30MECH - USB Charger with white cap

Catalogue Number: 30USBCM

30 Series USB Charger Mechanism With White Cap, 1.2A

30MECH - USB Charger with white cap
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
  • 30 Series USB Charger Mech suits most Clipsal Switch Plate styles and colours, including Clipsal 2000 Series™, C2000™, Saturn™ Data, Slimline® and Standard.
  • Fit up to three USB Charger Mechs per plate.
  • Available as a single mech or in a variety of pre-assembled Clipsal Wall Plate combinations.
  • Match coloured plates with compatible colour caps, to suit decor or identify type of power in a commercial environment.
  • Able to be retrofitted, quickly, into Clipsal Wall Plates with 30 Mech apertures.
  • Able to reduce overall system load and infrastructure by replacing standard GPOs with 30 Series USBs.
  • Meets five-star energy ratings for efficiency with extremely low standby power (< 0.07W).
  • Cable compensation allows devices to be charged quickly (compliant with USB Charging Specification BC1.2).
  • Inbuilt protection for surge, over-temperature and over-current occurences.
Product brand
Clipsal
EU RoHS Directive
Compliant
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information

Frequently Asked Questions

hide show

Will 30USBCM fit on 4025XA?

No. 30USBCM will only fit on plates that can accept 30 series mechanisms. Eg : 4031VH-WE

Will 30USBCM fit on 25XA, twin outlet with extra switch?

Unfortunately not. 30USBCM will not fit on 25XA. We have 2025USBC, C2025USBC, 4025USBC and Z4025USBC twin outlets with 30USBCM assembled on the plate.
For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000294.pdf

Is there a USB charger mech which fits on the 4025XA?

No. Need to use the 30USBCM on the 403*VH plates

USB MECHANISM for Clipsal C2000 range ?

Code = 30USBCM

Will the USB mechanism 30USBCM fit into the Saturn power point 4025XA?

No it is not suitable for the Saturn power point 4025XA. However the USB mechanism 30USBCM will fit on 403*VH saturn communication plates.

* - 1,2,3,

Will 30USBCM fit into 25XD socket outlet

Yes the 30USBCM will fit into 25XD.

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=25XD
 

- Does the 30USBCM fit into 2025XA and C2025XA

Yes it will fit into 2025XA / C2025XA, with the following mounting hardware only: 154, 154RM, 154/1, 155NAR, 155VNAR, 155PRM, 156/2, 157, 164, 449A. Will not fit SC2025XA / 25XA. ( Also please note that it will need to be placed into plate in vertical configuration)
For more information on the 30USBCM please visit the Clipsal web site or click  link provided .https://www.clipsal.com/Trade/search-results?q=30usbcm

Is there a USB charger Mechanism available in the Saturn range ?

Need to use the 30USBCM + Saturn communication plate 403*vh-**
For more information on the USB charger mech ( 30USBCM ) please visit the Clipsal web site on the link provided https://www.clipsal.com/Trade/search-results?q=30usbcm
For more information on the Saturn series please visit the Clipsal web site on the link provided https://www.clipsal.com/Trade/search-results?q=saturn

Can you fit a 30USBCM into a SC2025XA?

This will not fit as not a standard mech size

What is the part number for a USB Charging mech in the Clipsal 30 series

The part code is 30USBCM

What parts are required to make a zen range USB shelf plate


Z4032VH + x2 30USBCM + Z4032HS 

What is the 800 series adaptor required to fit a 30USBCM mech into an 800 series plate?

PDL800MAC Is the 30 series adapter mech.
  • PDL800MACWH for white
  • PDL800MACBK for black

Can the 30USBCM charger fir into the Saturn 4062 plate

No, the 30USBCM Chargers are a 30 series mechanism and will only fit into the 403x plates. The 4032VH is the plate to use for a dual USB charger plate.

Will 30USBCM fit on a C2000, Classic series plate?

30USBCM will fit on C2015X / C2015XX / C2025X* / Up to 3-gang Classic series switch plates.
For further information on 30USBCM, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USBCM
 

Does the 30USBCM fit in a Z4025XUA?

No, unfortunately the 30USBCM does not fit in a Z4025XUA.

However you can get a double outlet with a USBCM already fitted. The part number is Z4025USBC.

