Specifications

hide show
Range of product
Altivar 32
Product or component type
variable speed drive
Product destination
  • synchronous motors
  • asynchronous motors
    • Product specific application
      complex machines
      Function available
      -
      Assembly style
      with heat sink
      Component name
      ATV32
      EMC filter
      Class C2 EMC filter integrated
      Network number of phases
      1 phase
      [Us] rated supply voltage
      200...240 V - 15...10 %
      Supply voltage limits
      170-264 V
      Supply frequency
      50...60 Hz - 5...5 %
      Network frequency
      47.5...63 Hz
      Motor power kW
      0.55 kW at 200...240 V
      Motor power hp
      0.75 hp at 200...240 V
      Line current
    • 6.7 A for 240 V 1 phase 0.55 kW / 0.75 hp
    • 7.9 A for 200 V 1 phase 0.55 kW / 0.75 hp
      • Apparent power
        1.6 kVA at 240 V 1 phase 0.55 kW / 0.75 hp
        Prospective line Isc
        1 kA for 1 phase
        Nominal output current
        3.7 A at 4 kHz 240 V 0.55 kW / 0.75 hp
        Maximum transient current
        5.6 A for 60 s 0.55 kW / 0.75 hp
        Output frequency
        5.0E-4-0.599 kHz
        Nominal switching frequency
        4 kHz
        Switching frequency
        2...16 kHz adjustable
        Speed range
        1-100 for asynchronous motor in open-loop mode
        Speed accuracy
        +/- 10 % of nominal slip 0.2 Tn to Tn
        Torque accuracy
        +/- 15 %
        Transient overtorque
        170-200 %
        Braking torque
        <= 170 % with braking resistor
        Asynchronous motor control profile
      • flux vector control without sensor, standard
      • voltage/frequency ratio, 2 points
      • voltage/frequency ratio, 5 points
      • voltage/frequency ratio - Energy Saving, quadratic U/f
      • flux vector control without sensor - Energy Saving, NoLoad law
        • Synchronous motor control profile
          vector control without sensor
          Regulation loop
          adjustable PID regulator
          Motor slip compensation
        • automatic whatever the load
        • adjustable 0...300 %
        • not available in voltage/frequency ratio (2 or 5 points)
          • Local signalling
          • 1 LED red for drive voltage
          • 1 LED green for CANopen run
          • 1 LED red for CANopen error
          • 1 LED red for drive fault
            • Output voltage
              <= power supply voltage
              Noise level
              43 dB conforming to 86/188/EEC
              Insulation
              electrical between power and control
              Electrical connection
            • screw terminal, clamping capacity: 0.5...1.5 mm², AWG 18...AWG 14 (control)
            • removable screw terminals, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 12 (motor/braking resistor)
            • screw terminal, clamping capacity: 1.5...4 mm², AWG 14...AWG 10 (power supply)
              • Tightening torque
              • 0.5 N.m, 4.4 lb/ft (control)
              • 0.7 N.m, 7.1 lb/ft (motor/braking resistor)
              • 0.6 N.m, 5.3 lb/ft (power supply)
                • Supply
                  internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
                  Analogue input number
                  3
                  Analogue input type
                • AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits
                • AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits
                • AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits
                  • Sampling duration
                  • 2 ms (AI1, AI2, AI3) - analog input(s)
                  • 2 ms (AO1) - analog input(s)
                    • Response time
                    • LI1...LI6 8 ms, tolerance +/- 0.7 ms for logic output(s)
                    • R1A, R1B, R1C 2 ms for relay output(s)
                    • R2A, R2C 2 ms for relay output(s)
                      • Accuracy
                      • +/- 0.2 % (AI1, AI2, AI3) for a temperature of -10...60 °C
                      • +/- 0.5 % (AI1, AI2, AI3) for a temperature of 25 °C
                      • +/- 1 % (AO1) for a temperature of 25 °C
                      • +/- 2 % (AO1) for a temperature of -10...60 °C
                        • Linearity error
                        • +/- 0.2...0.5 % of maximum value (AI1, AI2, AI3)
                        • +/- 0.3 % (AO1)
                          • Analogue output number
                            1
                            Analogue output type
                          • AO1 software-configurable current 0...20 mA, impedance: 800 Ohm, resolution 10 bits
                          • AO1 software-configurable voltage 0...10 V, impedance: 470 Ohm, resolution 10 bits
                            • Discrete output number
                              3
                              Discrete output type
                            • configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
                            • configurable relay logic: (R2A, R2B) NO - 100000 cycles
                            • logic: (LO)
                              • Minimum switching current
                                5 mA at 24 V DC for configurable relay logic
                                Maximum switching current
                              • R1: 3 A at 250 V AC resistive load, cos phi = 1
                              • R1: 4 A at 30 V DC resistive load, cos phi = 1
                              • R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
                              • R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
                              • R2: 5 A at 250 V AC resistive load, cos phi = 1
                              • R2: 5 A at 30 V DC resistive load, cos phi = 1
                                • Discrete input number
                                  7
                                  Discrete input type
                                • programmable (sink/source) (LI1...LI4)24...30 V DC, with level 1 PLC
                                • programmable as pulse input 20 kpps (LI5)24...30 V DC, with level 1 PLC
                                • switch-configurable PTC probe (LI6)24...30 V DC
                                • safe torque off (STO)24...30 V DC - 1500 Ohm
                                  • Discrete input logic
                                  • negative logic (sink) (LI1...LI6), > 19 V (state 0), < 13 V (state 1)
                                  • positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)
                                    • Acceleration and deceleration ramps
                                    • deceleration ramp automatic stop DC injection
                                    • U
                                    • ramp switching
                                    • linear
                                    • S
                                    • CUS
                                    • deceleration ramp adaptation
                                      • Braking to standstill
                                        by DC injection
                                        Protection type
                                      • input phase breaks: drive
                                      • overcurrent between output phases and earth: drive
                                      • overheating protection: drive
                                      • short-circuit between motor phases: drive
                                      • thermal protection: drive
                                        • Communication port protocol
                                        • Modbus
