swt 1g arch mini 1/2w 10a

Flush Switch, 1 Gang, 1-Way/2-Way, 250VAC, 10A, Miniature Architrave

Catalogue Number: 30T
swt 1g arch mini 1/2w 10a
Colour: White Electric
Colour: Per UOM Std.
  • Black 1 PCE
  • Cream 1 PCE
  • White Electric 1 PCE
Added to cart


hide show
Range of product
Standard Series
Product brand
Device presentation
basic element with full cover plate
Switch function
  • 1-way
  • 2-way
    • Actuator
      Number of rocker
      Device mounting
      Fixing mode
      by screws
      Local signalling
      [Ue] rated operational voltage
      250 V AC
      Rated current
      10 A
      without marking
      Sustainable offer status
      Green Premium product
      REACh Regulation
      Reference contains Substances of Very High Concern above the threshold
      EU RoHS Directive
      Mercury free
      RoHS exemption information
      China RoHS Regulation
      Product out of China RoHS scope. Substance declaration for your information
      Environmental Disclosure
      Circularity Profile

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • CAD Files and Packs

      • Technical Data Catalogues

      • Installation Instruction

      • Product Environmental

      • Specifications

      • Case Studies

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      Do you have a 2 gang version of the 30T architrave switch?

      Yes, we do have a 2 gang version of the 30T architrave switch. The part number is 32TA.

      Is there a intermediate version of the 306 pull cord switch?

      No unfortunately this part is unavailable.

      Do we sell "miniature architrave switches"

      Yes we do. The product is from the standard series.
      1 Gang - 30T
      2 Gang - 32TA
      3 Gang - 33TA

      The measurements for these products are

      30T dimensions are 54mm (l) x 27mm (w) x 10mm (d).
      32TA dimensions are 75mm (l) x 27mm (w) x 10mm (d).
      33TA dimensions are 98mm (l) x 27mm (w) x 10mm (d).

      For further information, please visit

      User-added image


      Is the PDL 30A switched

       No it is not

      What is the blanking module for the Clipsal range

      Part code is 30P for the blanking module

      Is the Clipsal 30N 24v DC

      Yes the 30N24 is suitable for AC and DC loads

      According to data sheet of remote device, "Autonomy" is 16h. What is "Autonomy"?

      We speak about 30h of battery working time (autonomy) by continuous working.

      What is the wattage of the 30V lamp DL1BA030?

      What is the wattage of the 30V lamp DL1BA030?

      Product Line:
      Harmony Tower Lights

      All Products

      Product Features


      CTA-ID : 2017901

      Is there a 24V version of the 30N neon mechanism?

      Yes,  there is a 24V version of the 30N neon mechanism. The part number is a 30N24.
      Some of the key features are:
      • 24V
      • Suitable for DC loads
      • Fits 30 Mechanism series plates
      • Multiple colours available
      For further information please vist https://www.clipsal.com/Trade/Products/ProductDetail?catno=30N24


      What Grade of Steel is used for Metalplate?

      The BSL range uses Grade 304 Steel.

      Is 30m series mech available in colour 3A?

      Yes, the part number is 30M is a -3A.


      What is the part number for cat 5 cable in 305 mtr roll?

      The part number is 2D4P5IPV3B

      Please click this link for more information

      User-added image

      What do I need to put together a single phase 30A 56 Series RCD

      Use 56CB4 + A9R51240 40amp RCCB

      What is the -32T suffix?

      Legacy Circuit Breakers

      Circuit Breakers

      It indicates special ratings for Legacy breakers used in mining applications.


      SCP3xx Model 300 Processors Instruction Bulletin 30598-103-01

      Attached is the SCP3xx Model 300 Processors Instruction Bulletin 30598-103-01.

      Does Vijeo Designer Support the Rockwell Micrologix 850 controller?

      No, Vijeo Designer does not support the Rockwell Micrologix 850 controller.

      Is the Indicator neon mechanism 30N24 DC compatible ?

      Yes, the 30N series can be used on either AC or DC voltages.

      What is part number for Neon indicator in white?

      Part 30N is not available in White

      The standard colours are Transparent,Green,Red,Blue & Amber.

      Is there a 30M sensor?

      No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.

      Is 30M available marked SPA?

      Yes, part number is available as standard 30MSPA

      for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=30MSPA

      What is the part code for a CBUS 30M wall switch (master)

       The part code is 5031NMML

      What is the part number for 30M for 3 way installation?

      The part number for 30M for 3 way installation is 30MI.
      Please click this link for further information

      Does Clipsal manufacture a momentary ceiling switch?

      Unfortunately not. We do not have momentary ceiling switch. We have latching ceiling switches, part numbers below
      343-BR or 343-WE is 2 way 10A
      342-BR or 342-WE is 1 way 10A

      The 302 is no longer available

      What version of Colour Touchscreen do i have?

