Quantcast

Dry Contact I/O SmartSlot Card

Dry Contact I/O SmartSlot Card

Dry Contact I/O SmartSlot Card

Item Number: AP9613

Retail
$350.30
RRP (Inc. GST)

Product Dimensions

Width icon

Width12.1 cm

Height icon

Height3.8 cm

Depth icon

Depth11.4 cm

See full specifications

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Warranty

2 years repair or replace

Physical

Provided equipment

  • user manual
  • USB cable
    • Depth

      11.4 cm

      Height

      3.8 cm

      Net weight

      0.21 kg

      Mounting mode

      not rack-mountable

      Width

      12.1 cm

      Standards

    • EN 55022 class A
    • EN 55024
    • EN 61000-3-2
    • EN 61000-3-3
    • EN 61000-4-2
    • EN 61000-4-3
    • EN 61000-4-4
    • EN 61000-4-6
    • FCC part 15 class A
      • Ambient air temperature for operation

        0-40 °C

        Relative humidity

        0-95 %

        Ambient air temperature for storage

        -15-65 °C

        EU RoHS Directive

        Under investigation

        Mercury free

        Yes

        RoHS exemption information

        Yes

        Environmental Disclosure

        ENVPEP1512011_V1

        Circularity Profile

        ENVEOLI1512011_V1

        Others

        Additional specification

        dry contact management

        Power supply type

        self powered via SmartSlot

        Number of rack unit

        0U

        Operating altitude

        0...10000 ft

        Storage Relative Humidity

        0-95 %

        Storage altitude

        0-50000 ft

        Lead free

        Yes

        WEEE

        The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

        Halogen content performance

        Halogen free product
        Show all specifications

        Frequently Asked Questions

        hide show

        Where can I get support for APC and MGE Products?

