Yes the part number is 30MD2
Yes, the part number is 30MD20.
No You would need to use the 30MD mech in the Saturn 30 series plate.
The 30MD is available in White (WE), Black (BK)*, Red (RD)*, Chrome Shadow (3S)* and Soft Grey (SG)*.
*Please check with our customer care team for availability as these colours are purchased to order.
The part number 30MD into 4031VH to 4036VH plates.
No, unfortunately we only do a double pole switch in a standard switch mechanism.
For further information please visit
No. Unfortunately,the part number 30HDMI is not available in Black.
No unfortunately you will need to assemble one your self, using parts P2033/2VH, P30FM, P30HM, P30HM.
The 30M Series products have fluorescent capacity of approximately 5A
Both the 30MD and 30MI are not recommended for switching of multiple fluorescent fittings.
For further information please visit https://www.clipsal.com/Trade
Use a LV438575 - NSX100N 30Amp 1P 50kA breaker
Part codes which are available in 3S - 30M, 30USM, 30MI, 30MD, 30MBPR, 30M35, 32E450UDM, 32E450LM, 32E450TM
No - It is just a 2 pole switch
But a 30MD2 is a 2p 2way (6 terminals)
No, but you can use a 4031VH and a 30MD.
Yes, the 30PID
will fit in any plate that takes a 30 series mechanism.
Some of the key features are:
- For 30 series ID circuit plug
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PID
The Part number for the lens is a 30PID-2-CL
No. Our Draftstoppa only suits round exhaust fans up to 300mm diameter.
Yes, the part number for the category 6 shielded cable is, 2D4P6ALSF3R
(LAN Cable, 305m, Category 6, FUTP, LSZH, Blue).
For further information please visit https://www.clipsal.com/Trade/CAT6FUTP
B12/30/6 = 12-Gang Switch Plate. 2 rows of 6. Stainless steel. 303mm 120mm
12/30/162/3 = 12-Gang Switch Plate. 4 rows of 3. Stainless steel. 165mm 215mm
Includes stainless steel fascia with grid and wall box. Standard grid colours - White Electric (WE) and Black (BK).
You can use a Clipsal 7106A or 7108A both have a 230mm cut out and are 271mm square
Do we offer a flashing 24V pilot light in the 9001 30mm line? What is the part number for a Flashing amber 24 vdc pilot light 30mm?
30mm Push Buttons
9001K/SK light modules
Looking for a flashing pilot light.
This is not offered in the 30mm lines.
The maximum length of a DALI line is 300m (when using minimum 1.5mm cable). If there is a specific requirement to use a line length of over 300m, it is possible to use a device such as a DALI repeater. As this is not a DALI CONTROL product, a 3rd party device would need to be sourced
The minimum/maximum rated voltage on which Vigi C120 range can operate is as follows:
- For VigiC120 30mA - Minimum Voltage 196V / Maximum Voltage 456V
- For VigiC120 300mA - Minimum Voltage 189V / Maximum Voltage 456V
- For VigiC120 500mA - Minimum Voltage 175V / Maximum Voltage 456V
What is the VA rating of a 9001KM 120V LED light module?
Push Buttons and Operator Interface
30mm, 9001KM, 9001K, 9001SK
All 9001KM 120V LED: 9001KM38LR, 9001KM38LG, 9001KM38LY, 9001KM38LW, 9001KM38LL have a 1.4VA rating.
What is the parts break down of a 9001KYK116?
Pushbuttons and Operator Inteface
30mm, 9001KY/SKY Control Stations
9001KY1 - Enclosure
9001K15 - Emergency Break Glass Operator
9001KA1 - 1NO and 1NC Contact Block
9001KN799RP - Legend Plate (Special Marking)
Outdoor rating for 9001K key-operated selector switch
No. There are no boots or covers available either .
The following part number will suit CEDS1.
It will fit over fans of up to 300MM diameter
How is the IPR (motor power) parameter calculated?
In order to calculate and/or monitor motor power, need to consider the speed of the motor, Power factor and efficiency.
The Power Factor and Efficiency drop at lower speeds.
Here are a couple of examples/calculations:
AH3 at 60hz: 96A x 460Vx sqrt(3) x 0.7(PF &Eff) = 53.54 kW
AH3 at 30hz: 35A x 230V x sqrt(3) x 0.43(PF & Eff) = 6.0 kW
Accuracy is about 10%
How is the definition of "LFF" in Fault menu? How is the effect if loss of 4~20mA and "LFF" is also adjusted to 30Hz?
The fault value of is parameter is 0, if you change it, sample 30 Hz in case of loss of 4-20 mA the motor will run at 30 Hz.
Legacy KB System (APS) Data: RESL156361 V3.0, Originally authored by on , Last Edited by on
Related ranges: Altivar 38
Can I upgrade an E-Flex to a larger drive size by changing the ATV61 drive?
Can I change drive from an 25hp to a 30hp, for a 30hp rating?
No, not recommended. The E-Flex is designed for the horsepower rating it was order for.
Other E-Flex components and certifications must be considered. This would include wire size, breaker size, contactors (if bypass).
This could void the warranty and the UL listing.
The part number for an exhaust fan about 330mm cutout is 6230-0.
Some of the key features are:
- Axial fan
- Twist lock grille
- Grille is able to be easily removed for cleaning
- Fly-proof grille to keep out insects
- Fitted with plug and lead
- High performance motors
- 380 mm overall intake
- 330 mm diameter duct
- 330 mm diameter hole
- 1090 mm Plug and lead length
- 4 Blades
- 1 speed
- Sleeve bearing motor
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=6230-0
What is the recommended spacing for 22mm pushbuttons ?
Horizontal spacing is 1.18`` or 30mm, vertical spacing is 1.57`` or 40mm, hole size 0.88`` ( recommended 0.89`` ) or 22.5mm
Does Square D offer a 30mm pusbutton turn to release Emergency Stop with trigger-action?
30mm Push Buttons
9001 Type K and SK Heavy Duty Operators
Clarify that Schneider Electric offers a trigger-action Emergency Stop.
The newly introduced 9001KR16 and 9001SKR16 Harmony 30mm Turn-to-Release includes the trigger-action feature.
What does the 9001SKY302 consist of?
The 9001SKY302 consists of:
(1) 9001SKY3 enclosure, ((2) 9001SKR1B operators, (1) 9001SKR3R operator, (2) 9001KA1 contact blocks, (1) 9001KA3 contact block, (1) 9001KN111WP UP legend plate, (1) 9001KN110WP DOWN legend plate, and (1) 9001KN102RP STOP legend plate.
CTA-ID : 2061576