clip earth 16mm

Cable Management Pressed Metal Conduit Fittings, Conduit Size Earth Clip 16MM

Catalogue Number: 206M
clip earth 16mm
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

Is part number 209M available in Stainless Steel?

The part number 209M is not available in Stainless.

What would be the part number for an Earth Clip, 16/20 mm.

203M.
Pressed Metal Conduit Fittings, Earth Clips, Water pipe adjustable earth clip 15 - 20mm or 1/2 - 3/4 inch.
Please see following link under the documentation tab for full catalogue.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=203M

What is the dimensions of a PDL ME9

Dimensions are 190w x 206h x 102d

What is the dimensions for a PDL ME12

 Dimensions 272w x 206h x 102d Please note this product has been obsoleted

What are the dimensions of the PDLME12?

272W x 206H x 102D mm

What is the part number of an hot dip galvanized earth clip to suit 3/4" conduit?

207M is a hot dip galvanized earth clip to suit 3/4"  or 20mm conduit. 

For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=207M


 

What are the dimensions of the 4CC9-WE?

The dimensions of the 4CC9 are 178mm Wide, 206mm High and 104mm Deep.

What is the part number for a 20mm conduit cap?

The part number for a 20mm conduit cap is- 262/20

 

What is part number for 20mm HFT corrugated conduit?

The part number for 20mm HFT corrugated conduitart is 9020CHF.

What are the dimensions for part number LC1F330U7?

The dimensions for part number LC1F330U7 are:
206mm (H) x 213mm (W) x 219mm (D)

 

Do you have a cap/ flange to for 20mm conduit?

Yes the part number is 221/20

What is the part number for a 20mm steel conduit plug?

The part number  for a 20mm brass plug for steel conduit is 1220S20.

What is part number for 20mm HFT coupling?

The part number is a - 242HF20-BK




 

What is the part number for a 20mm steel coupling?

The part number for a 20mm steel coupling is 1242S20
Machined Brass and Steel Fittings, Steel Couplings, 20mm Steel coupling - zinc plated
For more information on this product please visit the Clipsal website on the link provided
https://www.clipsal.com/Trade/Products/ProductDetail?catno=1242S20

What is the part number of the reducer supplied with Weathershield isolators, 25mm plain, external, to 20mm threaded ,internal reducer?

The part number of the reducer supplied with weathershield isolators, 25mm plain, external, to 20mm threaded ,internal reducer is 222/2M-GY.

What is the part number for steel 20mm lockrings?

The part number for the 20mm steel lock rings is - 1259S20

For further information , please visit link below:-
https://www.clipsal.com/Trade/search-results?q=1259S20
User-added image

What is the part number for spacer for the 20mm saddles?

The part number for spacer for the 20mm saddles is - 261E20

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=261E20
User-added image

What is part number for Galv h/d 20mm junction box?

Part number not available in 20mm but its only available in 25mm and the part number is a 1240H25/2.
for more information on this part refer https://www.clipsal.com/Trade/Products/ProductDetail?catno=1240H25/2

User-added image

What is the part number for the Halogen free 20mm conduit?

The part number for the Halogen free 20mm conduit is - 9020HF

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=9020HF
User-added image

What is the part number for 20mm sheathed corrugated conduit?

The part number for 20mm sheathed corrugated conduit is - 9020CMS

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=9020CMS
User-added image

What is the part number for a 20mm 2 way conduit J-Box?

The part number for a 20mm 2 way conduit J-Box is - 240/20/2

For further information , visit link below;-
https://www.clipsal.com/Trade/search-results?q=240/20/2
User-added image

What is part number for 20mm brass barrel union?

The part number for 20mm brass barrel union is a 1242BU20

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=1242BU20

User-added image

Can you buy a 20m 954 camper set

You can purchase a 955RW, BALS211 + 56CR310 + flex

What is the part number for the 20mm double sided saddle that is Hot Dip Galvanised?

The part number for the 20mm double sided saddle that is Hot Dip Galvanised is - 172HDGM

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=172HDGM

User-added image

What is the part numbers for the 20mm & 25mm stainless steel saddles?

The part numbers for the 20mm & 25mm stainless steel saddles is - 172SS & 173SS.

For further information , visit links below:-
https://www.clipsal.com/Trade/search-results?q=172SS
https://www.clipsal.com/Trade/search-results?q=173SS
User-added image

What is the part number for a metal conduit J-Box with 1 x 20mm entry?

The part number for a metal conduit J-Box with 1 x 20mm entry is - 1239/20/1

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=1239/20/1
User-added image

What is the part number of the adaptor that can be used for 25 x16mm ducting to 20mm conduit?

900/25/16CA is the adaptor that can be used for 25 x16mm ducting to 20mm conduit.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=900/25/16CA
 

What is the part number for a conduit black HFT 20mm

Part number is 9020CHF, this is no longer available in NZ

What is the part number for a conduit bending spring

266MD20 - for 20mm medium duty conduit.
266MD25 - for 25mm medium duty conduit.

What code is an alternative for XCSE7341?

The only difference with the XCSE7342 is the cable entry is 20mm

What is the part code for a Harmony Stop Plug in 30mm

No longer available use 30-20mm adaptor and 20mm plug

What would be the adaptor for 25 x 16mm ducting to 20mm conduit.

