56HANDLE

Handle For 56 Portables

Catalogue Number: 56HANDLE
56HANDLE
Colour: Black
Colour: Per UOM Std.
  • Black 1 PCE

Specifications

hide show
Range of product
Series 56
Range
Clipsal - 56 Series
Product brand
Clipsal
Product or component type
handle
Accessory / separate part category
spare part
Market segment
  • small commercial
  • utility
  • industry
    • Net weight
      0.108 kg
      Targeted country
      Australia
      Ambient air temperature for operation
      -25-75 °C
      EU RoHS Directive
      Compliant
      Circularity Profile
      N/A

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • CAD Files and Packs

      • Technical Data Catalogues

      • Installation Instruction

      • Product Environmental

      • Operating Manuals

      • Specifications

      • Certificates (MSDS)

      • Corporate Marketing

      Frequently Asked Questions

      hide show

      What is the part number of the handle off of a 56SO4ELP15?

      It is 56HANDLE-BK

      Is there a quick fix for stuck screws on the vertical mounting rails of a NetShelter cabinet?

      Issue:
      The screws on the vertical mounting rail will not loosen.

      Product Line: 
      NetShelter Cabinets

      Environment:
      All versions and serial ranges

      Cause:
      Over-torqued rail screws.

      Resolution:

      Solutions for Stuck Screws:
      There are two ways that you can loosen stuck rail screws using tools that you may have on hand:
      1. The first way requires a T30 Torx socket and a socket wrench. Using this combination provides much greater torque onto the screw head and should loosen it easily.
      2. The second way requires a T30 Torx bit and an electric drill. In this method you tighten the bit into the drill and use the drill as a wrench. Do not turn the drill on. Loosen the bolt by hand turning the drill as you would a wrench.

      If you don’t have these tools on hand please contact *Schneider Electric Tech Support to RMA p/n 0M-5383. This is a T-handle combination Torx tool. It provides more torque than the included L-shaped tool, but not as much as the methods outlined above. The 0M-5383 can be used as a Torx screwdriver or T-handle wrench. To loosen stuck screws you should use the tool as a T-handle wrench.

      If you need to replace any damaged screws please contact *Schneider Electric Tech Support to RMA p/n 803-8008A.

      Note: you will need the model number and serial number of the cabinet in order to process an RMA. These can be found inside the rear doors on the upper frame.
      Please have this information ready when you contact your local *Schneider Electric Tech Support.

      *Contact information can be found in the Owner's Manual or online at www.apc.com under Support.

      What are the repair parts for the HU363SS, series F6? (may be shown as F06)

      Issue:
      Repair parts

      Product Line:
      Heavy Duty Safety Switch

      Environment:
      Repair parts

      Cause:
      Maintenance

      Resolution:
      The repair parts for the HU363SS, series F6 (F06) are as follows. No other parts are available.

      Line Base Assembly - 4056775250 (arc suppressor not included)
      -Line Base mounting screw - 4020515101 (3 required)
      -Arc Suppressor Assembly - 4056635550
      -Arc Suppressor mounting screw - 4020514501 (1 required)
      -Lug assembly - 4025101851 (per lug)
      -Lug Mounting Screw - 4020514202 (per lug)
      -Mechanism Assembly - 4056646950 (NOTE: Handle Coupling, Cover Interlock Defeat Coupling, and Lockplate Gaskets may also need replacing)
      -Handle Coupling - 4056699850
      -Cover Interlock Defeat Coupling - 4056699750
      -Handle Assembly - 4056894150 (also recommend replacing Lockplate Gaskets)
      -Lockplate - 4056894201 (also recommend replacing Lockplate Gaskets)
      -Lockplate Gasket - 4050322802 (2 required)
      -Lockplate mounting screw - 2194900001 (2 required)
      -Ground Lug - 4025101851 - (2 total required)
      -Ground Lug Mounting Screw - 4020514801



       

      Do you have a spare part for switch handle for 66CV563-RG?

      The handle is not available as spare the whole cover can only be supplied.

      Does the 31106 come with a handle?

       It comes complete with a direct handle. Extended rotary handles are available as an extra.

      What is the part number for an extended rotary handle for the 5LB3250?

      There are no longer any handles available for the 5LB C/B range. Customer will have to replace C/B as well as rotary handle.

      Is the Shaft available for the LV429338 as a spare part?

      No, - purchase the extended rotary handle (shaft and handle) LV429338

      Does part code 31288 - INS630B TO 2500 FRONT STD ROTARY HANDLE include a handle?

      No, the 31288 - INS630B TO 2500 FRONT STD ROTARY HANDLE does not come with a handle.

      Spare handle is part code 31296 (indent)

      Does the 31288 come with handle?

      31288 does not come with handle existing handle is reused on the extension kit.

      Wanting a spare handle for isolator...630 to 1600....31296 ...https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=31296
      and 2000 - 2500 ....31298..............................................https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=31298

       

      What is the part number for 7gn cam switch series handle

      This will need to be raised as special - "GCR_7 series handle R014" this will suit 7 series up to 25A but not 7gf10 ( these have no spare handles available or we would need to sacrifice a switch for the handle ) 32a and above have different handle again.

