Quantcast

Altivar 12 Variable Speed Drive ATV12, 0.55kW, 0.75hp, 200..240V, 1ph

Altivar 12 Variable Speed Drive ATV12, 0.55kW, 0.75hp, 200..240V, 1ph

Altivar 12 Variable Speed Drive ATV12, 0.55kW, 0.75hp, 200..240V, 1ph

Item Number: ATV12H055M2

Product Dimensions

Width icon

Width72 mm

Height icon

Height143 mm

Depth icon

Depth131.2 mm

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Sustainable offer status

Green Premium product

Warranty

18 months

Product destination

asynchronous motors

Range of product

Altivar 12

Product or component type

variable speed drive

Physical

Connector type

1 RJ45 (on front face) for Modbus

Supply

  • internal supply for reference potentiometer: 5 V DC (4.75-5.25 V), <10 ma,="" protection="" type:="" overload="" and="" short-circuit="">
  • internal supply for logic inputs: 24 V DC (20.4-28.8 V), <100 ma,="" protection="" type:="" overload="" and="" short-circuit="">

Protection type

  • line supply overvoltage
  • line supply undervoltage
  • overcurrent between output phases and earth
  • overheating protection
  • short-circuit between motor phases
  • against input phase loss in three-phase
  • thermal motor protection via the drive by continuous calculation of I²t

Quantity per set

set of 1

Width

72 mm

Height

143 mm

Depth

131.2 mm

Net weight

0.8 kg

Relative humidity

  • 5...95 % without condensation conforming to IEC 60068...2-3
  • 5...95 % without dripping water conforming to IEC 60068...2-3

Ambient air temperature for operation

  • -10...40 °C protective cover from the top of the drive removed
  • 40...60 °C with current derating 2.2 % per °C

Product certifications

  • C-Tick
  • NOM
  • GOST
  • CSA
  • UL

Marking

CE

Ambient air temperature for storage

-25...70 °C

REACh Regulation

Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

X

Environmental Disclosure

ENVPEP090201EN

Circularity Profile

ENVEOLI100204EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

IP degree of protection

IP20 without blanking plate on upper part

Communication port protocol

Modbus

Others

Supply frequency

50/60 Hz +/- 5 %

Physical interface

2-wire RS 485 for Modbus

Transmission frame

RTU for Modbus

Transmission rate

  • 4800 bit/s
  • 9600 bit/s
  • 19200 bit/s
  • 38400 bit/s

Number of addresses

1...247 for Modbus

Communication service

  • read holding registers (03) 29 words
  • write single register (06) 29 words
  • write multiple registers (16) 27 words
  • read/write multiple registers (23) 4/4 words
  • read device identification (43)

Continuous output current

3.5 A at 4 kHz

Maximum transient current

5.3 A for 60 s

Speed drive output frequency

0.5...400 Hz

Braking torque

up to 70 % of nominal motor torque without braking resistor

Output voltage

200...240 V 3 phases

Electrical connection

terminal, clamping capacity: 3.5 mm², AWG 12 (L1, L2, L3, U, V, W, PA, PC)

Tightening torque

0.8 N.m

Insulation

electrical between power and control

Analogue input type

  • configurable current AI1 0...20 mA 250 Ohm
  • configurable voltage AI1 0...10 V 30 kOhm
  • configurable voltage AI1 0...5 V 30 kOhm

Discrete input type

programmable LI1...LI4 24 V 18...30 V

Discrete input logic

  • negative logic (sink), > 16 V (state 0), < 10="" v="" (state="" 1),="" input="" impedance="" 3.5="">
  • positive logic (source), 0...< 5="" v="" (state="" 0),=""> 11 V (state 1)

Sampling duration

  • 20 ms, tolerance +/- 1 ms for logic input
  • 10 ms for analogue input

Linearity error

+/- 0.3 % of maximum value for analogue input

Analogue output type

  • AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits
  • AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits

Discrete output type

  • logic output LO+, LO-
  • protected relay output R1A, R1B, R1C 1 C/O

Minimum switching current

5 mA at 24 V DC for logic relay

Maximum switching current

  • 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms logic relay
  • 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms logic relay
  • 3 A 250 V AC resistive cos phi = 1 L/R = 0 ms logic relay
  • 4 A 30 V DC resistive cos phi = 1 L/R = 0 ms logic relay

