TOG-10 Spring Toggle Cavity fixing

Thorsman TOG, M5x50 mm, Cavity Fixing Spring Toggle, Set of 51

Catalogue Number: 1208057
TOG-10 Spring Toggle Cavity fixing
Retail
$0.85
RRP (Inc. GST)

Specifications

hide show
Range of product
Thorsman
Product or component type
cavity fixing
Product name
Thorsman TOG
Device short name
TOG
Provided equipment
screw
Mounting support
board material
Device application
board material
Mounting support
wall mounted
Thread type
M5
Screw diameter
5 mm
Screw length
50 mm
Drilling diameter
14 mm
Colour tint
metal
Quantity per set
set of 50
Sale per indivisible quantity
50
Material
  • screw: steel electroplated
  • cavity fixing: sheet metal electroplated
    • Practical load capacity
      pull-out load: 180 N for 13 mm plasterboard
      Thickness
      0-20 mm fixture
      Environmental characteristic
      fire resistance
      Package 1 Weight
      12 g
      Package 1 Height
      48 mm
      Package 1 width
      11 mm
      Package 1 Length
      60 mm
      Sustainable offer status
      Green Premium product
      REACh free of SVHC
      Yes
      EU RoHS Directive
      Pro-active compliance (Product out of EU RoHS legal scope)
      Toxic heavy metal free
      Yes
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
       Pro-active China RoHS declaration (out of China RoHS legal scope)
      Environmental Disclosure
      ENVPEP111114EN

      Frequently Asked Questions

      hide show

      How can you choose an Altivar drive based on motor KW data not HP?

      Issue:
      How can you choose an Altivar drive based on motor KW data not HP?

      Product Line:
      All Altivar products.

      Environment:
      All

      Cause:
      Translation of differing standards.

      Resolution:
      1Kilowatt = 1.34102209 Horsepower.  As an example, the ATV71H075N4 is rated for .75KW and 1HP.   .75 * 1.34102209 = 1.0057 HP.

      Can we supply replacement parts for the two black plastic pieces on the left hand side of a Masterpact NW drawout breaker mechanism?

      Replacement part is 47911.  This part is only available to Schneider Electric Field Services.  See attached installation instructions.


      CTA-ID : 2060507

      What is the difference between the 3220 motion controller part numbers 100-037 and 100-037-252?

      Both of these parts are CPU I/O boards for a model 3220 motion controller, the 100-037 is a replacement for the 100-037-252. The -252 is a layered board designed for high noise applications.


      Legacy KB System (APS) Data: RESL156292 V1.0, Originally authored by on , Last Edited by on
      Related ranges: Other Motion controllers

      What is the part number for the solid state overload relay for 185 amps for LC1F185G7?

      Product Line:
       
      Tesys F line Contactors

      Resolution:
       
      The LR9F5371 has a setting range of 132-220 amps. The interconnection kit LA7F407 is required to directly mount the overload to the contactor.


      CTA-ID : 2060527

      What is the difference between a 9001KR4 and 9001KR24?

      Issue:
      Difference between 9001KR4 / 9001KR5 and 9001KR24 / 9001KR25

      Product Line:
      Harmony Push Buttons

      Environment:
      Harmony 30mm

      Resolution:
      The 9001KR4 / 9001KR5 has  a snap on plastic mushroom knob and the 9001KR24 / 9001KR25 has a screw on plastic mushroom knob with set screw.

       

      What is the part number of the adaptor that can be used for 25 x16mm ducting to 20mm conduit?

      900/25/16CA is the adaptor that can be used for 25 x16mm ducting to 20mm conduit.
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=900/25/16CA
       

      Momentum CAD Drawings

      Goals and Symptoms

      Momentum CAD Drawings

      Causes and Fixes

      Momentum CAD Drawings as of 1/20/05

      STB UL Certification, 12/2007

      Goals and Symptoms

      This resolution contains the currently available STB product Underwriters Lab certification as of December 2007.

      Causes and Fixes

      See Attachments for the STB UL certification.

      Attachments


      (Removed File URL: 190462_4842/STB_UL_2007.zip)(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/7867fd9951a10ec2c12573be001611e5/fl_block_5/0.586?OpenElement&FieldElemFormat=gif)


      Legacy KB System (APS) Data: RESL190462 V1.0, Originally authored by WeDa on 12/27/2007, Last Edited by WeDa on 12/27/2007
      Related ranges: Advantys STB

      Is the 2031V66 switch 2 way compatible?

      Yes, as it is based on 30 series mech with 4 terminals it is 2 way compatible.

      Some of the key features are:
      • 1 gang weatherproof switch
      • Standard size gridplate and surround complete with one 30M switch
      • Vertical mount
      • 116 mm Length x 76 mm Width x 30 mm Depth
      • 84 mm apart Mounting centres

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031V66

      PME 9.0 upgrade times out at 'Create Database' step, fails at 'Verify Databases' step

      Issue
      When upgrading to PME 9.0 from an earlier version, the 'Create Database' step times out, causing the 'Verify Databases' step to fail.



