The part code is VDIB17735U however this part is no longer available
Now use the cat6 VDIB17736UWE shuttered socket 30 Series.
Any 30 series mechanism will fit into the range of 4031vh -4036vh Saturn plates.
Any 30 series mech WILL NOT fit into part number 4025XA. They are designed to accommodate 60R mechs only.
Yes the part number for a double pole, double throw 30 mechanism is a 30MD2.
The part number for 30 series surge protection mech is a 30SFM.
The 30 series mech can be marked Pool it is not a standard part number requires specific printing.
You can use a Clipsal 31JSCREW to secure the mech from behind. Screws are sold individually.
The 30M-D/WASHER is available in white only, a 30M-BK will need to be engraved
Yes, would need to be unassembled & made up with a 30 series mech
30PBI is the 30 series intermediate mechanism. This does not have an LED indicator.
WS229VH is the enclosure only of the WS229 which takes 30 series mechs
30USBCM (comes with white cap) + USBC-CAPS-BK (comes with 5x black caps)
Yes the part number is 31E2PUDM-WE
Yes, we do have Audio Visual connectors in 30 mech style bezels. The part number is 30FAVRWY.
No, the largest rated 30 series double pole switch mechanism is 20A.
No unfortunately this part is unavailable.
The part number is 30MI-RD
NO we do not manufacture USB non-charging mech.
No Clipsal do not have a split switch.
The part number for 30 pair underground phone cable is 2T30POJPP4.
No.Unfortunately, there is not.
No, we do not, but we do have Cat6A - 30RJ45SMA6AF.
Part number is VDIB17735UWE
Yes there is, part code 30MD-RD
The part number for the adapter that lets 30 series mecs fit in a Prestige switch is P30Z.
No, unfortunately we don't have a 3 position spring return switch in 30 series.
For further information please visit https://www.clipsal.com/trade
Part no 56/32 has IP66 rating and can be used for
30 series mechs
The part number 4032VH will accommodate any 30 series mech.
The part number for a 30 series intermediate push button switch mech is - 30PBI
No, unfortunately there isn't an adapter so you can fit 30 series mechanisms into a PDL 600 series plate.
The part number for a terminal block with grommet in a 30 mechanism is a 38TB.
The part number for insulating shroud to suit 30 series mechs is a 90F.
Yes the part number for a non latching, momentary press push button in the 30 series is a 30PBBP.
Part number 4033VH will accommodate 30 series mechs.
No, there is not an adaptor to fit 30 series mechanisms into Iconic switch plates as Iconic has the full range of switches and mechanisms.
For further information please visit https://www.clipsal.com/iconic