Quantcast

Altivar 312 Variable Speed Drive, 0.37kW, 1kVA, 41W, 200..240V, 1 Phase Supply

Altivar 312 Variable Speed Drive, 0.37kW, 1kVA, 41W, 200..240V, 1 Phase Supply

Altivar 312 Variable Speed Drive, 0.37kW, 1kVA, 41W, 200..240V, 1 Phase Supply

Item Number: ATV312H037M2

Retail
N/A
RRP (Inc. GST)

Product Dimensions

Width icon

Width72 mm

Height icon

Height145 mm

Depth icon

Depth132 mm

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Altivar 312

Product or component type

variable speed drive

Product destination

asynchronous motors

Sustainable offer status

Green Premium product

Warranty

18 months

Physical

Supply

  • internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection
  • internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection
    • Communication port protocol

    • Modbus
    • CANopen
      • IP degree of protection

      • IP20 on upper part without cover plate
      • IP21 on connection terminals
      • IP31 on upper part
      • IP41 on upper part
        • Protection type

        • input phase breaks: drive
        • line supply overvoltage and undervoltage safety circuits: drive
        • line supply phase loss safety function, for three phases supply: drive
        • motor phase breaks: drive
        • overcurrent between output phases and earth (on power up only): drive
        • overheating protection: drive
        • short-circuit between motor phases: drive
        • thermal protection: motor
          • Insulation resistance

            >= 500 mOhm 500 V DC for 1 minute

            Local signalling

          • 1 LED (red) for drive voltage
          • four 7-segment display units for CANopen bus status
            • Connector type

              1 RJ45 for Modbus/CANopen

              Marking

              CE

              Height

              145 mm

              Width

              72 mm

              Depth

              132 mm

              Net weight

              1.5 kg

              Standards

            • IEC 61800-5-1
            • IEC 61800-3
              • Product certifications

              • UL
              • C-Tick
              • NOM
              • CSA
              • DNV
              • GOST
                • Relative humidity

                • 5-95 % without condensation conforming to IEC 60068-2-3
                • 5-95 % without dripping water conforming to IEC 60068-2-3
                  • Ambient air temperature for storage

                    -25-70 °C

                    Ambient air temperature for operation

                  • -10-50 °C without derating (with protective cover on top of the drive)
                  • -10-60 °C with derating factor (without protective cover on top of the drive)
                    • REACh Regulation

                      Reference contains Substances of Very High Concern above the threshold

                      EU RoHS Directive

                      Pro-active compliance (Product out of EU RoHS legal scope)

                      Mercury free

                      Yes

                      RoHS exemption information

                      Yes

                      China RoHS Regulation

                      X

                      Environmental Disclosure

                      ENVPEP110706EN

                      Circularity Profile

                      ENVEOLI100203EN

                      California proposition 65

                      WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

                      Others

                      Number of Units in Package 1

                      1

                      Number of Units in Package 2

                      4

                      Number of Units in Package 3

                      48

                      Package 1 width

                      17.4 cm

                      Package 2 Height

                      30 cm

                      Package 2 Length

                      40 cm

                      Package 2 width

                      30 cm

                      Package 3 Height

                      80 cm

                      Package 3 Length

                      60 cm

                      Package 1 Height

                      13.5 cm

                      Package 1 Length

                      18 cm

                      Package 3 width

                      80 cm

                      Unit Type of Package 1

                      PCE

                      Unit Type of Package 2

                      S03

                      Unit Type of Package 3

                      P06

                      Product specific application

                      simple machine

                      Assembly style

                      with heat sink

                      Component name

                      ATV312

                      Motor power kW

                      0.37 kW

                      Motor power hp

                      0.5 hp

                      [Us] rated supply voltage

                      200...240 V - 15...10 %

                      Supply frequency

                      50...60 Hz - 5...5 %

                      Network number of phases

                      single phase

                      Line current

                    • 5.3 A at 200 V, Isc = 1 kA
                    • 4.4 A at 240 V
                      • EMC filter

                        integrated

                        Apparent power

                        1 kVA

                        Maximum transient current

                        5 A for 60 s

                        Power dissipation in W

                        41 W at nominal load

                        Speed range

                        1-50

                        Asynchronous motor control profile

                      • factory set : constant torque
                      • sensorless flux vector control with PWM type motor control signal
                        • Electrical connection

                        • Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5-2.5 mm² AWG 14
                        • L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 2.5-2.5 mm² AWG 14
                          • Option card