                                        • CANopen
                                          • Connector type
                                            1 RJ45 (on front face) for Modbus/CANopen
                                            Physical interface
                                            2-wire RS 485 for Modbus
                                            Transmission frame
                                            RTU for Modbus
                                            Type of polarization
                                            no impedance for Modbus
                                            Number of addresses
                                          • 1-127 for CANopen
                                          • 1-247 for Modbus
                                            • Method of access
                                              slave CANopen
                                              Electromagnetic compatibility
                                            • 1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5
                                            • conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6
                                            • electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4
                                            • electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2
                                            • radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3
                                            • voltage dips and interruptions immunity test conforming to IEC 61000-4-11
                                              • Width
                                                45 mm
                                                Height
                                                325 mm
                                                Depth
                                                245 mm
                                                Net weight
                                                2.4 kg
                                                Option card
                                              • communication card for CANopen daisy chain
                                              • communication card for CANopen open style
                                              • communication card for DeviceNet
                                              • communication card for Ethernet/IP
                                              • communication card for Profibus DP V1
                                                • Standards
                                                • EN/IEC 61800-5-1
                                                • EN 61800-3 environments 1 category C2
                                                • EN 55011 class A group 1
                                                • EN/IEC 61800-3
                                                • EN 61800-3 environments 2 category C2
                                                  • Product certifications
                                                  • NOM 117
                                                  • CSA
                                                  • C-Tick
                                                  • UL
                                                  • GOST
                                                    • Marking
                                                      CE
                                                      Pollution degree
                                                      2 conforming to EN/IEC 61800-5-1
                                                      IP degree of protection
                                                      IP20 conforming to EN/IEC 61800-5-1
                                                      Vibration resistance
                                                    • 1 gn (f = 13-200 Hz) conforming to EN/IEC 60068-2-6
                                                    • 1.5 mm peak to peak (f = 3-13 Hz) conforming to EN/IEC 60068-2-6
                                                      • Shock resistance
                                                        15 gn for 11 ms conforming to EN/IEC 60068-2-27
                                                        Relative humidity
                                                      • 5-95 % without condensation conforming to IEC 60068-2-3
                                                      • 5-95 % without dripping water conforming to IEC 60068-2-3
                                                        • Ambient air temperature for operation
                                                        • -10-50 °C without derating
                                                        • 50-60 °C with derating factor
                                                          • Ambient air temperature for storage
                                                            -25-70 °C
                                                            Operating altitude
                                                          • <= 1000 m without derating
                                                          • 1000...2000 m with current derating 1 % per 100 m
                                                            • Operating position
                                                              vertical +/- 10 degree
                                                              Package 1 Weight
                                                              2.254 kg
                                                              Package 1 Height
                                                              0.85 dm
                                                              Package 1 width
                                                              2.75 dm
                                                              Package 1 Length
                                                              3.28 dm
                                                              Warranty
                                                              18 months

                                                              Documents & downloads

                                                              hide show
                                                              Filter items
                                                              • All

                                                              • CAD Files and Packs

                                                              • Product Brochures

                                                              • Technical Data Catalogues

                                                              • Product Environmental

                                                              • End of Life Manual

                                                              • Installation Instruction

                                                              • Operating Manuals

                                                              • Certificates (MSDS)

                                                              • eTechPub

                                                              • EDS Files

                                                              • GSD files

                                                              Frequently Asked Questions

                                                              hide show

                                                              Do we have CAD drawings for the ATV312 drives?

