Part no 80ML is not marked Fan
There is not a specific 45A mech - it comes assembled as a complete switch plate in Iconic range.
The part number for 40mm conduit plug is 220S40-GY.
The part number for Iconic switch mech 40M.
Yes, part number 41E6PBT3SBM can be used as run on Timer when used in conjunction with 40M.
The threaded length is 40mm
There are two , 1 on each end
114mm x 40mm x 44mm (H x W x D)
No unfortunately we don't have 40mm flexible conduit that is sheathed. However we do have standard flexible conduit. The part number is 9040TCM-GY.
Unfortunately we do not have a saddle spacer to suit 261/40, 40mm PVC saddle.
Part number for 40mm yellow head twist release push button is - ZB4BS55
Part number for fixing collar and normally closed contact block is - ZB4BZ102
ZB5AT8643M is a red 40mm push/pull mushroom with mechanical indicator that can also be illuminated.
The PDL56ED2/40 is deeper and has 40mm conduit entries The pdl56e2 is standard depth with 1 x 25mm and 1 x 32mm conduit entries
The Stop / Reset button is the mushroom head type - 40mm diameter
No. The other options for end plugs are on pages 113 and 116 of the 2014 Clipsal Pocketbook.
The ConneXium ring managed switch (499NxSx7100 model) sends out proprietary Bridge Protocol Data Unit (BPDU) messages every 20ms as a ring integrity heartbeat. Should a failure be detected, the minimum heal time is 2 BPDU cycles or 40ms for 2 ConneXium switches. Note that additional switches will increase the heal time accordingly due to latency but will range no more than 500ms in a maximum configuration of 50 switches.
Legacy KB System (APS) Data: RESL173814 V1.0, Originally authored by on , Last Edited by on
Related ranges: ConneXium - Ethernet
Yes, there is a rope pull switch transmitter available ZBRP1.
There is also a 40mm Black mushroom head push button ZB5RTC2. (This is not available in Red as wireless push buttons should not be used as Emergency stop)
80ML is rocker switch module, size S2 - 1 way / 2 way with Blue LED to suit the Strato or Modena range.
• Rocker switches with 16A rating for resistive and 16AX rating for inductive/capacitive loads.
• Terminal size maximised for ease of use.
• Fully shrouded and clearly marked terminals for faster installation.
Below is the configuration in S6 sized Grid plate
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=80ML
Please see the attached document for Wiring Configuration for 80MIL in a 3 way intermediate switching application in the Modena/ Strato Series.
Some of the key features are:
- Blue LED
- Terminals accommodates 4 x 1.5 sq mm cables each
- Intermediate/ Double Pole mechanism
- Front loading rocker switches
- 250V AC
- Available in various colours
- 80 Series (To suit Strato, Modena)
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=80MIL
Power Specifications for NetBotz Version 1 Appliances
NetBotz Version 1 Appliances
Power Specifications for Version 1 Appliances :
-The electrical specifications listed below for the all of the units 303, 310 and 400 (Wall and Rack units).
-Input Voltage- (Universal Power Supply) : 90 To 264 VAC
-Supply receptacle - IEC60320, C13
-Input Voltage (US power supply) : 100 - 240 VAC
-Input power in VA : 4W Typical
-Current ( @ 100V): 40mA Typical
-Heat dissipation in BTU: 14 BTU / Hour
Yes, but requires the use of proper outdoor/underground cables of the correct build and standard and is not to exceed the maximum length - Xanbus total 40m @ 250kbps.
Requires the use of Ethernet Cable designed for underground use. Can use CAT 5e or CAT 6 JELLY FILLED cable with correct outdoor rating and is compliant with local standards.
What Padlock Device can be used on the 9001KR9R E-stop Pushbutton?
NOTE: These attachments will not work when the operator is supplied with a 2 1/4 inch diameter mushroom.
What is a 9001KR9R and a 9001KR9RM94?
Harmony Push Buttons
The mushroom head on a 9001KR9R is a screw on, 41mm, and plastic.
The 9001KR9RM94 mushroom head is screw on with set screw, 40mm and metal.
There are three different types available. The standard size is 30 x 40mm and there is an extended black or red legend holder/plate which is 30 x 50mm.
Each legend plate comes reversible with a different colour on either side.
Black or red background ZBY2101
White or yellow background ZBY4101
Black or red background
Extended 30 x 50 ZBY6101
What is the guard for a 22mm push-pull mushroom head operator, similar to cat. no. 9001 K56*M?
Pushbutton and Operator Interface
22mm, XB4, XB5, ZB4,ZB5
Catalog number ZBZ160* is a metal guard for 40mm mushroom head operator.
What is the difference between ZB4BZ2005 and ZB4BZ1905 are the mounting holes the same size?
Harmony Push Buttons
ZB4BZ1905 is 70 mm in diameter
ZB4BZ2005 is 72mm top to bottom X 40mm from side to side.
Need the height of pushbutton guard part # ZB4BZ1905.
Harmony Push Buttons
Height is 38mm.
Is the mushroom lens for a XB2BN or standard ZB2BW illuminated mushroom button replaceable?
Legacy Push Buttons
Replacement mushroom lenses were as follows:
Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
What is the significance of the "9" suffix on numbers such as the XACA029, XACA069 and XACA049 pendant stations?
Harmony Control Stations
The "9" suffix simply means factory assembled and requires the use of the order form (key sheet).
Need to know the part number for the replacement boot on the XACA94** operators.
XACA pendant stations
XACA Standard Duty Station
Replacement boots are not available for the XACA booted operators. Suggest ordering complete new booted operator in the XACA line of products.
Needs the cable sleeve part number for the XACB pendant station.
Protective cable sleeves with cable tie ( for tightening sleeve onto cable)
For enclosures XACB219 and XACB220 (2-way) for cable 07...13mm
For enclosures XACB... 4 to 12-way and XACM...4 and 8-way
for diameter 10...22mm use XACB960
for diameter 22...35mm use XACB965