clip wall recessed mount

Mounting Accessories WAll Board Clip to Fit Slimline to 5 - 10 mm, Thick Board

Catalogue Number: 154RM
clip wall recessed mount
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Product or component type
clip
Accessory / separate part category
mounting accessory
Fixing center
84 mm
Depth
11 mm
Length
120 mm
Width
50 mm
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What Series is the 154RM C-Clip, plaster bracket for?

That bracket will suit the slimline, Saturn, ZEN and OneTouch series plates.

What are the brackets to suit the Strato/Modena range?

The brackets to suit the Modena/Strtato are the same as the Slimline brackets, 154RM and 155NAR etc...

What C Clip suits the BSL25A?

The 154RM or 154B25 will suit the BSL25A.

For more information, please refer to the link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=154RM 
https://www.clipsal.com/Trade/Products/ProductDetail?catno=154B25

 
 

What is the 154 that suits the Slimline range?

The 154 to suit the Slimline range is the 154RM.

- Does the 30USBCM fit into 2025XA and C2025XA

Yes it will fit into 2025XA / C2025XA, with the following mounting hardware only: 154, 154RM, 154/1, 155NAR, 155VNAR, 155PRM, 156/2, 157, 164, 449A. Will not fit SC2025XA / 25XA. ( Also please note that it will need to be placed into plate in vertical configuration)
For more information on the 30USBCM please visit the Clipsal web site or click  link provided .https://www.clipsal.com/Trade/search-results?q=30usbcm

What is the replacement for 15465 KWH meter?

What is the part number for a 6 gang switch plate 114mm x 114mm?

The part number for a 6 gang switch plate 114mm x 114mm is - 36/2

 

What is the dimensions for a PDL 535WH

 Dimensions -  158mm x 158mm x 140mm high.

What is the replacement for 15467 Power meter with 100/5 CTs?

Are the NSX250 & 400's the same width

 No the nsx250 is 104mm wide and the 400 is 140mm

What are the dimensions for part number C2016/2?

The dimensions for part number C2016/2 are:
159mm (L)  47mm (H) 28mm (D)

What is the continuous current rating of a CA2K relay?

Issue:
What is the continuous current rating of a CA2K relay?

Product Line:
Tesys Relays

Environment:
All Products

Cause:
Product Features

Resolution:
10 Amperes.


CTA-ID : 15484

What is part number for 150mm 2m cable cover?

Part number is 287/150

What are the dimensions of the 4CC9-WE?

The dimensions of the 4CC9 are 178mm Wide, 206mm High and 104mm Deep.

What are the dimensions of the INS400 single handle transfer switch 31150?

205mm x 395mm x 155mm (H x W x D) excluding the handle.
Overall depth with standard handle is 213mm.
See attached.

What wall clip is used for Prestige large format plates?

The 154/2 is the clip to suit any Prestige large format plate 115mm x 115mm

Part number for a C clip to suit prestige range?

The part name is 154/2

What are the outside dimensions of the FPSS121-CAT6?

The dimensions are 121mm (W) X 83mm (H) X 155mm (D).

Is there a 154 C-clip that does thicker than 10mm plasterboard/ gyprock?

Yes the 154/1 does plasterboard/gyprock thickness's between 19-25mm.

What is the dimensions for a PDL 664VH four aperture architrave grid plate ?

The Overall Dimensions - 130mm x 32mm
Mounting Centres - 114mm

What is part number for 150mm inline axial fan OErre?

Part number is a OW1950.

What is the part number for a 150mm wall exhaust fan with pull cord?

The part number for a 150mm wall exhaust fan with pull cord is - 7008A

For further information ,visit link below:-
https://www.clipsal.com/Trade/search-results?q=7008A

What is part number for 150mm bell mouth coupling?

The part number for 150mm bell mouth coupling is a - 288/150

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=288/150


User-added image

What are the dimensions for part number 162/4?

The dimensions are 186mm (w) x 194mm (h) x 58mm (d)

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=162/4

User-added image

What is the part number for 13 hole active link with 2 tunnels for 150mm cables?

