or 5 points)
                              • flux vector control (FVC) with sensor (current vector)
                              • ENA (Energy adaptation) system for unbalanced loads
                                • Type of polarization

                                  no impedance for Modbus

                                  Supply voltage limits

                                  323-528 V

                                  Supply frequency

                                  50...60 Hz - 5...5 %

                                  Network frequency

                                  47.5...63 Hz

                                  Speed range

                                • 1-100 for asynchronous motor in open-loop mode, without speed feedback
                                • 1-1000 for asynchronous motor in closed-loop mode with encoder feedback
                                • 1-50 for synchronous motor in open-loop mode, without speed feedback
                                  • Speed accuracy

                                  • +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn
                                  • +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
                                    • Torque accuracy

                                    • +/- 15 % in open-loop mode, without speed feedback
                                    • +/- 5 % in closed-loop mode with encoder feedback
                                      • Transient overtorque

                                      • 170-170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes
                                      • 220-220 % of nominal motor torque +/- 10 % for 2 s
                                        • Braking torque

                                        • <= 150 % with braking or hoist resistor
                                        • 30 % without braking resistor
                                          • Synchronous motor control profile

                                            vector control without speed feedback

                                            Regulation loop

                                            adjustable PI regulator

                                            Motor slip compensation

                                          • suppressable
                                          • adjustable
                                          • automatic whatever the load
                                          • not available in voltage/frequency ratio (2 or 5 points)
                                            • Output voltage

                                              <= power supply voltage

                                              Insulation

                                              electrical between power and control

                                              Electrical connection

                                            • terminal, clamping capacity: 2.5 mm², AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
                                            • terminal, clamping capacity: 150 mm² (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
                                              • Tightening torque

                                              • 0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
                                              • 41 N.m, 360 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
                                                • Analogue input number

                                                  2

                                                  Analogue input type

                                                • AI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign
                                                • AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits
                                                • AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits
                                                  • Sampling duration

                                                  • 2 ms +/- 0.5 ms (AI1-/Al1+) - analog input(s)
                                                  • 2 ms +/- 0.5 ms (Al2) - analog input(s)
                                                  • 2 ms +/- 0.5 ms (LI1...LI5) - discrete input(s)
                                                  • 2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input(s)
                                                    • Response time

                                                    • <= 100 ms in STO (Safe Torque Off)
                                                    • AO1 2 ms, tolerance +/- 0.5 ms for analog output(s)
                                                    • R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s)
                                                    • R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s)
                                                      • Accuracy

                                                      • +/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C
                                                      • +/- 0.6 % (AI2) for a temperature variation 60 °C
                                                      • +/- 1 % (AO1) for a temperature variation 60 °C
                                                        • Linearity error

                                                        • +/- 0.15 % of maximum value (AI1-/Al1+, AI2)
                                                        • +/- 0.2 % (AO1)
                                                          • Analogue output number

                                                            1

                                                            Analogue output type

                                                          • AO1 software-configurable logic output 10 V 20-20 mA
                                                          • AO1 software-configurable current 0...20 mA, impedance: 500 Ohm, resolution 10 bits
                                                          • AO1 software-configurable voltage 0...10 V DC, impedance: 470 Ohm, resolution 10 bits
                                                            • Discrete output number

                                                              2

                                                              Discrete output type

                                                            • configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
                                                            • configurable relay logic: (R2A, R2B) NO - 100000 cycles
                                                              • Minimum switching current

                                                                3 mA at 24 V DC for configurable relay logic

                                                                Maximum switching current

                                                              • R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
                                                              • R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
                                                              • R1, R2: 5 A at 250 V AC resistive load, cos phi = 1
                                                              • R1, R2: 5 A at 30 V DC resistive load, cos phi = 1
                                                                • Discrete input number

                                                                  7

                                                                  Discrete input type

                                                                • LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm
                                                                • LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
                                                                • LI6: switch-configurable PTC probe 0-6 , impedance: 1500 Ohm
                                                                • PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d
                                                                  • Discrete input logic

                                                                  • negative logic (sink) (LI1...LI5), > 16 V (state 0), < 10 V (state 1)
                                                                  • positive logic (source) (LI1...LI5), < 5 V (state 0), > 11 V (state 1)
                                                                  • negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1)
                                                                  • positive logic (source) (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1)
                                                                    • Acceleration and deceleration ramps

                                                                    • automatic adaptation of ramp if braking capacity exceeded, by using resistor
                                                                    • S, U or customized
                                                                    • linear adjustable separately from 0.01 to 9000 s
                                                                      • Braking to standstill