Some of the key features are:
  • Single 30USBCM in double GPO available as a standard reference in all colours of Saturn, Saturn Horizon and Saturn Zen
  • Smart 30USBCM Charger optimizes charging time and current through: A) BC1.2 Standard Compliance; B) Cable Compensation
  • 30USBCM includes short-circuit, over-voltage and over-temperature protection
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=Z4025USBC










 

How to obtain a Black Classic Double GPO with USB charger?

Use the following parts:
30USBCM
C2025XA
USB-CAPS-BK

What is the Part number for a Black 30 series usb mech

30USBCM (comes with white cap)  + USBC-CAPS-BK  (comes with 5x black caps)

Can a usb charger mech be fitted to the 4025xa?

No it can not - we recommend fitting the 30USBCM to the Saturn communication wall plates eg 4031VH

Is it possible to charge Apple devices with the 30USBCM?

Part no 30USBCM is able to charge iPhone, iPad, iPad Mini & iPod.

What is part number for 1 gang Saturn plate to accommodate 30USBCM?

Part number 4031VH will accommodate 30USBCM.

What is the part number for a slimline horizontal switched socket with USB charger

That can be made using the following two parts:
SC2015X-WE
30USBCM

Does the 30USBCM fit into a C2025XA?

Yes, it does as long as it is mounted vertically.

For more information, please refer to the link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USBCM 
https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2025XA 


What is the current rating of the USB mechanism in C2015USB2C (C2015 Single 10A GPO with 2 x USB Chargers)?

30USBCM is the USB mechanism used in C2015USB2C. The output current rating of 30USBCM is 1.2A max at 5.0Vd.c.
For further information on please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000294.pdf

Will the USB mechanism 30USBCM fit on the power point Z4025XA?

No it is Not suitable for the power point Z4025XA. However, there is a ZEN double powerpoint with USB mechanism already assembeled. The part number is Z4025USBC.
Alternatively, the 30USBCM will fit on Z403*VH Zen communication plates.
*  =  1,2,3, (number of mechanisms to fit in the plate)

Some of the key features of the 4025USBC are:
  • Single 30USBCM in double GPO available as a standard reference in all colours of Saturn, Saturn Horizon and Saturn Zen
  • Smart 30USBCM Charger optimizes charging time and current through: A) BC1.2 Standard Compliance; B) Cable Compensation
  • 30USBCM includes short-circuit, over-voltage and over-temperature protection
  • Fully compliant to all appropriate Australian Standards for Power Sockets and USB Chargers
  • 30USBCM is protected under Australian Standard Patent Application No 2011334615
  • Designed in Australia for Australian conditions and standards
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4025USBC
 


 

Can the USB mechanism (mech) be placed in a double power point with extra switch (eg c2025xa)

Although not recommended but yes it can be done. When doing this make sure all wiring is complete before inserting USB mechanism in place due to the fact that you will not be able to access the Active terminal.
Also this cannot be used with a standard wall plate it is recommended to use a 154 c clip to install as the wall plate hits the top of the mechanism.

Is the USB mechanism 30USBCM available in other colours?

No, as standard is white. However caps that clip over the top are avaliable which are:
 
Colour Part number
 Arctive silver USBC-CAPS-3A
Chrome Shadow Black USBC-CAPS-3S
Black USBC-CAPS-BK
Brown USBC-CAPS-BR
Cream USBC-CAPS-CM
Dark Blue USBC-CAPS-DB
Desert Sand USBC-CAPS-DS
Green USBC-CAPS-GR
Red USBC-CAPS-RD
Soft Grey USBC-CAPS-SG

Do you have a C2025 with a USB charger fitted?

Yes, we do have a C2025 with a USB charger fitted. The part number is C2025USBC.

Some of the key features are:
  • Single 30USBCM in a white twin power outlet
  • Smart 30USBCM USB charger optimizes charging time and current through: BC1.2 Standard Compliance and Cable compensation
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2025USBC
 

What is the part number for 2025 with USB charging mech?

The part number is 2025USBC

Please click this link for more information
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2025USBC
 

Key Features

  • Single 30USBCM in a white twin power outlet
  • Smart 30USBCM USB charger optimizes charging time and current through: BC1.2 Standard Compliance and Cable compensation
  • 30USBCM includes short-circuit, over-voltage and over-temperature

User-added image
 

What is the part number for a C2025 with USB charger?

The part number is C2025USBC.