      You can confirm the version of the Colour Touchscreen you have by checking the pin configuration on the Colour Touchscreen's power supply

      5000CTC V1 - 50xxCTC -  4 pin power supply - 5000CTCPS - 5VDC 30W 1.5A 90-264VAC 50/60Hz
      5000CTC V2 - 50xxCTC2 - 7 pin power supply - 5000CTCPS/2 - 5VDC 30W 1.5A 90-264VAC 50/60Hz
      5000CTC V3 - 50xxCTC3 - 2 pin power supply (green phoenix connectors) - 5100P24/2700AU - 24VDC 65W 2.7A 100-240VAC 50/60Hz

      How many watt is the batten lamp holder 530T capable of?

      The batten lamp holder 530T is capable of up 230W.
      Some of its key features are:
      • 250V
      • With built-in fastening Ppugs and screws
      • Easily removable cover by 120 deg rotation and visual indicators
      • Front access to terminal slots allowing easy adjustment of terminals, even after installation
      • Built-in safety feature to ensure removable cover does not fall onto globe
      • Protection against accidental finger access to terminal slots
      • No exposed, unsightly mounting screwheads
      • AS 1939-1991 standard
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=530T


      What is the impedance of the analog input AI1 on the ATV312?

      Analog input one impedance of the ATV312

      Product Line:

      All models and serial numbers


      The impedance of AI1 on the ATV312 is 30K ohms

      Do you do a 56/32 with one spot for a 30 mech not two?

      No unfortunately we dont make that part you would need to place a 30P to fill one of the holes.

      What is part no for blank module to suit Saturn Zen

      Unfortunately there is no blanking module available

      for Saturn Zen can use 30P however colour likely to be different

      Support on Buildings Management Systems and Pelco Security Solutions

       For support on Buildings Management Systems and Pelco Security Solutions please visit:  https://buildingskb.schneider-electric.com/

      Explanation of circuit breakers in 30 amp rPDU's

      Product Line
      • Rack Power Distribution
        • AP7XXX, AP7XXXB, AP8XXX series

      • All serial numbers

      Circuit breakers are in place to protect the branch circuit and its conductors. With respect to a 30A breaker, all components employed in the circuit (downstream from the circuit breaker) shall be rated for 30A use. In a scenario where a 30A circuit breaker is providing power to a 20A rated outlet, the outlet, load plug, load cord and load are rated for 20A use, thus sized for this rating. In this scenario there is inadequate protection for the outlet and all connected equipment, and potentially (and most harmfully) the conductor that is supplying the outlets themselves.

      In North America, Canada, and Europe, PDU's are evaluated under UL/CSA/EN/IEC 60950-1. This standard requires circuit breaker protection when the rating of an output is less than the rating of the input. A PDU with a 30A input plug and 20A receptacles must have circuit breakers. Section 2.7 of the 60950 standard states: "Protective devices necessary to comply with the requirements of 5.3* must be included as part of the equipment" 

      *5.3 is the evaluation of abnormal operating and fault conditions.

      In North America, the requirement is based on NFPA 70, the National Electrical Code. In general, in the United States, you can have any outlet rated less than 20A protected by a 20A breaker. However, these outlets must have protection rated no less than the outlet rating and no more than 20A. A 30A outlet must be protected by a 30A breaker and may not have anything larger or smaller.

      Europe has very similar rules to North America. The main difference is the rating of receptacles and breakers. In Europe, you typically have 10A or 16A outlets protected by a 16A breaker, but the breaker rating can be no more than 16A.

      Canada places additional restrictions. In Canada, a 15A outlet must be protected by a 15A breaker. The only exception is the "T-Slot" 20A outlet that accepts either 15A or 20A plugs. This outlet may be protected at 20A.

      If a PDU has a 30A plug and 30A receptacles, it will not require and internal circuit breaker. The 30A plug forces it to be plugged into a 30A branch circuit, which will have its own 30A breaker. The PDU can then rely on the branch circuit's breaker rather than an internal breaker.

      If a PDU has a 30A plug and 20A receptacles, it must have internal 20A branch rated breakers for the receptacles. The 30A protection of the branch circuit is too high to be safe for the 20A outlets.

      How many Amps are the standard 30 mechanisms rated to?

      A standard 30M mechanism is rated at 10 Amps.
      Some key features are:
      • Terminal bores of 4.1 mm diameter accommodate 4 x 1.5 sq mm or 3 x 2.5 sq mm cable
      • Body fits 22 mm diameter hole
      • Motor rating is 100
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30M


      End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303


      End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303

      Product Line:



      NetBotz version 1 WallBotz 300, 300B and RackBotz 300 and 303

      End of Life, End of Support


      End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303

      The following NetBotz products will reach the end of their support life on January 31, 2005:
      WallBotz 300B
      WallBotz 300
      RackBotz 303
      RackBotz 300

      After that date, NetBotz may not take support calls or E-mails regarding these products. NetBotz also may not issue any further software releases or patches for these products after that date. 

      Please note that the Rack and wall versions of the 310 and 400 units are also end of support

      What is the part number for the standard 30M rocker mech with the red indicator mark on the top ?

      30MRD-WE (White)

      What is the part number for cat 6A shielded cable?

      The part number for the shielded 4 pair FUTP CAT6A LAN cable, LSZH, 305 metre reel is 2D4P6ALSF3R-BU.