      Product Line
      Power Monitoring Expert 9.0

      Environment
      Software Upgrade

      Cause
      The default timeout for the 'Create Database' step is 20 minutes. If the databases are large, it can sometimes take longer than 20 minutes to finish upgrading the databases, resulting in this step timing out. Since the database upgrade doesn't complete, the installer does not pass the 'Verify Databases' step.

      Resolution
      *Warning: Take backups of any files prior to modifying them. Ensure the backups are in a location that will not be overwritten (i.e. the Desktop).

      1. Click Exit and close out of the installer
      2. The installation media cannot normally be edited, so either copy the install disc to the hard drive or download and extract the PME_9.0.iso using a .iso file extractor (e.g. 7-Zip)
      3. Navigate to setup\ BrokerFragments
      4. Right-click > Edit the Database.Core.broker.xml file

      If Windows Authentication was used during Database Software step:

      5. Locate the following line, where the current 'TimeOut' is set to 1200000 ms, or 20 minutes: 
      <Request Name="CreateIONDatabasesWindowsAuth" EstTime="500" TimeOut="1200000" UIName="#CreateDatabase" ActionOnFail="Stop">
      6. Change the 'TimeOut' parameter to 12000000 ms, or 200 minutes: 
      <Request Name="CreateIONDatabasesWindowsAuth" EstTime="500" TimeOut="12000000" UIName="#CreateDatabase" ActionOnFail="Stop">



      If SQL Authentication was used during Database Software step:

      7. Locate the following line, where the current 'TimeOut' is set to 1200000 ms, or 20 minutes: 
      <Request Name="CreateIONDatabasesSqlAuth" EstTime="500" TimeOut="1200000" UIName="#CreateDatabase" ActionOnFail="Stop">
      8. Change the 'TimeOut' parameter to 12000000 ms, or 200 minutes: 
      <Request Name="CreateIONDatabasesSqlAuth" EstTime="500" TimeOut="12000000" UIName="#CreateDatabase" ActionOnFail="Stop">



      9. Save the Database.Core.broker.xml file
      10. Navigate back to the root directory of the installation media, then right-click MainSetup.exe > Run as Administrator to re-run the installer with the new timeout setting
       

      Where can information regarding the heat contribution or heat loss of a control transformer be obtained?

      Issue:
      Heat dissipation or heat loss Listing for 9070 Industrial Control Transformers.
      Is there a way to calculate the full load heat contribution in BTU/hr if I have the control transformer`s full load losses in watts? Example:  9070T2000D1

      Product Line:
      Control Transformers

      Environment:
      9070 Type T, TF, EO

      Cause:
      Application

      Resolution:
      Heat contribution information can be obtained from the 9070CT9901 Catalog.  see Table below for common voltages ordered.  

      If the full load losses of the transformer are known, then the heat contribution at full load can be obtained by multiplying the loss in watts by 3.414 to yield BTU/hr.  For Example: The full load losses of the 9070T2000D1 is 132 watts. Multiplying by 3.414 yields a heat contributiion at full load to be 451 BTU/hr.

      For 9070T transformers not listed below, a request to Low Voltage Transformer Marketing will need to be initiated for Full load losses .

      SQL Reporting Services service will not start

      Goals and Symptoms

      Issue
      SQL Server Reporting Services fails to start with the following error:

      The SQL Server Reporting Services (ION) service failed to start due to the following error:
      The service did not respond to the start or control request in a timely fashion.

      Additional errors in the Windows System Log include the following:

      A timeout was reached (30000 milliseconds) while waiting for the SQL Server Reporting Services (ION) service to connect.

      Facts and Changes

      Environment

      ION Enterprise (IONE) or StruxureWare Power Monitoring (SPM) with SQL Reporting Services

      Causes and Fixes

      Cause

      If there are no other errors in the Windows Application or System Logs, the issue might simply be that Reporting Services is taking longer than the 30,000 milliseconds to start up, and the Service Controller is stopping the process.


      Resolution

      A simple registry key can be added to increase this timeout.

      Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.

      1) Open up regedit.exe and browse to HKLM\System\CurrentControllset\Control
      2) If it is not already there, create a new DWORD called ServicesPipeTimeout.
      3) Set the value (decimal) to something higher than 30,000 ms (i.e. 120,000 ).
      4) Restart the Server and see if the SQL Reporting Services service starts up.




      If the service does not start, the timeout might have to be further increased.


      Legacy KB System (APS) Data: RESL209797 V1.0, Originally authored by MaTh on 11/28/2012, Last Edited by MaTh on 11/28/2012
      Related ranges: Power Monitoring 7.0, ION Enterprise V6.0
      Show More