                          • communication card for CANopen daisy chain
                          • communication card for DeviceNet
                          • communication card for Fipio
                          • communication card for Modbus TCP
                          • communication card for Profibus DP
                            • Supply voltage limits

                              170-264 V

                              Prospective line Isc

                              1 kA

                              Continuous output current

                              3.3 A at 4 kHz

                              Output frequency

                              0-500 kHz

                              Nominal switching frequency

                              4 kHz

                              Switching frequency

                              2...16 kHz adjustable

                              Transient overtorque

                              170-200 % of nominal motor torque

                              Braking torque

                            • 150 % during 60 s with braking resistor
                            • 100 % with braking resistor continuously
                            • 150 % without braking resistor
                              • Regulation loop

                                frequency PI regulator

                                Motor slip compensation

                              • automatic whatever the load
                              • suppressable
                              • adjustable
                                • Output voltage

                                  <= power supply voltage

                                  Tightening torque

                                • Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6-0.6 N.m
                                • L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 0.8-0.8 N.m
                                  • Insulation

                                    electrical between power and control

                                    Analogue input number

                                    3

                                    Analogue input type

                                  • AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm
                                  • AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm
                                  • AI3 configurable current 0...20 mA, impedance: 250 Ohm
                                    • Sampling duration

                                    • AI1, AI2, AI3: 8 ms analog
                                    • LI1...LI6: 4 ms discrete
                                      • Response time

                                      • AOV, AOC 8 ms for analog
                                      • R1A, R1B, R1C, R2A, R2B 8 ms for discrete
                                        • Linearity error

                                          +/- 0.2 % for output

                                          Analogue output number

                                          1

                                          Analogue output type

                                        • AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits
                                        • AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits
                                          • Discrete input logic

                                          • logic input not wired (LI1...LI4), < 13 V (state 1)
                                          • negative logic (source) (LI1...LI6), > 19 V (state 0)
                                          • positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)
                                            • Discrete output number

                                              2

                                              Discrete output type

                                            • configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
                                            • configurable relay logic: (R2A, R2B) NC - 100000 cycles
                                              • Minimum switching current

                                                R1-R2 10 mA at 5 V DC

                                                Maximum switching current

                                              • R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
                                              • R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
                                              • R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
                                              • R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms
                                                • Discrete input number

                                                  6

                                                  Discrete input type

                                                  (LI1...LI6) programmable at 24 V, 0-100 mA for PLC, impedance: 3500 Ohm

                                                  Acceleration and deceleration ramps

                                                • S, U or customized
                                                • linear adjustable separately from 0.1 to 999.9 s
                                                  • Braking to standstill

                                                    by DC injection

                                                    Time constant

                                                    5 ms for reference change

                                                    Frequency resolution

                                                  • analog input: 0.1...100 Hz
                                                  • display unit: 0.1 Hz
                                                    • Physical interface

                                                      RS485 multidrop serial link

                                                      Transmission frame

                                                      RTU

                                                      Transmission rate

                                                    • 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen
                                                    • 4800, 9600 or 19200 bps for Modbus
                                                      • Number of addresses

                                                      • 1-127 for CANopen
                                                      • 1-247 for Modbus
                                                        • Number of drive

                                                        • 127 for CANopen
                                                        • 31 for Modbus
                                                          • Operating position

                                                            vertical +/- 10 degree

                                                            Network frequency

                                                            47.5...63 Hz

                                                            Dielectric strength

                                                          • 2040 V DC between earth and power terminals
                                                          • 2880 V AC between control and power terminals
                                                            • Electromagnetic compatibility

                                                            • 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
                                                            • electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
                                                            • electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
                                                            • radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
                                                              • Pollution degree

                                                                2

                                                                Protective treatment

                                                                TC

                                                                Vibration resistance

                                                              • 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
                                                              • 1.5 mm (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
                                                                • Shock resistance

                                                                  15 gn for 11 ms conforming to EN/IEC 60068-2-27

                                                                  Operating altitude

                                                                • <= 1000 m without derating
                                                                • 1000...2000 m with current derating 1 % per 100 m
                                                                  • Package 1 Weight

                                                                    1.379 kg

                                                                    Package 2 Weight

                                                                    6 kg

                                                                    Package 3 Weight

                                                                    79.43 kg

                                                                    WEEE

                                                                    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                                                                    Show all specifications

                                                                    Documents & downloads

                                                                    hide show
                                                                    Filter items
                                                                    • All

                                                                    • Product Brochures

                                                                    • CAD Files and Packs

                                                                    • Technical Data Catalogues

                                                                    • Installation Instruction

                                                                    • Product Environmental

                                                                    • End of Life Manual

                                                                    • Handout

                                                                    • Data Bulletin

                                                                    • Operating Manuals

                                                                    • System User Guide

                                                                    • Certificates (MSDS)

                                                                    • Marine Certificate

                                                                    Frequently Asked Questions

                                                                    hide show

                                                                    Do we have CAD drawings for the ATV312 drives?

