clip earth adjust 15/20mm

Cable Management Pressed Metal Conduit, Pipe Adjustable Earth Clip 15 - 20mm

Catalogue Number: 203M
clip earth adjust 15/20mm
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What would be the part number for an Earth Clip, 16/20 mm.

203M.
Pressed Metal Conduit Fittings, Earth Clips, Water pipe adjustable earth clip 15 - 20mm or 1/2 - 3/4 inch.
Please see following link under the documentation tab for full catalogue.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=203M

Is part number 209M available in Stainless Steel?

The part number 209M is not available in Stainless.

Plate for 2031

Clipsal 2000-we

Is there a mounting bracket for 2033 architrave switch?

There is not one available.

Vijeo Designer and Vijeo XD Runtime year 2038 limitation

Since Vijeo Designer and Vijeo XD Runtime are currently both 32-Bit applications, they both will be affected by the year 2038 problem. That is, the date and time that the HMI can hold can only be upto the year 2038.

 

What is the part number of an hot dip galvanized earth clip to suit 3/4" conduit?

207M is a hot dip galvanized earth clip to suit 3/4"  or 20mm conduit. 

For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=207M


 

Need a version of an XX930A1A1M12 sensor with a 2 metre range

Use a XX930A3A1M12 sensor. The range is adjustable between 203mm - 8m (use XXZPB100 to teach the sensor)

What is the part number for a mounting block for the 2030 , 1 gang architrave switch?

The part number for a mounting block for the 2030 , 1 gang architrave switch is - 70/1

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=70/1
User-added image

What is the part number for a 20mm conduit cap?

The part number for a 20mm conduit cap is- 262/20

 

What is part number for 20mm HFT corrugated conduit?

The part number for 20mm HFT corrugated conduitart is 9020CHF.

What is the part number for surround to suit 2030?

The surround to suit 2030 architrave is part number 2001.

Some of the key features are:
  • 1 gang
  • Architrave
  • Curved side

For further information please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2001

 

Do you have a cap/ flange to for 20mm conduit?

Yes the part number is 221/20

What is the part number for a 20mm steel conduit plug?

The part number  for a 20mm brass plug for steel conduit is 1220S20.

What is part number for 20mm HFT coupling?

The part number is a - 242HF20-BK




 

What is the part number for a 20mm steel coupling?

The part number for a 20mm steel coupling is 1242S20
Machined Brass and Steel Fittings, Steel Couplings, 20mm Steel coupling - zinc plated
For more information on this product please visit the Clipsal website on the link provided
https://www.clipsal.com/Trade/Products/ProductDetail?catno=1242S20

What is the part number of the reducer supplied with Weathershield isolators, 25mm plain, external, to 20mm threaded ,internal reducer?

The part number of the reducer supplied with weathershield isolators, 25mm plain, external, to 20mm threaded ,internal reducer is 222/2M-GY.

What is the part number for steel 20mm lockrings?

The part number for the 20mm steel lock rings is - 1259S20

For further information , please visit link below:-
https://www.clipsal.com/Trade/search-results?q=1259S20
User-added image

What is the part number for spacer for the 20mm saddles?

The part number for spacer for the 20mm saddles is - 261E20

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=261E20
User-added image

What is part number for Galv h/d 20mm junction box?

Part number not available in 20mm but its only available in 25mm and the part number is a 1240H25/2.
for more information on this part refer https://www.clipsal.com/Trade/Products/ProductDetail?catno=1240H25/2

User-added image

What is the part number for the Halogen free 20mm conduit?

The part number for the Halogen free 20mm conduit is - 9020HF

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=9020HF
User-added image

What is the part number for 20mm sheathed corrugated conduit?

The part number for 20mm sheathed corrugated conduit is - 9020CMS

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=9020CMS
User-added image

What is the part number for a 20mm 2 way conduit J-Box?

The part number for a 20mm 2 way conduit J-Box is - 240/20/2

For further information , visit link below;-
https://www.clipsal.com/Trade/search-results?q=240/20/2
User-added image

What is part number for 20mm brass barrel union?

The part number for 20mm brass barrel union is a 1242BU20

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=1242BU20

User-added image

Can you buy a 20m 954 camper set

You can purchase a 955RW, BALS211 + 56CR310 + flex

False Events When Using A SEL 2020/2030 and ION Enterprise

Goals and Symptoms

Summary

SEL 2030 devices are used to communicate with Schweitzer Engineering Laboratories (SEL) relays. The relays only communicate with SEL proprietary protocol. The 2030 can convert this to Modbus for the use of PRODUCTS such as ION Enterprise 5.0.
We use the name SEL 2030 but this article also applies to other modules in this product family including the SEL 2020 and SEL 2032.

ION Enterprise 5.0 is configured to translate the Modbus data into the ION network. Within this network a Virtual ION Processor (VIP) can be used to perform logical actions based on the information obtained from the relay.

One common action is to detect a change in state of a Boolean value. A series of VIP Setpoint modules can be configured to monitor the state of each value.  When the state changes the VIP Setpoint module records an event but can also be used to trigger an action.

Symptoms

The VIP Setpoint module shows repeated events without an actual change in the relay state.  This may always appear as an OFF event.

Causes and Fixes

Cause

The ION Enterprise Modbus master repeatedly asks the SEL 2030 for updates.  If the SEL 2030 is providing the data directly from the port which the relay is attached to (as opposed to the port the master is attached to) then the SEL 2030 will randomly reply with Modbus exceptions. These happen when the incoming request happens at the same time as the relay is updating its information in the SEL 2030.

These Modbus exceptions may cause a VIP Setpoint module to incorrectly register an event.

Workaround

There are two ways to work around this problem.

On newer SEL 2030 devices the master port can be configured to not send exceptions when it is busy. In the port set-up configure the "BUSY_DIS" setting to "Yes" from the default "No"

On all SEL 2030 devices you can use Memory Move commands to remap the individual relay's data into the memory used by the Modbus master. 

Attachments

 

  • (Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/dc5af2e8c4694664c125765d001625da/fl_block_5/0.1AF2?OpenElement&FieldElemFormat=gif)

    Original article#10181

    All content © 1992-2007 Schneider Electric


Legacy KB System (APS) Data: RESL186793 V2.0, Originally authored by KBAdPM on 07/10/2007, Last Edited by DaMi on 10/28/2009
Related ranges: VIP, ION Enterprise V5.0, Modbus / JBus

What is the part numbers for a 2000 series architrave switch with double pole switch mech?

The part numbers for a 2000 series architrave switch with double pole switch mech is - 2031 & 30MD

For further information , visit links  below:-
https://www.clipsal.com/Trade/search-results?q=2031
https://www.clipsal.com/Trade/search-results?q=30MD
 

What is the part number for the 20mm double sided saddle that is Hot Dip Galvanised?

The part number for the 20mm double sided saddle that is Hot Dip Galvanised is - 172HDGM

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=172HDGM

User-added image

What is the part numbers for the 20mm & 25mm stainless steel saddles?

The part numbers for the 20mm & 25mm stainless steel saddles is - 172SS & 173SS.

For further information , visit links below:-
https://www.clipsal.com/Trade/search-results?q=172SS
https://www.clipsal.com/Trade/search-results?q=173SS
User-added image

What is the part number for a metal conduit J-Box with 1 x 20mm entry?

The part number for a metal conduit J-Box with 1 x 20mm entry is - 1239/20/1

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=1239/20/1
User-added image

What is the part number of the adaptor that can be used for 25 x16mm ducting to 20mm conduit?

900/25/16CA is the adaptor that can be used for 25 x16mm ducting to 20mm conduit.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=900/25/16CA
 

What is the part number for a conduit black HFT 20mm

Part number is 9020CHF, this is no longer available in NZ

What is the part number for a conduit bending spring

266MD20 - for 20mm medium duty conduit.
266MD25 - for 25mm medium duty conduit.

What code is an alternative for XCSE7341?

The only difference with the XCSE7342 is the cable entry is 20mm

What is the part code for a Harmony Stop Plug in 30mm

No longer available use 30-20mm adaptor and 20mm plug

What would be the adaptor for 25 x 16mm ducting to 20mm conduit.

The adaptor is a 900/25/16CA-WE, This suits the 25x16mm plastic mini ducting to convert to a 20mm conduit.
This only comes in white
Please see link for more conduit and mini ducting requirements.
https://updates.clipsal.com/ClipsalOnline/Files/Brochures/CMS0003.pdf

Do you have 20mm conduit clips in stainless steel?

No, unfortunately there is no stainless steel conduit clip. Only the full saddles are available in stainless steel.

