Angled image of 516 lampholder bc 2pin flush mount luminaire

Lamp Holders, Lampholder BC 2 PIN With looping Terminal - 100W Max

Catalogue Number: 516
Angled image of 516 lampholder bc 2pin flush mount luminaire
Retail
N/A
RRP (Inc. GST)
Colour White Electric (WE)
  • White Electric 1 PCE

Specifications

hide show
Product brand
Clipsal
Product or component type
BC lamp holder adaptor
Provided equipment
  • insulation shroud
  • lamp holder
  • skirt
    • Colour tint
      white
      Device mounting
    • surface
    • wall mounted
      • [Ue] rated operational voltage
        250 V
        Rated lamp wattage
        100 W
        EU RoHS Directive
        Compliant

        Frequently Asked Questions

        hide show

        What is the replacement for a PDL 556

        Use PDL 100MPIR + PDL 600RM relay

        If IEEE 519 is required, who enforces it? Citation concerns?

        IEEE 519 is recommended practice standard and not really mandatory; Utility may ask this to be enforced;

        What replaces the PDL 556 PIR sensor

        Use the PDL 100MPIR + 600RM if required to switch higher loads

        Does the 546 universal timer have an inbuilt override

        This does not have a manual override, you would need to use the 648TM with a 600RM in order to get that functionality

        What is the Steel rating for 173SS?

        The 173SS is rated at 316 Grade Steel

        Can you connect 24vdc or 120vac to the start terminals 5-6 on the S-flex enclosed drive?

        Issue:
        Can you connect 24vdc or 120vac to the start terminals 5-6 on the S-flex enclosed drive?

        Product Line:
        Altivar ATV21 or ATV212 S-flex enclosed

        Environment:
        All

        Cause:
        They have a start command with voltage and want to know if they can put it on the start terminals 5-6.

        Resolution:
        We only recommend that you put a dry contact between terminals 5-6 for the start command.  We are supplying the 120vac power to these terminals.  Please do not bring your own voltage into there terminals.

        What is the replacement for an old PDL PIR sensor 556 in a plate with auto / off / manual

        Now obsolete, would have to use the PDL 100MPIR in a PDL 681VH plate

        Are the 172SS saddles made from 316 Stainless Steel?

        Yes, the 172SS saddles are made from 316 stainless steel.

        Some of the key features are:
        • 0.9 mm gauge
        • 135 mm Maximum Slot Width
        • 5 mm diameter Hole
        • 39 mm Centres
        • 50 mm Length x 20 mm Width x 24 mm Height
        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=172SS

         

        What is the length of the Com'X 200/210/510 External GPRS antenna cable

        Product Line
        Com’X 200 (EBX200)
        Com’X 210 (EBX210)
        Com'X 510 (EBX510)

        Environment
        GPRS communication

        Resolution
        The length of the cable that comes with Com'X External GPRS antenna (Part# EBXAANT5M) is 5 meters (16 ft)

        Can I convert a decimal to a hexadecimal format string with SoMahine

        For example the decimal value is 2582.  The resuld would be A16 in a string.

        Solution.  OSCAT Basic library from : https://store.codesys.com/oscat-basic.html
        Use the DWORD_TO_STRH function block.
         

        What grade is the stainless steel used in Clipsal BSL cover plates?

        304 is the standard grade but we can get 316 as special.
        There is no set pricing for 316 grade plates, we need to get a quote from AU
        as it is a special and it will depend on the cost of the SS 316 
        at the time of manufacturing.

        Do any Altivar Drives meet IEEE 519 requirements?

        Issue:
        Do any Altivar Drives meet IEEE 519 requirements?

        Product Line:
        Altivar 680, ATV680 Active Front End

        Environment:
        Known Harmonics Issues

        Cause:
        All

        Resolution:
        The ATV680 product line with active front end built in will meet requriements to fall within the IEEE 519 System Specification.
        This is documented on page 13 of the ATV680 Low Harmonic Drive Systems Handbook (attached).
        Show More