The PDL version of the 2015XX is a PDL694XXWH.
The part name is 2025XAPID-WE
A TV mech CAN NOT be put into 2015X. Must have at least 150mm of separation.
Yes it will fit into 2025XA / C2025XA, with the following mounting hardware only: 154, 154RM, 154/1, 155NAR, 155VNAR, 155PRM, 156/2, 157, 164, 449A. Will not fit SC2025XA / 25XA. ( Also please note that it will need to be placed into plate in vertical configuration)
For more information on the 30USBCM please visit the Clipsal web site or click link provided .https://www.clipsal.com/Trade/search-results?q=30usbcm
Yes however the USB mech must be placed on its side. using parts C2025XUA 30USBCM
Yes, it is a 30M mech and can be two way wired
The part number is 60R32 which is available in Artic Silver (colour code 3A - which suits the standard Saturn range), Charcoal (CC - for the Saturn Horizon range), Zen Black (ZB - for the Saturn Zen range) and Zen White (ZW - for the Saturn Zen range). This part is rated 32A suitable for the 4025XUA (standard Saturn) or Z4025XUA (Saturn Zen) which is a standard double GPO with an extra removable switch
Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail
and check under the Documentation Tab for more information.
60R32 depending on the colour of the mechanism will suit 4025XA, 4025XUA in the saturn range and Z4025XA, Z4025XUA in the Saturn Zen range. It will not fit into any other switch plates in the Saturn or Saturn Zen range.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60R32
No , We have sinlge outlets with USB chargers or you can fit 1 x USB charger mech to either a 2025XA or a C2025XA ( in vertical configuration )
For further information on this please visit the clipsal web site on the link provided
Yes, the 60R32 series are designed only to be fitted into the 4025XUA and 4025XA series
No , The 60R32 series mechs are only designed to go into the 4025XA and 4025XUA plate styles. If Mechs over 32 amp are required for Saturn plates then you will need either 4031VH plate and 30M35 series mechs or the dedicated cooker plates 4061D32 or 4061/45 series
Yes, the 2025VXA does come with shutters.
2025VXA White is the only commercilaized colour in NZ.
Yes, the part number is a 2015D15
|No, we dont sell one complete, you would have to get a C2015XS take out the extra switch and put in a 30SFM.
Not available, but Clipsal 2015/15 is available in red but it's horizontal.
Yes, you can put a USBC into a P2015X by using a P30Z as long as the extra switch is removable.
There is no usb mech to suit however we do sell a saturn series double outlet with usb mech. the part number is 4025USBC.
The part number for the 32 amp mech to suit a 4025XUAIt is the 60R32-3A.
What is the part number of a replacement button cap for an XB4BA21?
Use a ZBA2 black cap or otherwise the black cap from a universal ZBA9 kit
CTA-ID : 2015097
What is the part number for a diode for a CA3KN relay?
LA4KC1B or LA4KC1E is the diode and zener diode for the CA3KN relay.
CTA-ID : 2015604
The conversion plate is no longer available but you can use the below part numbers for the Clipsal version
2000/3-WE + 2015-WE + 2727-WE + 2031RC30-WE
Yes, there are a few GPO's that are individually wired, they are C2016/2, 16/2MF, 2015/2V and 15/2V. In a weather proof option we have the WSC227/1/2
Factory installation of key interlock provisions on NW Masterpact circuit breakers.
Products sold and used in the United States
Factory installed key interlock on NW Masterpact circuit breakers
It is possible to order "provision-only" for an NW breaker key interlock. The provision is also available as a field-installable kit. See pricing guide for catalog numbers.
CTA-ID : 2015133
Most common issue is Parameter o19 must be set to the maximum pressure of the sensor in Bars. Parameter o20 is set to the PI setpoint in Bars.
To get the pressure in Bars, divide the pressure in PSI by 14.504.
CTA-ID : 2015151
What is the difference between the XACA201 and XACA205 pendant stations?
XACA201 has 1-NO contact on each button. The XACA205 has 1-NO on one button and 1-NC contact on the other button.
Is the CA2KN22G7 DIN rail mountable?
Tesys K IEC Style Relays
Determine how to mount for application.
Yes. They are made to mount on 35mm DIN3 type mounting rail.
Old Product Design metering
Commercial Metering Equipement (CME)
All CME parts are obsolete and no longer available.
DC ampere rating for 9001KA contact blocks
Harmony Push Buttons
2.5A continuous up to moved. (NEMA Q600)
The part no is 2015H2. It is 2 x single horizontal switched sockets side by side with a single frame.
Part no 2025XAN can be used the USB has to mount vertically to enable it to fit
Red is not a standard colour for this part but it can be made as a special