Image of 2031VETR3-WE timer
timer 1g 3wire 10a 15hr t/del
Image of 2031VETR3-WE timer
timer 1g 3wire 10a 15hr t/del

Time Delay Switch, 1 Gang, 3 Wire, 10 A

Catalogue Number: 2031VETR3
Image of 2031VETR3-WE timer
timer 1g 3wire 10a 15hr t/del
Image of 2031VETR3-WE timer
timer 1g 3wire 10a 15hr t/del
Retail
$372.39
RRP (Inc. GST)
Colour White Electric (WE)
  • White Electric 1 PCE

Specifications

hide show
Product brand
Clipsal
Range of product
Series 2000
Device presentation
basic element with full cover plate
Autonomy
10 s...15 h
[Ue] rated operational voltage
220...240 V AC
EU RoHS Directive
Compliant

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Installation Instruction

  • Certificates (MSDS)

Frequently Asked Questions

hide show

Is the 2031vetr available in the C2000 series?

It is only available in either the standard series ( 31VETR) or 2000 series ( 2031VETR)

Can the 2031VETR and 2031VETR3 operate without a neutral?

The 2031VETR3 will not operate without a neutral however the 2031VETR WILL operate without a neutral as it was designed purely as a 2 wire device I.e. Active & Switched Active.

Is mech only available for part number 2031VETR?

No the mech comes only complete in plate.

What is the minimum load for a 2031VETR?

The minimum load for a 2031VETR is 20mA.

For more information, please refer to the link:
https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001508.pdf 

Can part number 2031VETR3 be used in conjunction with air conditioner?

2031VETR3 can be used with air ocnditioner up to 10amps.

 

What type of switch mechanisms can be used to remotely switch 31VETR3 / 2031VETR3 push button timer?

Momentary switch mechanisms (Bell press mechanisms) can be used to remotely switch 31VETR3 / 2031VETR3. Example of 30 series momentary switch mechanisms are 30PBBP or 30PBBPL.
For further information, please visit 
https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001273.pdf
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBBP
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBBPL

2031VETR3 - is it an intermediate switch? Can it be used in a stairwell to control a load from three floors?

2031VETR3 is three wire switch. 
Additional switches, 30mbp or the 30pbbp, can be installed in parallel to activate the timer from more than one location.

Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.
 

Is the 2031VETR3 available in a 15 amp version?

No , The 31VETR series are available in 10a versions only
For more information regarding this product range please visit the Clipsal web site on the link provided.
https://www.clipsal.com/Trade/search-results?q=31vetr
User-added image

How can 31VETR3/ 2031VETR3 push button timers be remotely switched?


For 31VETR3/ 2031VETR3 push button timers to be remotely switched, additional switches have to be installed in parallel, allowing the timer to be activated from one or more remote locations as shown in the wiring diagram below:


NOTE:
• The remote switch wiring must be rated for 240V a.c.
• The sum of cable lengths used to connect the remote switches must not exceed 100m.
• Remote switches MUST be Normally Open momentary operation type switches.
 

What is the time delay available on the 31VETF or 2031VETF?

The 31VETF Series is adjustable to allow fans to continue to run from 3 minutes to 10 minutes (approximately) after the lighting is turned off. The delay adjustment is accessible on the
rear of the device.

How does the three wire push button timer 31VETR3 or 2031VETR3 work?

The built in push button on the 31VETR3 or 2031VETR3 has the following functions:
• Pressing the button when the timer is passive will initiate timing and set the load, and indicator, to the active state according to the configuration switch settings.
• Pressing the button during timing will cancel timing and set the load, and indicator, to the passive state according to the configuration switch settings.
• To restart the timer when the load is already on, simply perform consecutive turn-on and turn-off functions.
For further information, please refer to the below link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=31VETR3
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR3
 

Does 2031VETR3 have a remote input?

Yes you can remotely switch the timer using a bell press mechanism.
Please follow link below for more information.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR3
Show More