FAQ000223200
25 October 2021
The ATVLogic could be deactivated by "Disabling the function" (FBCD) or the logical input that start the ATVLogic Mode (FBRM).
- Set FBCD to STOP, this will deactivate the ATVLogic function:
By keypad:
Go to Drive menu/ Configuration/ Full/ Function blocks, then set FBCD to STOP.

By SoMove:
Connect the SoMove to the drive, then set FBCD to STOP.

- Check by keypad or SoMove which logical input (LIx) is set to FB start mode, then disable it.
In the above example, when LI3= OFF, the ATV logic is disabled.