Altivar 312 Variable Speed Drive, 0.37kW, 1.5kVA, 32W, 380..500V, 3 Phase

Back to Altivar 312 for Asynchronous Motors from 0.18 to 15kW Home ... Product Catalogue Industrial Schneider Electric - Electrical Distribution, Automation and Control Variable Speed Drives Altivar 312 Altivar 312 for Asynchronous Motors from 0.18 to 15kW

Altivar 312 Variable Speed Drive, 0.37kW, 1.5kVA, 32W, 380..500V, 3 Phase

Item Number: ATV312H037N4

Where To Buy

Product Dimensions

Width107 mm

Height143 mm

Depth152 mm

See full specifications

Datasheet

Download

Barcode

Qty	UoM	EAN	Colour
			-
			-
			-

Barcode

Qty	UoM	EAN	Colour
1	PCE	3606480077449	-

Specifications

Design

Sustainable offer status

Green Premium product

Warranty

18 months

Range of product

Altivar 312

Product or component type

variable speed drive

Product destination

asynchronous motors

Physical

Protection type

input phase breaks: drive
line supply overvoltage and undervoltage safety circuits: drive
line supply phase loss safety function, for three phases supply: drive
motor phase breaks: drive
overcurrent between output phases and earth (on power up only): drive
overheating protection: drive
short-circuit between motor phases: drive
thermal protection: motor

Insulation resistance

>= 500 mOhm 500 V DC for 1 minute

Local signalling

1 LED (red) for drive voltage
four 7-segment display units for CANopen bus status

Connector type

1 RJ45 for Modbus/CANopen

Marking

Height

143 mm

Width

107 mm

Depth

152 mm

Net weight

1.8 kg

Standards

IEC 61800-5-1
IEC 61800-3

Product certifications

CSA
UL
C-Tick
GOST
DNV
NOM

Relative humidity

5...95 % without condensation conforming to IEC 60068...2-3
5...95 % without dripping water conforming to IEC 60068...2-3

Ambient air temperature for storage

-25...70 °C

Ambient air temperature for operation

-10...50 °C without derating (with protective cover on top of the drive)
-10...60 °C with derating factor (without protective cover on top of the drive)

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Environmental Disclosure

ENVPEP110706EN

Circularity Profile

ENVEOLI100203EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Supply

internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection
internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection

Communication port protocol

CANopen
Modbus

IP degree of protection

IP20 on upper part without cover plate
IP21 on connection terminals
IP31 on upper part
IP41 on upper part

Others

Supply voltage limits

323...550 V

Prospective line Isc

5 kA

Continuous output current

1.5 A at 4 kHz

Output frequency

0...500 Hz

Nominal switching frequency

4 kHz

Switching frequency

2...16 kHz adjustable

Transient overtorque

170...200 % of nominal motor torque

Braking torque

150 % during 60 s with braking resistor
100 % with braking resistor continuously
150 % without braking resistor

Regulation loop

frequency PI regulator

Motor slip compensation

suppressable
adjustable
automatic whatever the load

Output voltage

<= power="" supply="">

Tightening torque

Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6...0.6 N.m
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 1.2...1.2 N.m

Insulation

electrical between power and control

Analogue input number

Analogue input type

AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm
AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm
AI3 configurable current 0...20 mA, impedance: 250 Ohm

Sampling duration

AI1, AI2, AI3: 8 ms analog
LI1...LI6: 4 ms discrete

Response time

AOV, AOC 8 ms for analog
R1A, R1B, R1C, R2A, R2B 8 ms for discrete

Linearity error

+/- 0.2 % for output

Analogue output number

Analogue output type

AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits
AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits

Discrete input logic

logic input not wired (LI1...LI4), < 13="" v="" (state="">
negative logic (source) (LI1...LI6), > 19 V (state 0)
positive logic (source) (LI1...LI6), < 5="" v="" (state="" 0),=""> 11 V (state 1)

Discrete output number

Discrete output type

configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
configurable relay logic: (R2A, R2B) NC - 100000 cycles

Minimum switching current

R1-R2 10 mA at 5 V DC

Maximum switching current

R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms

Discrete input number

Discrete input type

(LI1...LI6) programmable at 24 V, 0-100 mA for PLC, impedance: 3500 Ohm

Acceleration and deceleration ramps

linear adjustable separately from 0.1 to 999.9 s
S, U or customized

Braking to standstill

by DC injection

Time constant

5 ms for reference change

Frequency resolution

analog input: 0.1...100 Hz
display unit: 0.1 Hz

Physical interface

RS485 multidrop serial link

Transmission frame

RTU

Transmission rate

10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen
4800, 9600 or 19200 bps for Modbus

Number of addresses

1...127 for CANopen
1...247 for Modbus

Number of drive

127 for CANopen
31 for Modbus

Operating position

vertical +/- 10 degree

Network frequency

47.5...63 Hz

Dielectric strength

2410 V DC between earth and power terminals
3400 V AC between control and power terminals

Electromagnetic compatibility

1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3

Pollution degree

Protective treatment

Vibration resistance

1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 3-13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Operating altitude

<= 1000="" m="" without="">
1000...3000 m with current derating 1 % per 100 m

Unit Type of Package 1

PCE

Number of Units in Package 1

Package 1 Weight

1.92 kg

Package 1 Height

17.211 cm

Package 1 width

17.223 cm

Package 1 Length

20.752 cm

Unit Type of Package 2

S06

Number of Units in Package 2

Package 2 Weight

65.0 kg

Package 2 Height

73.5 cm

Package 2 width

60 cm

Package 2 Length

80 cm

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Product specific application

simple machine

Assembly style

with heat sink

Component name

ATV312

Motor power kW

0.37 kW

Motor power hp

0.5 hp

[Us] rated supply voltage

380...500 V - 15...10 %

Supply frequency

50...60 Hz - 5...5 %

Network number of phases

3 phases

Line current

2.2 A at 380 V, Isc = 5 kA
1.7 A at 500 V

EMC filter

integrated

Apparent power

1.5 kVA

Maximum transient current

2.3 A for 60 s

Power dissipation in W

32 W at nominal load

Speed range

1...50

Asynchronous motor control profile

factory set : constant torque
sensorless flux vector control with PWM type motor control signal

Electrical connection

Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5-2.5 mm² AWG 14
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 5-5 mm² AWG 10