                                                              Issue:
                                                              Do we have CAD drawings for the ATV312 drives?

                                                              Product Line:
                                                              Altivar ATV312 and ATV31

                                                              Environment:
                                                              All

                                                              Cause:
                                                              Cad drawings

                                                              Resolution:
                                                              Use the following link to the CAD Drawings Catalog.

                                                              https://www.schneider-electric.us/sites/us/en/support/product-support-resources/3d-cad.page


                                                              CTA-ID : 2061638

                                                              What is the din rail mounting kit part number for the ATV312?

                                                              Issue:
                                                              What is the din rail mounting kit part number for the ATV312?

                                                              Product Line:
                                                              ATV312

                                                              Environment:
                                                              All

                                                              Cause:
                                                              Desire to utilize din mounting kit option

                                                              Resolution:
                                                              The part numbers need to order the mounting kit for this drive are VW3A9804 and VW3A9805.

                                                              VW3A9804 covers the following range of drives: ATV312....
                                                              018M2, H037M2, H055M2, H075M2, H018M3, H037M3, H055M3, H075M3

                                                              VW3A9805 covers the following range of drives: ATV312....
                                                              HU11M2, HU15M2, HU11M3, HU15M3, HU22M3, H037N4, H055N4, H075N4, HU11N4, HU15N4, H075S6, HU15S6
                                                              Note: The din rail mounting kits are only available for the above drives. 

                                                              Note: Other drives not list above do not have a din rail kit.

                                                              What is the part number for the remote keypad for the ATV31?

                                                              Issue:   What is the part number for the remote keypad for the ATV31?
                                                               
                                                              Product Line:   ATV31
                                                               
                                                              Environment:  All
                                                               
                                                              Cause:   Remote keypad kit
                                                               
                                                              Resolution:   The Altivar 31 remote mount keypad kit is VW3A31101.
                                                              The kit includes a keypad, mounting hardware and a 3 meter cable.


                                                               

                                                              Are the EMC filters for ATV31 drives UL or cUL listed?

                                                              Issue:   Are the EMC filters for ATV31 drives UL or cUL listed?
                                                               
                                                              Product Line:   ATV31
                                                               
                                                              Environment:  All
                                                               
                                                              Cause:   UL/CUL listing
                                                               
                                                              Resolution:   No. VW3A31401, VW3A31402, VW3A31403, VW3A31404, VW3A31405, VW3A31406, VW3A31407, VW3A31408 and VW3A31409 are not UL or CUL listed.

                                                               

                                                              What input is designed for a bipolar -10v to +10v input on the ATV32 drives?

                                                              Issue:
                                                              What input is designed for a bipolar -10v to +10v input on the ATV32 drives?

                                                              Product Line:
                                                              Altivar ATV32

                                                              Environment:
                                                              All

                                                              Cause:
                                                              AI2 is default for -10v to +10v input.

                                                              Resolution:
                                                              IO menu AI2 set up

                                                               Bipolar analog input 0 ± 10 V (maximum voltage ± 30 V)

                                                              The + or - polarity of the voltage on AI2 affects the direction of the set point and therefore the direction of operation.

                                                              • Impedance 30 kÙ
                                                              • Resolution: 10 bits
                                                              • Precision ±0.5% in 50/60 Hz for 25 °C, ±0.2% in 50/60 Hz for –10 to +60 °C at Äè = 60°C,
                                                              • Linearity ± 0.2% (max. ± 0.5%), of max. value
                                                              • Sampling time 2 ms

                                                              Can Class T fuses be used with Altivar 31 drives? The manual only references Class CC or J.

                                                              The ATV31 units were tested with the Class J fuses however the 600V version of the Class T fuses have equivalent ratings. So can use the 600V Class T fuses but not the 300V Class T fuses.

                                                              Is there a password to protect parameters in the ATV31 drive?

