nipple brass cond 25mm/ 1in.

Conduit Nipple, Brass, M25x1.5 x 1-16, Male

Catalogue Number: 1243AN25
nipple brass cond 25mm/ 1in.
Retail
$62.07
RRP (Inc. GST)

Specifications

hide show
Product brand
Clipsal
Range of product
Series 1243
Material
brass
Connector type
thread connector
Product destination
diameter: 25-25 mm tube
Length
40-40 mm
Standards
  • AS 1722.2
  • AS 1721
  • ASC 66.1
  • AS 2052
    • Package 1 Weight
      0.046 kg

      Frequently Asked Questions

      hide show

      Does the 1240/25 series come with gaskets?

      No, they are light duty. Buy the 1240HL25 to obtain a heavy duty lid and gasket , or if gasket is required for retro fit then buy 1240GT
      For more information on this product range please visit the Clipsal web site on the link provided
      https://www.clipsal.com/Trade/search-results?q=1240

      Whati s pitch thread for part number 1245/25?

      Pitch thread is 1.5mm

      What is the thread type on a 1235/25?

      The thread type on a 1235/25 is BS - British Standard.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=1235/25 

      SRT 8 or 10kVA reports Error P.11 or DC Bus Soft Start or event codes 124/125

      Issue: The UPS reports P.11 or DC Bus Soft Start - event 124/125



      Product Line: SRT 8-10kVA Models 

      Resolution:
      Clear the Alarm. Turn the output ON again. If the problem persists, Brain dead the UPS. If the alarm reoccurs, perform a UPS Firmware upgrade to the latest 04.7 revision that addressed these issues. For complete upgrade instructions please refer to FA164737.
       
      Release Notes (UPS 04.7):
      ========================
      1. Improved system performance of transitions between Online and Bypass operation modes.
      2. Improved system behaviour for three phase input configurations to reduce transitions to battery under certain input feed conditions.
      3. Improved system behaviour to eliminate false detection of DC bus under voltage alarm under certain conditions.
      4. Improved system handling for certain AC input conditions during system start-up.