                                                                    Issue:
                                                                    Getting CAD drawings for the ATV312 drives

                                                                    Product Line:
                                                                    Altivar ATV312 and ATV31

                                                                    Environment:
                                                                    All

                                                                    Cause:
                                                                    Cad drawings

                                                                    Resolution:
                                                                    Use the following link to the CAD Drawings Catalog.

                                                                    https://www.schneider-electric.us/sites/us/en/support/product-support-resources/3d-cad.page


                                                                    CTA-ID : 2061638

                                                                    Can the ATV312 be powered by an external 24V only?

                                                                    Issue:
                                                                    Powering the ATV312 by an external 24Vdc only

                                                                    Product Line:
                                                                    Altivar 312

                                                                    Environment:
                                                                    All

                                                                    Cause:
                                                                    Installation/programming
                                                                     
                                                                    Resolution:
                                                                    No, this drive must have line voltage applied. The voltage must be within -15% to +10% of the rated line voltage. 

                                                                     

                                                                    Do any of the ATV31 drives Not have an internal fan ?

                                                                     

                                                                    Issue:   Do any of the ATV31 drives Not have an internal fan ?
                                                                     
                                                                    Product Line:   ATV31
                                                                     
                                                                    Environment:  ATV31H018M2 & ATV31H018M2A & ATV31H018M3X & ATV31H018M3XA
                                                                    ATV31H037M2 & ATV31H037M2A & ATV31H037M3X & ATV31H037M3XA
                                                                    ATV31H055M2 & ATV31H055M2A & ATV31H055M3X & ATV31H055M3XA
                                                                    ATV31H075M2 & ATV31H075M2A & ATV31H075M3X & ATV31H075M3XA
                                                                     
                                                                    Cause:   No heatsink fan
                                                                     
                                                                    Resolution:   Yes, the following do not have a heatsink fan:
                                                                    ATV31H018M2 & ATV31H018M2A & ATV31H018M3X & ATV31H018M3XA
                                                                    ATV31H037M2 & ATV31H037M2A & ATV31H037M3X & ATV31H037M3XA
                                                                    ATV31H055M2 & ATV31H055M2A & ATV31H055M3X & ATV31H055M3XA
                                                                    ATV31H075M2 & ATV31H075M2A & ATV31H075M3X & ATV31H075M3XA

                                                                    Are drive thermal output ratings available in BTU?

                                                                    Issue:
                                                                    Are drive thermal output ratings available in BTU?

                                                                    Product Line:
                                                                    Altivar Machines

                                                                    Environment:
                                                                    All

                                                                    Cause:
                                                                    Documentation

                                                                    Resolution:
                                                                    Heat dissipation is listed in Watts only.
                                                                    See the drive catalog or installation guide for details on the heat dissipation.
                                                                    1 watt is approximately 3.41 BTU/h
                                                                    1000 BTU/h is approximately 293 W


                                                                     

                                                                    What is the part number for the remote keypad for the ATV31?

                                                                    Issue:   
                                                                    Remote keypad for the ATV31.
                                                                     
                                                                    Product Line: 
                                                                     ATV31
                                                                     
                                                                    Environment:
                                                                     All
                                                                     
                                                                    Cause:  
                                                                    Remote keypad kit
                                                                     
                                                                    Resolution:   
                                                                    The Altivar 31 remote mount keypad kit is VW3A31101.
                                                                    The kit includes a keypad, mounting hardware and a 3 meter cable.


                                                                     

                                                                    Is there a password to protect parameters in the ATV31 drive?

                                                                    Issue:   
                                                                    Programming password to protect/block parameters in the ATV21 Drive.
                                                                     
                                                                    Product Line:   
                                                                    ATV31
                                                                     
                                                                    Environment:  
                                                                    All
                                                                     
                                                                    Cause:  
                                                                    Password
                                                                     
                                                                    Resolution:   
                                                                    Yes.
                                                                    In the SUP menu, the COd parameter can be used to enter a numerical code that restricts access to adjustment parameters in the drive.  Only the display parameters are accessible, with only a temporary choice of the parameter displayed.

                                                                     
                                                                    Show More