The part number for 13 hole active link with 2 tunnels for 150mm cables is - L13/150R

For further information visit link below:-
https://www.clipsal.com/Trade/search-results?q=L13/150R
 

What is the part number for a 150mm wall exhaust fan with auto shutters and switched remotely?

The part number for a 150mm wall exhaust fan with auto shutters and switched remotely is - 7006A
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=7006A

What is the part number for tunnel/crimp lugs for a NSX160B C/B for 150mm cable?

The part number for tunnel/crimp lugs for a NSX160B C/B for 150mm cable is - LV420253

For further information , visit link below:-
https://www.schneider-electric.com.au/en/search/+LV420253
User-added image

What is the part number for a 150mm wall ex-fan?

The part number for a 150mm wall ex-fan is - 7005A or 7007A

For further information, visit the links below:-
https://www.clipsal.com/Trade/search-results?q=7005A
https://www.clipsal.com/Trade/search-results?q=7007A

User-added image

Why can't I measure a voltage on the time switch output contacts.

The time switches have a "volts free" contact which means that the contact is not connected internally to the time switch power supply.

The contact needs to be separately fed (usually linked across from the incoming live)

Is there a bracket to mount sockets onto Actassi trucking?

You can direct mount onto the lid of the 80 or 155mm trunking or use the ISM15150

Other options are the Unistrut 2087016 and adaptors can also be found at cccutting.co.nz

What is the part number of the wall clip suitable for large format Prestige P2000 plates?

The part number for the wall clip suitable for large format Prestige P2000 plaes is 154/2.

Do you have the a longer version of the standard mounting screws for your power points?

Yes the part number for the longer screws is a 355A. They are 50mm long apposed  to the 355 which is 32mm long. Both screws are M3.5 X 0.8 Pitch.

Is the modena vertical single switch the same size as a 600 Series single switch.

The size for a modena Single Switch PDL881V - 85mm (W) x 124mm (H) x 9mm (D) - Mounting Centres - 84mm

PDL681WH - Plate size 118mm(h) x 74mm(w) - Mounting centres 84mm

Does Clipsal have a metal board, at least 36 pole and less than 150mm deep?

Yes, we have the 4C48FD which is only 105 mm deep.
For more information, please refer to the link:​https://www.clipsal.com/Trade/Products/ProductDetail?catno=4C48FD

Is 7005A, 150mm window mounted exhaust fan, double insulated?

7005A is not double insulated. Hence it needs to be earthed.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=7005A

What is the difference between a XB2 and XB4?

Issue:
Need to know what are the changes from XB2 to XB4

Product Line:
Harmony Pushbuttons

Environment:
All Products

Resolution:
The XB4 requires only 1 screw to tighten on the mounting collar verses 2 on the XB2. This allows easier installation. The XB4 push buttons can accept 3 contact blocks side-by-side-by-side for a total of nine contacts on non-illuminated devices. Using the XB4 Protected LED light modules and contacts on each side will allow shallower depth than the XB2 on illuminated devices.
 

What is the replacement for a MSW320R?

The alternitive for the MSW320R is the 56SW320R.

Some of the key features are:
  • 1 gang
  • 107 mm Height x 101 mm Width x 124mm Depth
  • 1.5 - 12 sq mm conductor terminal
  • M150 Motor rating
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SW320R

 

What are the dimensions of the 3105PEN7440?

The dimensions of the 3105PEN7440 are 750mm (H) X 405mm (W) X 150mm (D).

Can part number 2015X accommodate TV mech?

A TV mech CAN NOT be put into 2015X. Must have at least 150mm of separation.
 

What are the basic part numbers I need for 50mm x 150mm skirting duct?

The basic part numbers are the duct (PL50150DN), the lid (PL150CLN), the joiners (PL50ACC), power and data covers (PL150CFCN), power shrouds (PLPSK) and data shrouds (PLDSK). These are all in natural anodised colour.

For more information, visit the website at www.clipsal.com/Trade/search-results and click on the link to view a brochure.

What is the alternative for a Main switch (surface) 3 phase T300-BK?

