clip conduit hft 20mm

Conduit Clip, PVC, 20mm

Catalogue Number: 280HF20
clip conduit hft 20mm
RRP (Inc. GST)
Colour Black (BK)
  • Black 1 PCE


hide show
Product brand
Range of product
Series 280
20 mm
PVC (polyvinyl chloride)
Sheath material
Environmental characteristic
  • halogen free
  • fire resistance
    • Unit Type of Package 1
      Number of Units in Package 1
      Package 1 Weight
      4 g
      Package 1 Height
      12 mm
      Package 1 width
      28 mm
      Package 1 Length
      29 mm
      REACh free of SVHC
      EU RoHS Directive
      Pro-active compliance (Product out of EU RoHS legal scope)
      Toxic heavy metal free
      Mercury free
      RoHS exemption information
      China RoHS Regulation
       Pro-active China RoHS declaration (out of China RoHS legal scope)

      Frequently Asked Questions

      hide show

      Are the Clipsal Conduit Clips available in Electric Orange?

      No, they are only available in grey.

      This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

      What is the part number for an inspection elbow to suit 9020HF20-BK?

      The part number for an inspection elbow to suit the 9020HF20-BK is 244HF20-BK.

      What is the part number for inspection tee to suit 9020HF20-BK?

      246HF20-BK is the part number for inspection tee to suit 9020HF20-BK.

      Where can people purchase Stab-Lok breakers?

      Are Federal Pioneer / Federal Pacific Stab-Lok breakers available? 

      Product Line:
      Moulded Case Breakers


      FP Product Availability

      Contact American Circuit Breaker Corporation (ACB) at 704-463-7361 as they are the exclusive distributor of the Stab-Lok breaker.

      Who provides support for Class 9045 Type BG Magnetic Unloader products?

      Replacement for a defective magnetic unloader

      Product Line:
      Pressure, Float and Limit switches

      Pressure Switches

      Support for obsolete pressure switch  

      The 9045 BG Magnetic unloaders were electrically activated relief valves used to relieve head pressure on compressors. These devices have been obsolete for several years with no replacement. Users should contact the compressor OEM for suggested replacement.

      How do I hardwire 10kva and 20kva transformers in a 208/120 or 240/120 environment

      Implementing a hardwire stepdown transformer in a 208v or 240v environment

      Product Line:

      Smart-UPS / Symmetra


      APTF10KT01, APTF10KW01, and APTF20KW01, All Serial Numbers


      Unbalanced UPS outputs require a stepdown transformer to power 120v loads


      This document refers to installing  the APTF10KT01, APTF10KW01, and APTF20KW01 transformers in a North American 120/240 or 120/208 environment. For installations in other regions please consult the users manual.

      The wiring block outputs are as follows:

      For domestic use, make sure that the Terminal Block Jumper is installed between the Ground Terminal and Terminal 8 on the output wiring block, as illustrated on page 8 of the user manual. Please also make sure that the input voltage switch is in the correct position.

      The step-down transformer provides 240/120 output as 2 120v hots, a neutral, and a ground. It provides 208v output as a 120v hot, an 88v hot, and a ground. The 120v hot (terminal  7) and the 88v hot (terminal 9) are 180 degrees out of phase. You will measure 208v from terminals 7 to 9. The step-down transformer is not able to provide 2 120v hots that are 120 degrees out of phase as you would see with utility power.

       Note: If your installation requires both 208v and 120v output power you will need 2 separate subpanels: a 240v/120v panel and a dedicated 208v subpanel.

      NetBotz UI slow when viewing Pelco image


      Viewing a Pelco camera image in the NetBotz Advanced View or the web UI causes a performance issue on the NetBotz appliance.

      Product Line:

      NetBotz 4.x
      NetBotz Advanced View
      NetBotz web UI
      Supported Pelco Cameras

      Viewing a Pelco camera image in the NetBotz Advanced View or the web UI using any resolution other than the resolution that matches the setting on the Pelco camera causes a performance issue on the NetBotz appliance.

      The NetBotz appliance must use more processing power to re-size the image when you view the image with mismatched settings.

      The Pelco camera resolution is set to 1280x720.
      When you view the image at 1280x720 in the Advanced View or the web UI, there are no noticeable performance issues.
      When you view the image at 320x240 in the Advanced View or the web UI, the interface responsiveness becomes very slow.

      Make sure the resolution set in the Advanced View or web UI matches the resolution set on the Pelco camera.

      What are Metering Units?


      Metering Units represent the secondary values for the current and voltage transformers. That is Metering Units are the values present at the voltage and current inputs at the back of the meter.
      As an example, if the PTs (voltage transformers) have a ratio of 480:120 and the CTs (current transformer) have a ratio of 300:5; and you were injecting full secondary values (120 Vl-l and 5 A) for all three phases you would see the the following values:

      kw A = 120 V * 5 A = 600 W = 0.600 kW
      kw B = 120 V * 5 A = 600 W = 0.600 kW
      kw C = 120 V * 5 A = 600 W = 0.600 kW
      kw total = 0.600 kw + 0.600 kw + 0.600 kw = 1.80 kw

      *note: these calculation assume a unity power factor
      *note: Metering Units can sometimes be referred to as "uncompensated" or "unscaled" values.

      Last Revised: October 3, 2012
      All content © 1992-2012 Schneider Electric

      Legacy KB System (APS) Data: RESL188299 V3.0, Originally authored by KBAdPM on 10/04/2007, Last Edited by MaTh on 10/10/2012
      Related ranges: ION8800, ION8600, ION7550/ION7650, ION7300

      EM4900 Installation: Using Voltage/Potential Transformers

      User may need to use PTs when installing the EM4900 series meters and may not know that they do NOT have the option to program PT ratios in their configurations.

      Product Line


      BCPM and EM4900 series meters do not have the option to program PT ratios in their configurations.

      The user may use PTs to step down the input control power and measurement voltages as required, but will need to compensate for the ratios when reading the meter's outputs, in the case of the measurement voltages.
      For example, if a PT of ratio 480:120 is used, one will need to multiply all the output values, with the exception of the current, by a factor of 4.

      Kindly refer to the link below for the EM4900 series documentation: