Frequently Asked Questions
266MD20 - for 20mm medium duty conduit.
266MD25 - for 25mm medium duty conduit.
[Auto/man speed ref] Auto/Manual Speed Reference Switching 0
Switching between two speed reference sources by means of a logic input is enabled if parameter F200 is set to 0.
To use this function, you need to assign a logic input to function 38, Auto/Man speed ref.
When the assigned logic input is off, the drive will follow the speed reference source defined by parameter [Frequency mode sel]
When the assigned logic input is on, the drive will follow the speed reference source defined by parameter [Remote spd ref 2]
When parameter F200 is set to 1, the drive will follow the FMOd speed reference source when it is operating above 1 Hz.
Below 1 Hz, it will follow the F207 speed reference source
CTA-ID : 2062816
Powering the ATV312 by an external 24V only
External 24v supply
No, this drive must have line voltage applied. The voltage must be within -15% to +10% of the rated line voltage.