        For support on APC and MGE products please visit:  https://www.apc.com/support/

        AC Power
        Additional Management Cards and Options
        Air Cooled Chillers
        Air Distribution Accessories
        Airflow Management
        AIS 3000
        AIS 5000
        AIS Accessories
        AIS Battery Systems
        APC CS
        APC Enterprise Manager
        APC ES
        APC RS
        Application Shutdown Utilities
        Assessment Services
        Auto and Air Inverters
        AV Accessories
        AV Power Conditioners & Battery Backups
        AV Power Filters
        AV Pro Interconnects
        AV Surge Protectors
        Backpacks and Messenger Bags
        Back-UPS
        Back-UPS Accessories
        Back-UPS BI
        Back-UPS CS
        Back-UPS ES
        Back-UPS HI
        Back-UPS HT
        Back-UPS LS
        Back-UPS Office
        Back-UPS Pro
        Back-UPS RS
        Back-UPS XS
        Basic Rack PDU
        Battery Management
        Battery Replacement Services
        Biometric Security
        Bulk Cable
        Cabinet Power Distribution
        Cable Management
        Charge-UPS EX
        Commercial/Industrial Surge Suppression
        Condensers
        Configurable Power Accessories
        Configurable Power Distribution
        Console Port Servers
        CyberFort
        Data Center Facility Cooling - Andover Continuum or TAC Vista
        Data Center Facility Power - PowerLogic ION Enterprise
        Data Center Software Integration Kits
        Data Center University
        Data Distribution Cable
        DC Battery
        DC Components
        DC Distribution Components
        DC600
        Desktop KVM
        Desktop Notebook Stands
        EcoBreeze Air Economizers
        Environmental Management System
        Environmental Monitoring Unit
        Ethernet Switches
        Extended Warranties
        Fiber Optics
        Firmware Upgrades
        FLM Series
        Fluid Coolers
        FRP/Ferroresonant Power Supply
        Game Console Surge Protection
        Gender Changers
        Global Deployment
        Hardwire Surge Suppression Accessories
        High-Density Cooling Enclosures
        IDE Cables
        IEEE1394
        Industrial
        InfraStruxure for Large Data Centers
        InfraStruxure for Medium Data Centers
        InfraStruxure for Server Rooms
        InfraStruxure for Small Data Centers
        InfraStruxure for Wiring Closets
        InfraStruxure Manager
        InfraStruxure Type A
        InRoom Direct Expansion
        InRow Chilled Water
        InRow Direct Expansion
        InRow Pumped Refrigerant
        Installation Services
        Interface Cables
        International Plug Adapters
        Keyboard
        KVM Switches
        Laptop Power Adapters
        Line-R
        Magnum VS
        Magnum XS
        Magnum XS Rectifier
        Maintenance Bypass Panels
        Management Platform Integration
        Matrix Battery Systems
        Matrix-UPS
        Matrix-UPS Accessories
        Metered Rack PDU
        Metered-by-Outlet Rack PDU
        MGE Accessories
        MGE Alpes
        MGE Battery Systems
        MGE Comet
        MGE EPS
        MGE EPS 6000
        MGE EPS 7000
        MGE EPS 8000
        MGE Galaxy
        MGE Galaxy 300
        MGE Galaxy 3000
        MGE Galaxy 3500
        MGE Galaxy 4000
        MGE Galaxy 5000
        MGE Galaxy 5500
        MGE Galaxy 6000
        MGE Galaxy 7000
        MGE Galaxy 9000
        MGE Galaxy PW
        MGE Legacy
        MGE Service Bypass
        MGE Sinewave
        MGE Static Transfer Switches
        MGE UPS 4000
        Microsol Estabilizadores
        Microsol Modules Isoladores
        Mobile Notebook Stands
        Modular Components
        Modular Power Accessories
        Modular Power Distribution
        Monitor
        Mounting Hardware
        Mouse
        MRC1800
        MRE2400
        Multimedia
        MWF1700
        NetBotz 200
        NetBotz 300
        NetBotz 400
        NetBotz 500
        NetBotz Access Control
        NetBotz Accessories and Cables
        NetBotz Central
        NetBotz Rack Access
        NetBotz Sensors
        NetShelter CX
        NetShelter EP Enclosures
        NetShelter ES Enclosures
        NetShelter Open Frame Rack Accessories
        NetShelter SX
        NetShelter VL
        NetShelter VS Enclosures
        NetShelter VX Enclosures
        Network Integration Services
        Network Patch Cables
        NetworkAIR Accessories
        NetworkAIR AFX
        NetworkAIR CM
        NetworkAIR CW
        NetworkAIR FM
        NetworkAIR IR
        NetworkAIR TC
        Notebook Security
        On Site Service
        Open Frame Racks
        Operations Capacity
        Operations Change
        Operations Energy Cost
        Operations Energy Efficiency
        Operations Insight
        Operations Mobile
        Operations VIZOR
        Outdoor Enclosures
        Panelmount Environmental Monitoring
        Parallel
        Patch Panels
        PC1200
        Planning Tools and Publications
        Portable Cooling
        Power Cords
        Power Distribution Units
        Power Generation Systems
        Power Ready Notebook Cases
        PowerChute Business Edition
        PowerChute Inventory Manager
        PowerChute Network Shutdown
        PowerChute Personal Edition
        PowerChute plus
        PowerManager
        PowerShield
        Preventive Maintenance
        Project Management Services
        ProtectNet
        Rack Air Distribution
        Rack Components
        Rack LCD Consoles
        Rack PDU Accessories
        Rack-mount Transfer Switches
        Refrigerant Distribution
        Remote Monitoring Services
        Replacement Batteries
        Replacement Notebook Batteries
        Residential Hardwire Surge Suppression
        Retail
        Retractable Cables
        Room Air Distribution
        Room Cooling Accessories
        Router Cables
        Row Cooling Accessories
        SCSI
        Security Cameras
        Sensors
        Serial
        Service Bypass Panel
        Service Plans
        Silcon
        Silcon Accessories
        Silcon Battery Systems
        SLM/FLM Series
        SmartSlot Expansion Chassis
        Smart-UPS
        Smart-UPS Accessories
        Smart-UPS Battery Systems
        Smart-UPS DP
        Smart-UPS On-Line
        Smart-UPS RT
        Smart-UPS VT
        Software Configuration
        Software Education
        Software for NetBotz Appliances
        Software Installation
        Software Integration
        Spare Part Kits
        Specialty Enclosures
        Start-Up Service
        Stationary Power Distribution Units
        Step-Down Transformer
        StruxureWare Central
        StruxureWare Operations Suite
        SurgeArrest Essential
        SurgeArrest Home/Office
        SurgeArrest Notebook
        SurgeArrest Performance
        Switch Boxes
        Switched Rack PDU
        Symmetra
        Symmetra Accessories
        Symmetra Battery Systems
        Symmetra MW
        Symmetra MW Accessories
        Symmetra Power Module
        Symmetra PX
        Symmetra PX Accessories
        Sync and Charge Cables
        Thermal Containment
        Thick and Thin Ethernet
        Token Ring
        Toploading Cases
        Traditional Cases
        Training Services
        Transceivers
        Transportation
        Travel Mice
        TSP Accessories
        TSP Battery
        TSP/Generator
        TSP/Total System Power
        Tune-UPS for Symmetra
        Uniflair Chilled Water
        Universal Mobile Device Batteries
        Universal Notebook Batteries
        Universal Notebook Power Adapter
        Universal Power Accessories
        Universal Power Adapters
        UPS Network Hub Card
        UPS Network Management Cards
        USB Adapters & Converters
        USB Cables
        USB Charging Cables
        USB Hubs
        Wall-mount Transfer Switches
        Wheeled Cases
        Wireless
        Wizards and Configurators
        WS200