Some of the key features are:
  • Single 30USBCM in a white twin power outlet
  • Smart 30USBCM USB charger optimizes charging time and current through: BC1.2 Standard Compliance and Cable compensation

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2025USBC

What is the part number for a Zen USB Mech?

Unfortunately there is no mech designed specifically for the zen range, however there is a zen outlet with a power point in it or you can get the 30usbcm and put that in a Z4031VH ZEN communications plate

What are the part numbers for a 4063VH with a usb mech in it?

We dont sell that conversion part plug as a spare part. the usb part number is a 30USBCM

What is the part number for a power point in black?

C2025UXA-BK classic power point in black plus
 
30USBCM  USB Mech

USBC-CAPS-BK  black cap for usb mech

30USBCM - Does clipsal have a higher rated USB charger?

No. but Due to the 30USBCM charger featuring cable compensation which increases the 'static' charging current by as much as 10% compared to other chargers. This charger is suitable for use with higher current devices such as tablets.
Very Few products actually require more than 1.2A to charge. The device controls how much current is required - not the charger.
Even for devices that can use 2.1A. This current is typically used for a very short time when the device is completely flat. once the device is afew percent charged, the current drops back substatially to around 1A

Is the adapter for the USB charger mechanism to Saturn plates available?

No, unfortunately this product hasnt been released as a spare part, only as an entire unit.

The part number for the entire unit is 4025USBC.
Some of the key features are:
  • Single 30USBCM in double GPO available as a standard reference in all colours of Saturn, Saturn Horizon and Saturn Zen
  • Smart 30USBCM Charger optimizes charging time and current through: A) BC1.2 Standard Compliance; B) Cable Compensation
  • 30USBCM includes short-circuit, over-voltage and over-temperature protection
  • Fully compliant to all appropriate Australian Standards for Power Sockets and USB Chargers
  • 30USBCM is protected under Australian Standard Patent Application No 2011334615
  • Designed in Australia for Australian conditions and standards
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4025USBC


 

Is there a double horizontal socket with a USB charger available in the Saturn Zen range?

The part number for a double horizontal socket with a USB charger is a Z4025USBC.
Some of the key features are:
  • Single 30USBCM in double GPO available as a standard reference in all colours of Saturn, Saturn Horizon and Saturn Zen
  • Smart 30USBCM Charger optimizes charging time and current through: A) BC1.2 Standard Compliance; B) Cable Compensation
  • 30USBCM includes short-circuit, over-voltage and over-temperature protection
  • Fully compliant to all appropriate Australian Standards for Power Sockets and USB Chargers
  • 30USBCM is protected under Australian Standard Patent Application No 2011334615
  • Designed in Australia for Australian conditions and standards
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=Z4025USBC

Can i convert my 4025XA from extra switch to a USB charger?

No, unfortunately we don't sell the bezel as a spare part to fit it into that particular outlet. However, it is available as an already assembled item. The part number is a 4025USBC.
Some of the key features are:
  • Single 30USBCM in double GPO available as a standard reference in all colours of Saturn, Saturn Horizon and Saturn Zen
  • Smart 30USBCM Charger optimizes charging time and current through: A) BC1.2 Standard Compliance; B) Cable Compensation
  • 30USBCM includes short-circuit, over-voltage and over-temperature protection
  • Fully compliant to all appropriate Australian Standards for Power Sockets and USB Chargers
  • 30USBCM is protected under Australian Standard Patent Application No 2011334615
  • Designed in Australia for Australian conditions and standards
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4025USBC
 

Do you have a Saturn double outlet with 2 usb chargers?

No, we have a double outlet with a single USB charger. The part number is 4025USBC.

Some of the key features are:
  • Single 30USBCM in double GPO available as a standard reference in all colours of Saturn, Saturn Horizon and Saturn Zen
  • Smart 30USBCM Charger optimizes charging time and current through: A) BC1.2 Standard Compliance; B) Cable Compensation
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4025USBC



 

Do I have to buy the 4025USBC complete or can I put it together myself?

To get the Saturn double outlet with a USB charger You must buy it complete. The part number is 4025USBC.

Some of the key features are:
  • Single 30USBCM in double GPO available as a standard reference in all colours of Saturn, Saturn Horizon and Saturn Zen
  • Smart 30USBCM Charger optimizes charging time and current through: A) BC1.2 Standard Compliance; B) Cable Compensation
  • 30USBCM includes short-circuit, over-voltage and over-temperature protection

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4025USBC
 

How many USB charger mechs can be put on a plate?