                                                                        by DC injection

                                                                        Frequency resolution

                                                                      • analog input: 0.024/50 Hz
                                                                      • display unit: 0.1 Hz
                                                                        • Physical interface

                                                                          2-wire RS 485 for Modbus

                                                                          Transmission frame

                                                                          RTU for Modbus

                                                                          Transmission rate

                                                                        • 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
                                                                        • 9600 bps, 19200 bps for Modbus on front face
                                                                        • 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
                                                                          • Data format

                                                                          • 8 bits, 1 stop, even parity for Modbus on front face
                                                                          • 8 bits, odd even or no configurable parity for Modbus on terminal
                                                                            • Number of addresses

                                                                            • 1-127 for CANopen
                                                                            • 1-247 for Modbus
                                                                              • Method of access

                                                                                slave CANopen

                                                                                Operating position

                                                                                vertical +/- 10 degree

                                                                                Functionality

                                                                                full

                                                                                Specific application

                                                                                other applications

                                                                                Option card

                                                                              • communication card for CC-Link
                                                                              • communication card for Modbus TCP
                                                                              • communication card for Modbus/Uni-Telway
                                                                              • overhead crane card
                                                                              • communication card for Profibus DP
                                                                              • communication card for Profibus DP V1
                                                                              • controller inside programmable card
                                                                              • communication card for DeviceNet
                                                                              • communication card for Ethernet/IP
                                                                              • communication card for Fipio
                                                                              • I/O extension card
                                                                              • communication card for Interbus-S
                                                                              • interface card for encoder
                                                                              • communication card for Modbus Plus
                                                                                • Noise level

                                                                                  63.7 dB conforming to 86/188/EEC

                                                                                  Dielectric strength

                                                                                • 3535 V DC between earth and power terminals
                                                                                • 5092 V DC between control and power terminals
                                                                                  • Electromagnetic compatibility

                                                                                  • 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
                                                                                  • conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
                                                                                  • electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
                                                                                  • electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
                                                                                  • radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
                                                                                  • voltage dips and interruptions immunity test conforming to IEC 61000-4-11
                                                                                    • Pollution degree

                                                                                    • 2 conforming to EN/IEC 61800-5-1
                                                                                    • 3 conforming to UL 840
                                                                                      • Vibration resistance

                                                                                      • 1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6
                                                                                      • 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
                                                                                        • Shock resistance

                                                                                          15 gn for 11 ms conforming to EN/IEC 60068-2-27

                                                                                          Operating altitude

                                                                                        • <= 1000 m without derating
                                                                                        • 1000...3000 m with current derating 1 % per 100 m
                                                                                          • Package 1 Weight

                                                                                            56.5 kg

                                                                                            Package 1 Height

                                                                                            4.6 dm

                                                                                            Package 1 width

                                                                                            8 dm

                                                                                            Package 1 Length

                                                                                            6 dm

                                                                                            WEEE

                                                                                            The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                                                                                            Show all specifications

                                                                                            Documents & downloads

                                                                                            hide show
                                                                                            Filter items
                                                                                            • All

                                                                                            • Product Brochures

                                                                                            • CAD Files and Packs

                                                                                            • Technical Data Catalogues

                                                                                            • Product Environmental

                                                                                            • End of Life Manual

                                                                                            • Installation Instruction

                                                                                            • Handout

                                                                                            • Data Bulletin

                                                                                            • Operating Manuals

                                                                                            • Certificates (MSDS)

                                                                                            • eTechPub

                                                                                            • Marine Certificate

                                                                                            • DTM Files

                                                                                            Frequently Asked Questions

                                                                                            hide show

                                                                                            Which ATV71 drives have the built in braking transistor?

                                                                                            Models with a rating of 160KW (250HP) or less have a built-in braking transistor.
                                                                                            ATV71H...M3, ATV71H...M3X and ATV71H075N4 to HC16N4 drives have a built-in dynamic brake transistor.
                                                                                            For ATV71HC20N4 to HC50N4 drives, a separate braking unit must be used.


                                                                                            CTA-ID : 2026409

                                                                                            What should be checked if an Altivar 61 or 71 display is showing NLP?

                                                                                            Issue:
                                                                                            Wondering what should be checked if an Altivar 61 or 71 display is showing NLP?

                                                                                            Product Line:
                                                                                            ATV61/71 drives

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Drive displays 'NLP'

                                                                                            Resolution:
                                                                                            NLP indicates that no line power is present on the L1, L2 & L3 input terminals of the drive controller.