      How much power does the led switch use?

      We do not have specific data on our led and neons.
      A generic led or neon of a simillar size would be approximatley 0.138 Watts.


      Are the clips on part no TPWPLED1 marine grade steel

      The clips for part no TPWPLED1 are not marine grade steel

      they are rated at 304 grade

      What is the part number for 30M with red dot on the dolly?

      The part number is 30MRD-WE.
      Please click this link for further information
      User-added image

      What is the part number for Prestige 30M with neon?

      The part number is P30NM

      Please click this link for further information https://www.clipsal.com/Trade/Products/ProductDetail?catno=P30NM

      User-added image

      Do you have a 20A mechanism marked heat in a 30M style mechanism?

      No. Unfortunately this would need to be done as a special and be quoted up by the quotes team.

      Is there a 30M labelled heat in 16A?

      Unfortunately, this part is unavailable. we only offer a 10A version. The part number for the 10A version is 30HM.


      MTBF for 499TWD01100 TwidoPort

      Goals and Symptoms

      This resolution provides MTBF of the 499TWD01100 Connexium TwidoPort Ethernet Interface for Twido controllers.

      Facts and Changes

      4,090,481 hours @ 30C GB

      Causes and Fixes

      This is a conservative estimated value.

      Legacy KB System (APS) Data: RESL181683 V1.0, Originally authored by WeDa on 01/19/2007, Last Edited by WeDa on 01/19/2007
      Related ranges: ConneXium - Ethernet

      Do you do a SC2025XA without the middle switch but has a blanking plate?

      No, this is not a standard item.
      Suggest you purchase a 2025XA remove the switch and put the blank 30P in there.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=SC2025XA

      Remote connection timeout in SoMachine

      What is the connection timeout in SoMachine and can we change it?

      Product Line:

      The remote connection timeout in SoMachine is fixed at 30s and there is no possibility to change it.

      Does Clipsal sell Cat6 cable suitable for underground application?

      No. Unfortunately, Clipsal does not have a Cat 6 cable suitable for underground application. Clipsal Cat6 cable 2D4P6IPV3B is suitable for above ground indoor horizontal LAN cabling situations. It is supplied in 305 metre box.
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2D4P6IPV3B
      User-added image

      How to wire SCADAPack 300 to Accutech BR10 MOD port for RS-485 communication?

      Use the connection diagram below to wire the Accutech BR10 Base Radio for your SCADAPack 300 (330, 334, 350, 357, ...).

      What is the part number for a 30M in Arctic Silver?

      The part number for a 30M in Arctic Silver is 30M-3A.

      Some of the key features are:

      • Terminal bores of 4.1 mm diameter accommodate 4 x 1.5 sq mm or 3 x 2.5 sq mm cable
      • Body fits 22 mm diameter hole
      • Motor rating is 100

      For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=30M


      What is the right way to connect and chain the MET 148, MSA 141, and DSM 303 accessories on the Sepam 20 or 40?

      Goals and Symptoms

      What is the right way to connect and chain the MET 148, MSA 141, and DSM 303 accessories on the Sepam 20 or 40?

      Causes and Fixes

      On the D Port you have to connect and chain in order:

      (1) MSA 141

      (2) MET 148 ( Attention: Option 2 MET 148 for Sepam 40 only )

      (3) DSM 303 (Always at the end of this chain and only if no more than 2 accessories already connected on Sepam)

      Note: you can't connect more 3 accessories on this chain so if you already have 1 MSA 141 and 2 MET 148 it is impossible to set also 1 DSM 303. In this case if you want to put this DSM 303, you have to remove the MSA 141 or 1 MET 148.

      Key words and phrases: MSA141, MET148, DSM303


      Legacy KB System (APS) Data: RESL201098 V1.0, Originally authored by DaMi on 01/22/2010, Last Edited by DaMi on 01/22/2010
      Related ranges: Sepam accessories, Sepam series 20, Sepam series 40

      Does Clipsal manufacture SS316 grade of ceiling sweep fans?

      Unfortunately not . We do not manufacture SS316 grade of ceiling sweep fans.
      We have ceiling sweep fans with 304 grade stainless steel blades. Features and benefits
      • Energy efficient
      • Three- or four-blade designs
      • 900mm (36”), 1200mm (48”) and 1400mm (56”) models
      • Metallic finish
      • Light adaptable
      • Three-speed fan wall switch
      • Top and bottom sealed bearings
      • Fan reverse switch
      • Pre-wired and partly assembled
      • 304 grade stainless steel blades
      • Electroplated body, shaft and cowlings
      • Three-year warranty

      Part numbers are as follows:

      What grade is the stainless steel used in Clipsal BSL cover plates?

      304 is the standard grade but we can get 316 as special.
      There is no set pricing for 316 grade plates, we need to get a quote from AU
      as it is a special and it will depend on the cost of the SS 316 
      at the time of manufacturing.

      Is the extra switch in the 2025XA two way compatible?

      Yes, it is a 30M mech and can be two way wired
      Show More