      Looking for a replacement handle for an old moulded case breaker Compact C800N

      There are no handles available

      What is the direct rotary handle for an NSX100

       The direct rotary handle is an LV429337

      What is the Rotary handle for a NS100 breaker

       Use a LV429337 rotary handle

      Can a Vario switch be flipped upside down

      Yes , but doing so would orientate the handle nomenclature upside down on the handle.

      What is the circuit breaker handle for Econo-Flex enclosure?

      Issue:
      What is the circuit breaker handle for Econo-Flex enclosure?

      Product Line:
      All Econo-Flex enclosures

      Environment:
      All Econo-Flex enclosures

      Cause:
      Enclosure circuit breaker

      Resolution:The circuit breaker handle is part number 9421MW3B

      What is the difference in handle length on a LAL36400MB vs a LAL36400?

      Issue:  
      What is the difference between LA36400 and LA36400MB?  

      Product Line:  
      Molded Case Circuit Breakers  

      Environment:  
      Legacy LA, LAL, LH, LHL circuit breakers  

      Resolution:  
      The MB breaker has a shorter handle, so that it will not interfere with the door closing on a panel.  

      Note:  
      The MB suffix has a handle that is .325 inches shorter than the standard handle.  

      What is the IP rating of the 28943 extended rotary handle ?

      The IP rating of the 28943 rotory handle is IP55

      Is the LV431050 (NSX) or 31050 (NS) extended rotary handle padlockable?

      Yes the handle has three M8 holes that can accept three padlocks.
       

      Will extended rotary handle LV432598 fit a NS400/630 Breaker?

      The extended rotary handle  LV432598 will fit a NS400/630 Breaker.
       

      Can a NetBotz HID door handle be used on the AR3200 NetShelter Colocation or NetShelter SV cabinets?

      Issue:
      NetBotz HID door handles will not latch when used on the NetShelter Colocation or SV cabinets.

      Product Line: 
      NetShelter SX Colocation, NetShelter SV

      Environment:
      All versions and serial ranges.

      Cause: 
      The hasp which ships with the HID door handles will not work on the NetShelter SX Colocation or NetShelter SV cabinets.

      Resolution: 

      Replacement hasps for the NetShelter SX Colocation and SV cabinets are now included with the HID door handle. The original hasp must be removed and replaced.

      What is the part number for the black handle only to suit extended rotary handle 28943?

      The part number for the black handle only to suit extended rotary handle 28943 is - 28962

      For further information visit the link below:-
      https://www.schneider-electric.com.au/en/search/28962
      User-added image

      Is the black handle available for the VCD0

      We only have the red handle here in nz = part code is KCD1PZ

      Once the combination for an AR8132A Combination Lock Handle has been lost can it be recovered or changed?

      Issue:
      The combination of the AR8132A has been misplaced. Can the combination can be recovered or reset? 
       
      Product Line:
      AR8132A
       
      Environment: 
      All versions and serial ranges. 
       
      Cause: 
      Lost combination for AR8132A
       
      Resolution :
      Please see attached file: 
       
      No Combination Recovery or Reset for AR8132A Lost Combination
       
       
      If lost, the combination for the AR8132A is not recoverable. The lock must be opened with the current combination before it can be reset.
      Once the combination is lost the only way to open the lock is with the included master override key (key 222).
      The only way to use a combination again is to replace the AR8132A whose combination has been lost.
      This is also true for the combination lock handles included on the AR3200 NetShelter Colocation Cabinet.
       
      Special note: if replacing the combination lock handle of an AR3200 with AR8132A you must reuse the hasp from the rear of the original AR3200 combination lock handle. Do not use the hasp that ships with the AR8132A, it will not work on the AR3200. The hasp on the rear of the original AR3200 door handle will unscrew. After removing it, simply swap it for the hasp on the replacement AR8132A. After completing this swap, and installing the replacement AR8132A, you will be left with the original AR3200 door handle that has an unknown combination and the hasp that came with the replacement AR8132A.
       
       
       
       
      Uncontrolled if printed. Electronic Storage and Reference Recommended.                                                   REV.2 20121030

      What is the equivalent of GV2AP01 and GV2AP02 rotary handle

      The equivalent of GV2AP01 and GV2AP02 rotary handles are GV2APN01          
       and GV2APN02 respectively.Refer attached file for more details

      What is the part number for an INS250 isolator and rotary handle?

      the part number for an INS250 isolator and rotary handle is - 31106 & LV431050

      For further information , visit links below:-
      https://www.schneider-electric.com.au/en/search/LV431050
      https://www.schneider-electric.com.au/en/search/31106
      User-added image
      User-added image
       

      Can the door interlock on the Rotary Handle for INS 250 be overridden to open door?

      INS rotary handles instructions show where the handle can be overridden to open the door. There is a small hole at the bottom of the escutcheon plate where a paper clip can be inserted to defeat the door lock temporarily. If the door lock needs to be permanently overridden there is a screw to turn that can only be accessed from the back of the handle interlock fitting inside the door.
      The instructions are attached.

