The codes are
60TSRM3 Saturn OneTouch master electronic switch, 3-wire, 6AX, integral relay
60TDM Saturn OneTouch master dimmer, 2-wire, 350 W max, suitable for Clipsal LEDs
60TDSM Saturn OneTouch remote dimmer/switch, supports up to three-way dimming and switching Wall plates —
Available in colours EB, OM, PW
4061TC 1 gang grid and cover plate, Saturn OneTouch — standard size
4062TC 2 gang grid and cover plate, Saturn OneTouch — standard size
4063TC 3 gang grid and cover plate, Saturn OneTouch — standard size
4064TC 4 gang grid and cover plate, Saturn OneTouch — standard size
4065TC 5 gang grid and cover plate, Saturn OneTouch — standard size
4066TC 6 gang grid and cover plate, Saturn OneTouch — standard size
4061ATC 1 gang grid and cover plate, Saturn OneTouch — architrave size
4062ATC 2 gang grid and cover plate, Saturn OneTouch — architrave size
4062TFC 2 gang grid and cover plate, Saturn OneTouch, suits fan control switch 4060CSFM and Saturn OneTouch mechanisms
The switch mechanism that goes into the 4061TC is a 60TSRM3.
Unfortunately no. Saturn OneTouch mechanisms have to be ordered separately.
Saturn onetouch mechanisms to suit the plates are:
60TSRM3 - Saturn OneTouch master electronic switch, 3-wire, 6AX, integral relay
60TDM - Saturn OneTouch master dimmer, 2-wire, 350 W max, suitable for Clipsal LEDs
60TDSM - Saturn OneTouch remote dimmer/switch, supports up to three-way dimming and switching
For further information, please visit: https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000293.pdf
The dimensions are 34mm (W) X 97.5mm (H)
You can use an Incandescent lamps, 240V halogen / dichroic lamps, and selected dimmable CFL's. One dimmer is suitable for nearly all
Yes, the part name is 4061PBC
Dimmer Mechanism 220-240Vac, 50Hz, 350W. Leading and Trailing edge phase control.
You need to use part codes 4062TC + 2 x 60TSM
The plate dimensions are the same for 1 gang and 2 gang saturn architrave
97mm Hx 38mm W
Switch Mechanism, 220-240Vac, 50Hz, 400W
Standard plate size - 116mm long x 76mm wide x 11mm thick
You can use a 4000VH1 to hide it
4061D32 and 4061/45 cooker switches are supplied with a spare labeled mechanism cap that is marked COOKER to replace the unmarked cap. Picture attached.
Thus the customer has the choice to use 4061D32 and 4061/45 either marked COOKER or unmarked.
No unfortunately this is a one-way device and cannot be two-wayed as it is integrally switched. If you wish to two-way dim a circuit you will need to use a master and slave mechanism in the OneTouch Series. To create such a setup you would require a 2X 4061TC, 60TDM and a 60TDSM.
Saturn One touch is now obsolete.
The part codes are 4061TC (OM - Ocean Mist and PW - Pure White) this is just the plate 4062TC-xx, 4063TC-xx 4064TC-xx 4066TC-xx are the other plates.
The Onetouch switch is 60TSRM3, which is 6AX 3 wire and requires a neutral connection.
The Onetouch dimmer module code is 60TDM, 350W max, does not require neutral connection.
The dimmer/switch secondary mech is 60TDSM. This can act as a slave for either the 60TSRM3 or 60TDM to allow 2 and 3 way switching and dimming. Does not require neutral connection.
See wiring diagram for typical dimmer and switch application
The overall dimensions for the 4061 Saturn Architrave switch is 34mm(W) X 97.5mm (H) 31.6mm(D)
Some of the key features are:
- 1 gang
- LED lighting Indication
- 4000 series saturn architraive
- horizontal and vertical mounting
- 16AX switching current for fluorescent lamps
Please see diagram below:
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061AL
No the One Touch range has been discontinued. Iconic would be the best option for a similar product, though the One Touch range used a Saturn 250v cover plate.
Yes, the 4066PBC is just the cover only.
Unfortunately not, 4061/45 does not have an LED indicator
Yes, Due to a change in the Wiring Regulations these now have to be lablled with 'Cooker' on the switch.
The 4063PBC is just the cover only. If you would like the grid plate as well the part number would be 4063VH.
No , The 60R32 series mechs are only designed to go into the 4025XA and 4025XUA plate styles. If Mechs over 32 amp are required for Saturn plates then you will need either 4031VH plate and 30M35 series mechs or the dedicated cooker plates 4061D32 or 4061/45 series
No, The switch plate has the cap eg. 4061VH. The Button mounts onto the switch plate behind the cap.
Yes it does, they are supplied with the part.
The part number for Saturn cover to suit is a - 4061/45C
No, a 30USBC mech will not fit a 4061VH or 4061PBL or similar plates
30USBC mechs will only fit a 4031VH or similar communication plates as 30USBC is a 30 series style of mech
, however we do offer a slightly different styled switch in the saturn range which is capable of 45A.
The button is an oval shape and slightly larger. The part number is 4061/45
Some of the key feaures are :
- 1 Gang
- 250V AC rated
- Saturn Series
- Electric cooker switch
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061/45
No, unfortunately there isn't a 32A switch that fits in a 2 gang Saturn switch plate.
The only 32A switches in the Saturn series are the 60R32 that fits in the 4025XA and the 4061D32 cooker switch.
For further information please visit https://www.clipsal.com/Trade