It is not recommended to fit more than a maximum of three USB Charger Mechs , part# 30USBCM, 
Please see attached instruction sheet or
For more information on the USB Charger mechs please visit the Clipsal web site on the link provided
https://www.clipsal.com/Trade/search-results?q=usb%20charge

Does Clipsal sell assembled double outlet with the USB charger mech?

No , We have sinlge outlets with USB chargers or you can fit 1 x  USB charger mech to either a 2025XA or a C2025XA ( in vertical configuration )

For further information on this please visit the clipsal web site on the link provided
https://www.clipsal.com/Trade/search-results?q=30usbcm

When putting a 30USBCM in a 403X Saturn Plate how do I match the silver colour of the switches?

Buy the cap pack in different colour options:
USBC-CAPS-3S - Pkx5 Chrome Shadow caps for USB mech (suits Saturn, Horizon Silver & Horizon Black) 
USBC-CAPS-3A - Pkx5 Arctic silver caps for USB mech (suits Saturn, Pure white & Ocean)
 

What is the part number for a Classic single GPO with 2 USB outlets in Black?

The part number for a Classic single GPO with 2 USB outlets in Black is - C2015XX   + 30USBCM   +   USCBC-CAPS-BK

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=C2015XX
User-added image

What is the part number for a USB switch mech in Black?

The part number for a USB switch mech in Black is - 30USBCM & USBC-CAPS-BK

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=30USBCM
https://www.clipsal.com/Trade/search-results?q=USBC-CAPS
User-added image

What is the part number for a saturn series 3 gang switch plate that will hold 3 x 30USBCM?

The part number for a saturn series 3 gang switch plate that will hold 3 x 30USBCM is - 4033VH
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=4033VH

User-added image

What Saturn plate can I put two USBchargers in?

You would use a 4032VH to fit two 30USBCM in.

Some of the key features are:
  • Accepts 30 Series mechanism
  • Less mechanism
  • With data/communication, 30PB and 30PBL

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4032VH

what is the part number for a preassmbled plate with 2 usb charger mechs ?

There are 2 options currently available, C2015USB2C-WE and 2015USB2C-WE
For more information on the USB cahrger and plate options please visit the Clipsal web site on the link provided
https://www.clipsal.com/Trade/search-results?q=usb
   
   

Do you have a double usb charger?

No, we only have the single USB charger.
You can get a single outlet with 2 USB chargers part number C2015USB2C.

Some of the key features are:
  • C2015 10A GPO
  • Twin 30USBCM USB Chargers
  • Surge, over-current and over-temperature protection
  • Cable compensation for optimised charging

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2015USB2C
 

 

Can I put a USB charger in a Zen plate?

Yes, a 30USBCM will fit in the Z4031VH communication plate.

Some of the key features are:
  • Suits standard mounting accessories
  • All products supplied with black mounting grids as standard

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=Z4031VH
 

 

Can the SC2025XA double outlet with extra switch fit a 30USBCM USB charger?

Yes, the 30USBCM charger will fit in to the SC2025XA.  However, there is a plastic tab on the SC2025XA that needs to be removed with a pair of pliers.
Once the tab is removed the USB mechanism will then fit.

Some of the key features are:
  • Fit up to three USB Charger Mechs per plate.
  • Available as a single mech or in a variety of pre-assembled Clipsal Wall Plate combinations.
  • Match coloured plates with compatible colour caps, to suit decor or identify type of power in a commercial environment.
  • Able to be retrofitted, quickly, into Clipsal Wall Plates with 30 Mech apertures.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USBCM.
 
 

Can 4 off 30USBCM installed in INS43640, hydraulic pop up desk unit?

Yes, 4 off 30USBCM can be fitted in INS43640. INS43640 Pop-up function desk unit is six-sided, operated by a gas spring. Configured with 3x double power outlets, Australian standard, with 3m 1.5mm2 power cable without plug and 4x 30 Mech/keystone data outlets. Including fixing clamp and hooks for excess cables. When inactive, the box lies flush with the desk-top. By a light pressure on the top, a gas spring becomes activated and makes the box pop up from the desk surface. As soon as the box is not in use, it is easily pressed back to the flush level.
Hole dimension: Ø 216mm.
Material: Aluminium, powder coated grey RAL 9006
Colour: Grey
Dimensions: 325mm(H) / Ø236mm diameter
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=INS43640
User-added image