Braking to standstill

by DC injection, <30>

Frequency resolution

  • analog input: converter A/D, 10 bits
  • display unit: 0.1 Hz

Time constant

20 ms +/- 1 ms for reference change

Functionality

basic

Specific application

commercial equipment

Discrete and process manufacturing

Power range

0.55...1 kW at 200...240 V 1 phase

Motor starter type

variable speed drive

Discrete input number

4

Discrete output number

2

Analogue input number

1

Analogue output number

1

Asynchronous motor control profile

  • voltage/frequency ratio (V/f)
  • quadratic voltage/frequency ratio
  • sensorless flux vector control

Transient overtorque

150...170 % of nominal motor torque depending on drive rating and type of motor

Acceleration and deceleration ramps

  • linear from 0 to 999.9 s
  • S
  • U

Motor slip compensation

  • preset in factory
  • adjustable

Switching frequency

  • 2...16 kHz adjustable
  • 4...16 kHz with derating factor

Nominal switching frequency

4 kHz

Prospective line Isc

1 kA

Electromagnetic emission

  • radiated emissions environment 1 category C2 conforming to EN/IEC 61800-3 2...16 kHz shielded motor cable
  • conducted emissions with integrated EMC filter environment 1 category C1 conforming to EN/IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5>
  • conducted emissions with integrated EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 2...12 kHz shielded motor cable <5>
  • conducted emissions with integrated EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 2, 4 and 16 kHz shielded motor cable <10>
  • conducted emissions with additional EMC filter environment 1 category C1 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <20>
  • conducted emissions with additional EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <50>
  • conducted emissions with additional EMC filter environment 2 category C3 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <50>

Vibration resistance

  • 1 gn (f = 13-200 Hz) conforming to EN/IEC 60068-2-6
  • 1.5 mm peak to peak (f = 3-13 Hz) - drive unmounted on symmetrical DIN rail - conforming to EN/IEC 60068-2-6

Shock resistance

15 gn conforming to EN/IEC 60068-2-27 for 11 ms

Operating altitude

  • > 1000...2000 m with current derating 1 % per 100 m
  • <= 1000="" m="" without="">

Operating position

vertical +/- 10 degree

Assembly style

with heat sink

Electromagnetic compatibility

  • electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4
  • electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2
  • immunity to conducted disturbances level 3 conforming to EN/IEC 61000-4-6
  • radiated radio-frequency electromagnetic field immunity test level 3 conforming to EN/IEC 61000-4-3
  • surge immunity test level 3 conforming to EN/IEC 61000-4-5
  • voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11

Noise level

0 dB

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

1.141 kg

Package 1 Height

10.6 cm

Package 1 width

18.6 cm

Package 1 Length

18.6 cm

Unit Type of Package 2

P06

Number of Units in Package 2

45

Package 2 Weight

63.31 kg

Package 2 Height

73.5 cm

Package 2 width

60 cm

Package 2 Length

80 cm

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Component name

ATV12

Built-in fan

without

Network number of phases

1 phase

Motor power kW

0.55 kW

Motor power hp

0.75 hp

Line current

  • 8 A at 200 V
  • 6.7 A at 240 V

Speed range

1...20

Product specific application

simple machine

[Us] rated supply voltage

200...240 V - 15...10 %

EMC filter

integrated
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Product Environmental

  • End of Life Manual

  • Installation Instruction

  • Operating Manuals

  • eTechPub

  • Certificates (MSDS)

  • Software - Release

  • DTM Files

Frequently Asked Questions

hide show

What is part number VW3A4416?

Issue:
What is part number for an EMC filter for the Altivar 12 drives?

Product Line:
Altivar 12, ATV12, ATV11

Environment: 
ATV12H018F1
ATV12H037F1
ATV12H018M2
ATV12H037M2
ATV12H055M2
ATV12H075M2
ATV12P037F1
ATV12P037M2
ATV12P055M2
ATV12P075M2

Cause:
EMC Filter

Resolution:
Part number VW3A4416 is an externally mounted EMC filter that will fit these drives.