Frequently Asked Questions
For both the START TIME and STOP TIME dials, setpoint A is 1second and setpoint E is 10seconds. There is a linear relationship from A to E setpoints.
For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage. There is a linear relationship from A to E setpoints.
Start ATS01N2...LU, QN, RT without control wires.
Altistart 01 Soft Starters with "LU", "QN", or "RT" at the end of the part number
Need to start the Soft Starter with power up
Add a jumper between terminals LI+ and LI2. This provides a continuous RUN command. When power is supplied to the ATS01, it will immediately begin to start the motor. Removing power will result in a freewheel stop.
Does the ATS01 have an internal shorting contactor?
All of the ALTISTART 01 models, except the ATS01N103FT and ATS01N106FT, have an internal shorting contactor as standard.