For further information please visit https://www.clipsal.com/Trade

What would be the part number for an rcd (Residual Current Device) in the Medilec range to suit a 1 gang switch?

The part number is a  ML2031RC10-WE which is a standard size switch with rcd incorporated in it.
This is a 10milli amp device specifically designed for medical installations.

Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.

What is the part code for a latching trip wire switch with 1N/C + 1 N/O contact?

XY2CJS15H29 will suit up to 20m operating cable length.

How do we do an outside temperature sensor in CBus

You will need to use a temperature coupler in the board and a temperature probe outside. Up to 20m limit.

What is a ZCDEP20?

It is a metal 20mm cable gland entry to fit the ZCMD** limit switch body.
There is also a 16mm option ZCDEP16.

What components make up a XCKD2145P16?

 ZCD21 + ZCDEP16 + ZCE01 + ZCY45 = XCKD2145P16
The ZCDEP16 is the 16mm cable entry, the ZCDEP20 can be substituted if a 20mm cable entry is more suitable.

What would be a longer screw to suit Clipsals round j-boxes (Junction Boxes)?

The part number would be 248/20 which is a combination screw head 20MM 3/16 BSW.

what is the part number for an inspection elbow to suit 20mm HFT conduit ?

The part number is 244HF20-BK

Is the 20mm blanking plug for PDL 56E1/20/20 available as a spare part ?

The code for the threaded blanks is PDL56PLUG20GY

What is the cable entry for a LE1M35U705

2 x 13mm PG at bottom and top
2 x 20mm ISO at bottom and top
2 x 21mm PG at bottom and top
2 x 25mm ISO at bottom and top

What are the dimensions of the SC2025 behind the plate ?

The SC2025 protrudes 20mm from the rear of the plate, Allow minimum 10mm for cabling behind the plate.

What is the replacement for a XCKJ5910H7?

The replcaement for this Safety switch would be a XCSB702 which was the superceeded again by the XCSB702.
The Main difference is that the XCSB702 has a 20mm thread as apose to the half inch thread.

Can 56JB1SWA take metal glands?

56JB1SWA has 3 entries, all of which are suitable for any metal gland (especially glands for SWA cables) that have a 20mm thread.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56JB1SWA

Program example: M340 Unity with LXM32A via CANOPEN

Goals and Symptoms

Program example:
M340 Unity with LxM32A via CANOPEN

Cause

Hardware description:
M340 2030 V2, LxM32A with Node-ID2, Baudrate 125KB, Unity 4.0

Brief description of the application:
Program example with one drive. Control with the integrated visulization.

Attention:
Currently it is not possible to activate several PDO which contain the same objects. E.g. it´s not
possible to activate PDO2 (Control word + Set position) and PDO3 (Control word + Set speed)
at the same time.

Attachments

(Removed File URL: 199533_C652/M340-Lexium32_via_CAN.zip)(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/0e5b8d1fbbd71985c125760900109cba/fl_block_5/0.630?OpenElement&FieldElemFormat=gif)

ION Meters: DST settings cannot go beyond 03:14:07 UTC on 19 January 2038

Issue    
Need to program the daylight saving timing but cannot go beyond January 19 2038.


Product Line
ION meters

Environment
ION Setup v3.0

Cause
The Year 2038 problem relates to representing time in many digital systems as the number of seconds passed since 1 January 1970 and storing it as a signed 32-bit binary integer. Such implementations cannot encode times after 03:14:07 UTC on 19 January 2038.  Therefore, a problem will arise while configuring DST schedule for the ION meters with the start year 2019 and end year 2038, the user will not be able to set the start and end dates beyond 03:14:07 UTC on 19 January 2038.

Resolution
As of now, the only solution is to use an updated version of ION Setup software. The latest version of ION Setup can be downloaded from the following link FA212816

Once the user has the latest ION Setup installed,  it will allow configuring DST schedule for ION meters beyond 03:14:07 UTC on 19 January 2038.
  1. Go to Setup Assistant-->Clock Settings-->Timezone (click edit)--> Check "Update daylight saving dates starting" and select 2019, click OK
  2. Now check the DST settings tab for schedule. Schedule now starts from 2019 and ends in 2038
  3. If there are no overlaps user will be able to save changes else check for overlaps in the schedule
  4. Once overlaps are removed/edited, changes can be saved successfully
  
Show More