plug brass screw cond 50mm

Series 1220S Brass Plugs, 50mm, Screwed Conduit, Brass Plug

Catalogue Number: 1220S50
plug brass screw cond 50mm
Retail
$166.28
RRP (Inc. GST)

Specifications

hide show
Product brand
Clipsal
Range of product
Series 1220S
Material
brass
Product destination
diameter: 50-50 mm tube
Stub stiffness
rigid
Package 1 Weight
0.16 kg
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)

Frequently Asked Questions

hide show

What is the part number for a 20mm steel conduit plug?

The part number  for a 20mm brass plug for steel conduit is 1220S20.

Is there a black version of the 220S20?

Yes, there is.  The 220S20 comes in 3 colors.

For more information, please refer to the link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S20 

How do i seal up a 50mm hole in the 230DRAVL?

Using parts 220S50-GY and 260/50-GY. Placethe 260/50 on the inside and the 220S50 on the out side place it in the hole and screw them together. This willl then seal the hole.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=260/50
https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S50
 
 
 

What is the part no for 40mm Screw caps

Part no 220S40 available as standard in Grey
Orange can be supplied as special

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S40
User-added image

What part number do I need if I am looking for a 1920/30 in brass with a white porcelain base

Part number is 1920/30-WE

What is the part code for a Heritage 1000 Watt dimmer

You need to use 1920/450 dimmer with a 32/1000, remove the dimmer module and replace with the pot mech

How to gear in two LXM28 drives in SoMachine?

Issue:
Setup function block GearIn_LXM28 so that the master and slave drives follow each other perfectly

Product Line:
LXM28

Resolution:
The NUM of the GearIn_LXM28 function block should be set to 1280000 and the DENUM should be set to 8192 (2048 x 4).
This will make the perfect gear between the master and slave.

What is the native resolution of the encoder counts for Lexium 28 servo drives?

The native resolution for Lexium 28 is 1280000 counts per revolution on the motor.

This is important to know especially when using the LXM28 in gear mode.
The factory default ratio for gear mode is 128/10      (128 = numerator  10 = denominator)
The equates to 128 motor increments for 10 pulses applied to the pulse train input.  


Rev 10-23-18
 

What is the factory default scaling on Lexium 28 servo drives?

The factory default for position scaling is 128 as the numerator and 10 and the denominator.  Parameters P1-44 and P1-45 respectively.
These values are based on the encoder feedback resolution of 1280000 counts per revolution from the motor.

With the factory default scaling a commanded move of 100000 will result in the motor shaft making one full revolution.


rev 7-19-18

 

What is the native resolution of the encoder counts for Lexium 28 servo drives?

The native resolution for Lexium 28 is 1280000 counts per revolution on the motor.

This is important to know especially when using the LXM28 in gear mode.
The factory default ratio for gear mode is 128/10      (128 = numerator  10 = denominator)
The equates to 128 motor increments for 10 pulses applied to the pulse train input.  


rev 10-19-17

PME 9.0 upgrade times out at 'Create Database' step, fails at 'Verify Databases' step

Issue
When upgrading to PME 9.0 from an earlier version, the 'Create Database' step times out, causing the 'Verify Databases' step to fail.



Product Line
Power Monitoring Expert 9.0

Environment
Software Upgrade

Cause
The default timeout for the 'Create Database' step is 20 minutes. If the databases are large, it can sometimes take longer than 20 minutes to finish upgrading the databases, resulting in this step timing out. Since the database upgrade doesn't complete, the installer does not pass the 'Verify Databases' step.

Resolution
*Warning: Take backups of any files prior to modifying them. Ensure the backups are in a location that will not be overwritten (i.e. the Desktop).

1. Click Exit and close out of the installer
2. The installation media cannot normally be edited, so either copy the install disc to the hard drive or download and extract the PME_9.0.iso using a .iso file extractor (e.g. 7-Zip)
3. Navigate to setup\ BrokerFragments
4. Right-click > Edit the Database.Core.broker.xml file

If Windows Authentication was used during Database Software step:

5. Locate the following line, where the current 'TimeOut' is set to 1200000 ms, or 20 minutes: 
<Request Name="CreateIONDatabasesWindowsAuth" EstTime="500" TimeOut="1200000" UIName="#CreateDatabase" ActionOnFail="Stop">
6. Change the 'TimeOut' parameter to 12000000 ms, or 200 minutes: 
<Request Name="CreateIONDatabasesWindowsAuth" EstTime="500" TimeOut="12000000" UIName="#CreateDatabase" ActionOnFail="Stop">



If SQL Authentication was used during Database Software step:

7. Locate the following line, where the current 'TimeOut' is set to 1200000 ms, or 20 minutes: 
<Request Name="CreateIONDatabasesSqlAuth" EstTime="500" TimeOut="1200000" UIName="#CreateDatabase" ActionOnFail="Stop">
8. Change the 'TimeOut' parameter to 12000000 ms, or 200 minutes: 
<Request Name="CreateIONDatabasesSqlAuth" EstTime="500" TimeOut="12000000" UIName="#CreateDatabase" ActionOnFail="Stop">



9. Save the Database.Core.broker.xml file
10. Navigate back to the root directory of the installation media, then right-click MainSetup.exe > Run as Administrator to re-run the installer with the new timeout setting
 

Control power rating on the CM4000 series meter is different than what is stated in the specifications in CM4 manual

Issue
Control power rating is different than what is shown in the CM4000 series user manual 

Product Line
CM4000 Series

Environment
Wiring

Resolution
The control power for the CM4000 series Circuit Monitors is rated for a voltage range of 90-305V ac or 100-300V dc. It was our standard practice to publish these ratings. Recently a change was implemented to mark the circuit monitors with the nominal voltage ranges instead of the maximum range. As a result the meters now show a control power voltage range of 100-277 V ac or 125-250 V dc.
If the customer needs a document with signature for their customer, you can send them the following document from John Straughn below.

CM4 Power Supply Rating.pdf

 
Show More