                                                              Issue:   Is there a password to protect parameters in the ATV31 drive?
                                                               
                                                              Product Line:   ATV31
                                                               
                                                              Environment:  All
                                                               
                                                              Cause:   Password
                                                               
                                                              Resolution:   Yes.
                                                              In the SUP menu, the COd parameter can be used to enter a numerical code that restricts access to adjustment parameters in the drive.  Only the display parameters are accessible, with only a temporary choice of the parameter displayed.

                                                               

                                                              Does it matter where the pull up / pull down resistors are located within the ATV31 multiple drive network?

                                                              Issue:   Does it matter where the pull up / pull down resistors are located within the ATV31 multiple drive network?
                                                               
                                                              Product Line:   ATV31
                                                               
                                                              Environment:  All
                                                               
                                                              Cause:   Terminating resistor
                                                               
                                                              Resolution:   Not really.
                                                                
                                                              The ATV31 does not have internal pull up / down resistors for the rs-485 communications. Therefore, if it is used on a network with PLC that also does not have pull up-down resisitors for the RS485 resistors must be added at one of the devices.
                                                              At one drive add:
                                                              10k resistor between +10 (RJ45 pin 7) and D_B (Communication +, RJ45 pin 4)
                                                              10k resistor between D_B and COM (RJ45 pin 8)
                                                              4.7k resistor between COM and D_A (RJ57 pin 5)


                                                               

                                                              Why does RDY flash on the ATV31?

                                                              Issue:   
                                                              Why does RDY flash on the ATV31?
                                                               
                                                              Product Line:   
                                                              ATV31
                                                               
                                                              Environment:  
                                                              All serial numbers
                                                               
                                                              Cause:  
                                                              Customer said drive was flashing RDY.
                                                               
                                                              Resolution:   
                                                              Flashing display normally indicated current limit mode. However, if this is occurring in the ready mode, it is likely due to incorrect motor parameter settings.
                                                              Specifically, it could be that the COS (motor power factor) is set to 1.
                                                              OR
                                                              Check the +10 and +24 VDC power supplies. It could be that they are being pulled down.


                                                               

                                                              What are the dimensions for the ATV31 keypad in the VW3A31101 remote mount kit?

                                                              Issue:   What are the dimensions for the ATV31 keypad in the VW3A31101 remote mount kit?
                                                               
                                                              Product Line:   ATV31
                                                               
                                                              Environment:  VW3A31101
                                                               
                                                              Cause:   Dimensions
                                                               
                                                              Resolution:   The keypad is 2.77(H) and 1.98(W) inches.
                                                              The exterior dimensions for the mounting bracket is 4.19 (4 - 3/16) inches tall, 2.625 (2 - 5/8) inches wide


                                                               

                                                              Do any of the ATV31 drives Not have an internal fan ?

                                                               

                                                              Issue:   Do any of the ATV31 drives Not have an internal fan ?
                                                               
                                                              Product Line:   ATV31
                                                               
                                                              Environment:  ATV31H018M2 & ATV31H018M2A & ATV31H018M3X & ATV31H018M3XA
                                                              ATV31H037M2 & ATV31H037M2A & ATV31H037M3X & ATV31H037M3XA
                                                              ATV31H055M2 & ATV31H055M2A & ATV31H055M3X & ATV31H055M3XA
                                                              ATV31H075M2 & ATV31H075M2A & ATV31H075M3X & ATV31H075M3XA
                                                               
                                                              Cause:   No heatsink fan
                                                               
                                                              Resolution:   Yes, the following do not have a heatsink fan:
                                                              ATV31H018M2 & ATV31H018M2A & ATV31H018M3X & ATV31H018M3XA
                                                              ATV31H037M2 & ATV31H037M2A & ATV31H037M3X & ATV31H037M3XA
                                                              ATV31H055M2 & ATV31H055M2A & ATV31H055M3X & ATV31H055M3XA
                                                              ATV31H075M2 & ATV31H075M2A & ATV31H075M3X & ATV31H075M3XA

                                                              Can the ATV312 be powered by an external 24V only?

                                                              Issue:
                                                              Powering the ATV312 by an external 24Vdc only

                                                              Product Line:
                                                               Altivar 312

                                                              Environment:
                                                              All

                                                              Cause:
                                                              Installation/programming
                                                               
                                                              Resolution:
                                                              No, this drive must have line voltage applied.  The voltage must be within -15% to +10% of the rated line voltage. 

                                                               
                                                              Show More