                                                                                            Check voltage at the L1, L2 & L3 terminals.
                                                                                            Check for open circuits on line contactors, circuit breakers, disconnect switches, or fuses.

                                                                                            If NLP state does not change with correct voltage present on L1, L2, & L3, remove the control board and check for loose connections of ribbon cables inside the drive.
                                                                                            WARNING: This step should be performed while the drive is powered down, and proper personal protective equipment should be worn. 

                                                                                            For example: In an ATV71HC25N4 a customer found a loose X3 connector from the control board to the board behind and above the control board. This connector was on a ribbon cable that was about 1 inch by 1 inch. Drive ran OK after this was reseated.

                                                                                            Is there a problem using Altivar 61 or Altivar 71 drives delta power system?

                                                                                            Issue:
                                                                                            Wants to use Altivar 61 or Altivar 71 drives on delta power system.

                                                                                            Product Line:
                                                                                            Altivar ATV61 and ATV71

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Needs to know if the RFI filter needs to be disabled when using a corner grounded delta system?

                                                                                            Resolution:
                                                                                            As long as the input voltage remains within the normal range there should not be a problem.
                                                                                            This should be treated the same way as an impedance grounded system.
                                                                                            Remove the jumper to the left of the power terminal.
                                                                                            See the section of the installation manual for Operation on an IT (Isolated or impedance grounded neutral) system for details.
                                                                                            See the drives installation manual for more information and location of the RFI's filter tab.

                                                                                            The figure 1 example below is for the low horsepower ATV61 and ATV71 drives.


                                                                                                                                               Figure 1.

                                                                                             

                                                                                            Is there an offer for Nema 4X rated drives?

                                                                                            Issue:
                                                                                            Wondering if the ATV61 or ATV71 drives are available in type 4 or 4X enclosures?

                                                                                            Product Line:
                                                                                            Altivar ATV61 and ATV71 open type drives

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Needs to get the ATV61 and ATV71 drive in a NEMA 4 or 4X stand alone enclosure.

                                                                                            Resolution:
                                                                                            There is not a standard offering for type 4 or 4X enclosures for our drives.
                                                                                            It may be possible to install the drive in a properly selected enclosure by a local panel builder or contractor.
                                                                                            Or, contact a local SquareD field office for assistance. They may be able to offer assistance with other options.

                                                                                            Can the analog output of the ATV61 or ATV71 be set up as 0-10 VDC instead of 4-20 mA?

                                                                                            Issue:
                                                                                            Needs to set up a analog output of the ATV61 or ATV71 drive, to be set up as 0-10 VDC instead of 4-20 mA.

                                                                                            Product Line:
                                                                                            ATV61 and ATV71

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            NA

                                                                                            Resolution:
                                                                                            Yes.
                                                                                            Go to the Input/Output menu (1.5) and set AO1 type to voltage (0-10v range). Set AO1 assignment to the proper setting. The minimum and maxim range can also be adjusted inside the 0-10 V or 4-20  mA ranges.


                                                                                             

                                                                                            Why is the keypad not included with ATV61 and ATV71 drives?

                                                                                            Issue:
                                                                                            The keypad is not included with ATV61 and ATV71 drives.

                                                                                            Product Line:
                                                                                            Altivar 61 and 71 drives

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Customer concerned whether the HMI came with the drive

                                                                                            Resolution:
                                                                                            For all ATV61 and ATV71 drives without the letter Z at the end of the part number the keypad is included.
                                                                                            However, it is easy to not notice the keypad in the packaging material. The keypad is located inside folded cardboard that also functions as packing material. Check inside all folded cardboard packing materials. There is no sticker to indicate that the keypad is inside.

                                                                                            ATV61 & ATV71 drives with the letter Z at the end of the part number do not include the removable LCD HMI keypad display. These units do have a simplified LED display and programming keys on the face of the control board itself. The removable LCD HMI keypad display may be installed on these units.


                                                                                             

                                                                                            Do the electronic boards of the Altivar 61 and Altivar 71 drives have conformal coating?

                                                                                            Issue:
                                                                                            Do the electronic boards of the Altivar 61 and Altivar 71 drives have conformal coating?

                                                                                            Product Line:
                                                                                            Altivar ATV61 and ATV71

                                                                                            Environment:
                                                                                            Suffix S337 only

                                                                                            Cause:
                                                                                            Needs to know if you can order the ATV61 ATV71 drive with conformal coating?