The original T300-BK was unfortunately discontinued. As an alternative the T300FA is very similar. The Majority of its components are the same but some specifications may vary.
Some of the key features are:
  • Panel mount
  • 300 Amp rated
  • Triple pole
  • Front wiring cover
  • Has dimensions of 210mm (L) x 158mm (W) x 112mm (D)
For Further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=T300FA

Or see PDF attached below.
 

Does the WHC363 have 32mm entries?

Yes, the WHC363 comes with 4 32mm entries. two at the top and two at the bottom.

Some of the key features are:
  • 1 gang Isolating switch
  • On/Off switch
  • 8 mm diameter padlocking facility
  • M330 rating
  • Dimension: 114mm Height x 230 mm Width x 130 mm Depth
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=WHC363

What is part number for 56 series single phase reversing switch?

The part number for 56 series single phase reversing switch is a 56SW320R.
 

Key Features

  • 1 gang
  • 107 mm Height x 101 mm Width x 124mm Depth
  • 1.5 - 12 sq mm conductor terminal
  • M150 Motor rating
Please follow the link for more information:

https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SW320R

Can I put a data mechanism in a 4025XA double power point with Extra switch?

No, you need to have 150mm of seperation between services. Therefore you will need to have the data outlet on a seperate plate 150mm from the closest power point.

The part you will require is the 4031VH, which is the saturn communication plate.

Some of the key features are:

  • Accepts 30 series mechanisms (Including DATA/COMMS, 30PB and 30PBL)
  • Less mechanism
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4031VH

 

 

Do Clipsal have a 150 mm, 22.5 degree conduit bend in EO.

No,  unfortunately our bends only come in 45 degrees and 90 degrees.
The part number for a 45 degree 150mm bend is a 247PH150-eo.
Please see following link and look under documentation tab for complete range and specifications.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=247PH150

- Can the 7100WP be used with 7006A & 7008A?

No Not suitable for 150mm fans such as the 7006A & 7008A. It is designed to use with the 7106a and 7108a

For more information on the 7100wp please visit the Clipsal web site on the link provided
https://www.clipsal.com/Trade/Products/ProductDetail?catno=7100WP

What size duct does a 135mm, drop in lid suit in the Moduline range?

The 135mm drop in lid would suit the 150mm duct however all drop in products have been obsolete for a at least 2 years.

What are the dimensions and Cut out for the pop up outlet SBIP2P?

The dimensions and Cut out for the pop up outlet SBIP2P are:

Dimensions:
  • 119mm (L) X 124mm (W) X 80mm (D)

Cut out:
  • 105mm (L) X 105mm (W) X 80mm (D)

Some of the key features are:
  • Pop-up outlet
  • 10A Rated
  • 250V
  • Auto Switched
  • Various colours available
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=SBIP2P


User-added image
 

Do you do the cover only for the WHC380 3 pole, 80A isolator?

No, Unfortunately we dont do the cover only for the WHC380 3 pole, 80A isolator. You will need to replace the entire unit.
Some of the key features are:
  • 1 gang Isolating switch
  • On/Off switch
  • 8 mm diameter padlocking facility
  • M330 rating
  • Dimension: 114mm Height x 230 mm Width x 130 mm Depth
  • Cables looped in and out from overhead
  • In and out from underground
  • In and out straight through the switch
  • Cables in through side and out through bottom
  • Two 25mm rear knockouts are moulded in the base
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=WHC380






 

What are the part numbers required to make data kit and power kit for moduline Tal Plus duct ?

data kit is made of 2 part nos
> PLDSK (which is the Shroud) and then front cover PL125CFCx (x will be the color N,B,W,O) > this is for 125mm duct
> PLDSK (which is the Shroud) and then front cover PL150CFCx (x will be the color N,B,W,O) > this is for 150mm duct

power kit is made of 2 part nos
> PLPSK (which is the Shroud) and then front cover PL125CFCx (x will be the color N,B,W,O) > this is for 125mm duct
> PLPSK (which is the Shroud) and then front cover PL150CFCx (x will be the color N,B,W,O) > this is for 150mm duct
 
Show More