The adaptor is a 900/25/16CA-WE, This suits the 25x16mm plastic mini ducting to convert to a 20mm conduit.
This only comes in white
Please see link for more conduit and mini ducting requirements.
https://updates.clipsal.com/ClipsalOnline/Files/Brochures/CMS0003.pdf

Do you have 20mm conduit clips in stainless steel?

No, unfortunately there is no stainless steel conduit clip. Only the full saddles are available in stainless steel.

For further information please visit https://www.clipsal.com/Trade

What is the part code for a latching trip wire switch with 1N/C + 1 N/O contact?

XY2CJS15H29 will suit up to 20m operating cable length.

How do we do an outside temperature sensor in CBus

You will need to use a temperature coupler in the board and a temperature probe outside. Up to 20m limit.

What is a ZCDEP20?

It is a metal 20mm cable gland entry to fit the ZCMD** limit switch body.
There is also a 16mm option ZCDEP16.

What components make up a XCKD2145P16?

 ZCD21 + ZCDEP16 + ZCE01 + ZCY45 = XCKD2145P16
The ZCDEP16 is the 16mm cable entry, the ZCDEP20 can be substituted if a 20mm cable entry is more suitable.

What would be a longer screw to suit Clipsals round j-boxes (Junction Boxes)?

The part number would be 248/20 which is a combination screw head 20MM 3/16 BSW.

what is the part number for an inspection elbow to suit 20mm HFT conduit ?

The part number is 244HF20-BK

Is the 20mm blanking plug for PDL 56E1/20/20 available as a spare part ?

The code for the threaded blanks is PDL56PLUG20GY

NetBotz Central 2.x and InfraStruXure Central Support OpenLDAP and Active Directory

Issue:

NetBotz Central 2.x and InfraStruXure Central Support OpenLDAP and Active Directory

Product Line:

NetBotz Central 
InfraStruxure Central
StruxureWare Data Center Expert

Environment:

NetBotz Central version 2
InfraStruxure Central all versions 
StruxureWare Data Center Expert servers, all versions

Cause:

Alternative authentication options

Resolution:

NetBotz Central 2.x and InfraStruXure(ISX) Central support Active Directory or OpenLDAP integration for user profile management. The Active Directory and OpenLDAP integration allows NetBotz/ISX Central to utilize the power of centralized profile management and centralized user IDs and passwords. Users added using this manner do not inherit any rights from the LDAP or AD server, rights Within the ISXC or DCE server are assigned within the local server's user management section

What is the cable entry for a LE1M35U705

2 x 13mm PG at bottom and top
2 x 20mm ISO at bottom and top
2 x 21mm PG at bottom and top
2 x 25mm ISO at bottom and top

What are the dimensions of the SC2025 behind the plate ?

The SC2025 protrudes 20mm from the rear of the plate, Allow minimum 10mm for cabling behind the plate.

What is the replacement for a XCKJ5910H7?

The replcaement for this Safety switch would be a XCSB702 which was the superceeded again by the XCSB702.
The Main difference is that the XCSB702 has a 20mm thread as apose to the half inch thread.

Can 56JB1SWA take metal glands?

56JB1SWA has 3 entries, all of which are suitable for any metal gland (especially glands for SWA cables) that have a 20mm thread.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56JB1SWA

Which type of switch should be used for the RemoteTest/Hush feature on the 755PSMA2 Smoke alarm?

Any 240V momentary switch, such as a 30MBP Bell Press Switch can be wired to either of the two new mounting bases 755RB or 755RFB up to 20m away. A relay can also be pulsed on momentarily via a security or home automation panel to activate the test/hush function. 

Which firewall ports are required to be open in order to establish a KVM over IP connection with the AP561X series of KVM switches?


 
Issue

Which firewall ports are required to be open in order to establish a KVM over IP connection with the AP561X series of KVM switches?


Product Line
  • Rack Accessories - KVM Switches
    • AP5610
    • AP5615
    • AP5616
       

Environment

  • All firmware versions
  • All serial numbers


Cause

Firewall ports must be open in order for the KVM viewer to function properly.


Resolution


The Video Session Viewer on the AP56XX line of APC's KVM switches communicates with the KVM over TCP ports 8192 and 2068. Digitized video data is sent over port 8192. Encrypted keyboard and mouse data is sent over port 2068. The Management Panel (MP) communicates with the KVM switch over TCP/UDP port 3211. All data on ports 2068 and 3211 is encrypted using the Secure Socket Layer (SSL) protocol. The KVM switch retains the database of user accounts and permissions. The Viewer performs user authentication over encrypted port 2068. The MP performs user authentication over encrypted port 3211.



 





 

What is the difference between the 56E1 and the 56E1/20/20 or the 56E1/25/25?

The entries on the three enclosures are different. The 56E1/20/20 has two 20mm entries on the top and one 25mm entry on the bottom, the 56E1/25/25 has two 25mm entries on the top and one 32mm entry on the bottom and the 56E1 has one 32mm entry on top and one 25mm entry on the bottom.
 

What is the part no for a round junction box in Brass?

Part no is BJB204 - it is 20mm with 4 entries.
this is the link https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=BJB204&c=1&ms=5&mg=348&g=3485018

Or BJB254 - it is 25mm with 4 entries.
this is the link https://www.clipsal.com/Trade/Products/ProductDetail?catno=BJB254

User-added image

What is the part number for a screwed converter , to go from 3/4 inch to 20mm?

The part number for a screwed converter , to go from 3/4 inch to 20mm is - 235S3/4/20

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=235S3/4/20
User-added image
Show More