                                                                                            Resolution:
                                                                                            For the ATV61 & ATV71 drives there is an option to have product treated for increased protection for dusty and corrosive environments. This product is not stocked. Add 'S337' to the end of the catalog number and multiply the listed price by 1.2 to obtain new price. With this option, exposed copper is tinned, circuit boards are conformal coated in critical areas and plastics are treated to better withstand the corrosive nature of certain oils. This option is standard on 55kW/75HP @ 230 Vac and higher & 90kW/125HP @ 460 Vac and higher.

                                                                                            The standard ATV61 and ATV71 drives are designed for maximum ambient pollution as follows:
                                                                                            ATV71:
                                                                                            H...M3, 71HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
                                                                                            HD18M3X to HD75M3X, HD22N4 to HC50N4 are Degree 3 conforming to IEC/EN 61800-5-1

                                                                                            ATV61:
                                                                                            H...M3, HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
                                                                                            HD18M3X to HD90M3X, HD22N4 to HC63N4 are Degree 3 conforming to IEC/EN 61800-5-1


                                                                                             

                                                                                            How many drive configuration files can be stored in the ATV71 keypad?

                                                                                            Issue:   
                                                                                            Storing drive configuration files in the ATV61 / ATV71 keypad.
                                                                                             
                                                                                            Product Line:   
                                                                                            ATV61 ,ATV71
                                                                                             
                                                                                            Environment:  
                                                                                            All
                                                                                             
                                                                                            Cause:  
                                                                                            Ffiles stored in keypad
                                                                                             
                                                                                            Resolution:   
                                                                                            The keypad can store up to 4 files.
                                                                                            To access and manage these files: Go to menu 1.12 (FACTORY SETTINGS) (FCS-)
                                                                                            See programming manual for details, if needed.


                                                                                             

                                                                                            What is the recommended Fuse or Circuit Breaker (OCPD) size for Altivar 61 drives?

                                                                                            Refer to the attached Quick Start Annex, document S1B86981. 
                                                                                             

                                                                                            When do the heatsink fans run on the ATV61 / ATV71 series drives?

                                                                                            Issue:
                                                                                            When do the heatsink fans run on the ATV61 / ATV71 series drives?

                                                                                            Product Line:
                                                                                            Altivar 61 and Altivar 71 series drives

                                                                                            Environment:
                                                                                            All models, All serial numbers.

                                                                                            Cause:
                                                                                            Information not available in current literature.

                                                                                            Resolution:
                                                                                            Heat sink fan operation differs depending on the frame size of the drive:
                                                                                            - for size 2 to 5B drives, fans start when the drive thermal state reaches a temperature level --> THD parameter = 70%.  The fans turns off when drive thermal is less than 60%
                                                                                            - for size 6 to 8 drives and 690V range drives, the fans run when the run command is given or when the drive thermal is greater than or equal to 70% and turns off when the drive thermal is less than 60% and runs for 1 minute after the run command is removed.
                                                                                            - for size 9 to 15 drives and 690V range drives, the fans run when the run command is given or when the drive thermal is greater than or equal to 70% and turns off when the drive thermal is less than 60% and runs for 10 minutes after the run command is removed.

                                                                                            For example, an ATV61HD18M3X drive (size 6), the heatsink fan starts when a Run command is given.


                                                                                             

                                                                                            What is the part number of the Main Control board for ATV71HD22N4?

                                                                                            Issue:
                                                                                            ATV71HD22N4:  Need to replace the Main Control board ?

                                                                                            Product Line:
                                                                                            ATV71

                                                                                            Environment:
                                                                                            ATV71HO75N4, ATV71HU15N4, ATV71HU22N4, ATV71HU30N4, ATV71HU40N4, ATV71HU55N4, ATV71HU75N4, ATV71HD11N4, ATV71HD15N4, ATV71HD18N4, ATV71HD22N4, ATV71HD30N4, ATV71HD37N4, ATV71HD45N4, ATV71HD55N4, ATV71HD75N4

                                                                                            Cause:
                                                                                            Need the Main Control board part number.

                                                                                            Resolution:
                                                                                            The Main Control board part number for these drive is VX4A71100Y

                                                                                            What is the part number for the remote keypad for the ATV31?

                                                                                            Issue:   What is the part number for the remote keypad for the ATV31?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Remote keypad kit
                                                                                             
                                                                                            Resolution:   The Altivar 31 remote mount keypad kit is VW3A31101.
                                                                                            The kit includes a keypad, mounting hardware and a 3 meter cable.


                                                                                             
                                                                                            Show More