      What is the part number for the locking handle used on QM-WP enclosures?

      Issue:
      Replacement N3R handle

      Product Line:
      Panelboards

      Environment:
      QMB

      Cause:
      Maintenance

      Resolution:
      All QM style WP enclosures require (1) 80121-063-50 locking handle assembly.
       

      Can a 100MPIR handle a wire wound or electronic transformers

      Yes

      Can a PDL 955RW handle 15A

      Yes, it is rated up to 16A

      Can the 15013 isolators handle a manual operation under load

       Yes they can

      What is the replacement handle for a VCD0

       The part code is KCD1PZ

      What is the part code for a Prisma P handle

      Part code 01221

      Does the GV2P22 have a rotary handle

       Yes it does.

      Will the Extended Rotary handles from the INS switches fit on the old IN switches

      No They are not backwards compatable. The INS Extended rotary handles only go with the INS switches

      Can the EMKA 1150-U56, -U56-01, -U58 be installed into a NetShelter SX cabinet?

      Issue: 
      We are unsure if the EMKA electromechanical release door handle will fit onto a NetShleter SX cabinet. 

      Product Line: 
      NetShelter SX 

      Environment: 
      All models, all serial numbers. 

      Cause: 
      A customer wants to install the EMKA electromechanical release door handle onto a NetShelter SX cabinet. 

      Resolution:
      Yes, the EMKA 1150-U56, 1150-U56-01 and 1150-U58 can be installed onto a NetShelter SX cabinet, but you must reuse the NetShleter SX cam. 

      How can the key for the Himel PLM enclosure be made captive to become a handle?

      The NSYCDBPLM needs to be dismantled, the key inserted into the barrel, then reinstalled in the door. Once this is completed the key becomes the handle for easy access.
      Instructions are attached.

      What is the part number for the spare MB handle?

      The part number for the spare handle for the MB Distribution board is CL001MB, and comes with a set of keys.

      ION Handles Protocol

      Issue:
      The ION handle may be required while troubleshooting a particular issue.

      Product Line:
      ION Devices
      Power Monitoring Expert

      Environment:
      ION modules
      Power Monitoring Expert Log Server and VIP

      Resolution:
      The ION Handles reference is attached. This tool allows you to lookup the ION Handles associated with a particular module.

      Note: The ION Handles reference is no longer updated as the handles constantly changing as different ION firmware keep adding to the overall list of registers/handles.

      Is there a door handle available that has two locks?

      Issue:
      A customer may want a door handle with two locks.

      Product Line: 
      NetShelter SX

      Environment:
      All versions and serial ranges.

      Cause:
      A customer may want two locks as an extra level of security.

      Resolution:
      Our door handle manufacturer EMKA offers two other door handle styles that will fit our SX cabinets. We don't sell them, but customers can purchase them from EMKA or their distributors.
      See attachments below for EMKA catalogue pages. 

      We offer AR8132A. It's a door handle with combination lock and a key. The combination is the main lock and will unlock the door handle without having to use the key. The key can be used to override the combination if the combination is lost. If the combination is lost it's not recoverable.
       
      NOTE: when replacing the original NetShelter door handle the original latching hasp from the rear of the existing handle must be moved over to the replacement handle. The hasp is attached by a single screw.
       

      What is the replacement operating handle for VCD__ Vario door mounted manual motor control switch?

      Issue:
      What is the replacement operating handle for VCD__  Vario door mounted manual motor control switch?

      Product Line:
      VCD02 VCD01 VCD0 VCD1 VCD2

      Environment:
      All

      Cause:
      Repair part

      Resolution:
      The operating handle is KCD1PZ.  It is a red handle with 60mm x 60mm yellow legend plate for single hole mounting. Note that the operating handle will accept up to three padlocks.

      What is the load break switch 63Amp 3P dinrail mounted with extended rotary handle

      You can use a 28902 load break switch with a LV428941 extended rotary handle

      What are the dimensions of the INS400 single handle transfer switch 31150?

      205mm x 395mm x 155mm (H x W x D) excluding the handle.
      Overall depth with standard handle is 213mm.
      See attached.

      Does the LV429338 rotary handle fit to the NS breaker series?

      Yes, NSX handle fits to the NS breaker series.

      What are the markings for the Extended rotary handle on a single handle transfer switch?

      They are labelled: I ON 1, O OFF, I ON 2
       

      What is the new code for INS250 Extended Rotary Handle ?

      Can I get a handle for the 7GF10/D90/U as a spare part?

      No, we don't do any spares for that range.

      What is the code for an extended rotary handle for 31052 (INS400) ?

      Code = 31052 Suits INS320 to INS 630 - Black

      What is part no for handle & plate to suit Schneider part no V1

      Part no KCE1YC

      Can our "D" contactors handle 480volts?

      Our "D" Contactors LC1D09 - LC1D65A are rated to 690volts AC and the LC1D80 to LC1D150 are rated up to 1000VAC/ 690VDC.

      Is handle available as spare part for rotary cam switch?

      Yes, but the part number is available as a special.