        MGE RASP; Panel wiring for APC Products with the AP9610 or AP9613 Relay cards

        Issue:
        MGE RASP; Panel wiring for APC Products with the AP9610 or AP9613 Relay cards

        Product line:
        MGE RASP Panel

        Environment:
        All models/ All serial numbers

        Cause:
        Instruction on MGE RASP (Remote Alarm Status Panel) Panel wiring for APC Products with the AP9610 or AP9613 Relay cards

        Resolution:
        MGE RASP Panel wiring for APC Products with the AP9610 or AP9613 Relay cards

        Refer to attached file for more details.

         
         

        Which SmartSlot accessories are supported by the Galaxy 3500 (G3500) UPS?



        Issue

        Which SmartSlot accessories are supported by the Galaxy 3500 (G3500) UPS?


        Product Line
         
        • Data Center and Facility 3 Phase UPS
          • MGE Galaxy 3500 models

        Environment
         
        • All serial numbers
        • All firmware versions unless otherwise noted

        Cause

        The list below details what accessories are supported by the Galaxy 3500 UPS (G3500) and what measures must be taken to utilize them.


        Resolution


         
        • Network Management Card 2 - AP9630/30CH, AP9631/31CH


        The APC Network Management Card 2 SKUs AP9630/30CH and AP9631/31CH can be utilized with the G3500 UPS. The Network Management Card must be loaded with the sumx firmware application 5.0.3 or higher. The AP9631 ships with the G3500 UPS.

        The AP9810 Relay I/O dongle can also used with the AP9631 Network Management Card 2 to have dry contact functionality - (2) inputs, (1) output per AP9810 with a maximum of (2) AP9810 that can be attached.
         

        • Building Management Card (BMS) - AP9622


        The AP9622 BMS card is supported in the G3500 UPS. It can utilize some of the 3-phase Symmetra bit register/modbus map, which can be found on the AP9622 product page, but other registers may not report properly if you are not in a 3:3 configuration.

         

        • Dry Contact I/O SmartSlot Card - AP9610 or AP9613


        The AP9610 or AP9613 is supported in the G3500 UPS. For AP9610 (or AP9613 utilizing dip switch configurations only) you must use Configuration 2, as mentioned in knowledge base FA156152.  Alternatively, Configuration 4 and the onboard configuration utility can be utilized on the AP9613.

        Unfortunately, if you use the included APC accessory terminal screw board with the AP9610, the front panel/UPS door will not close correctly. In order to avoid this issue, there are a few options you can look into.

        1.) Purchase a right angle DB25 Male-Female interconnection

        2.) Utilize an APC AP9600 single slot SmartSlot expansion chassis and extend the cable to the AP9600 with a 940-1500 serial cable. This communication cable can be routed so that the chassis can sit on top of the UPS. If using an AP9600, the NMC AP9630 or AP9631 should be in the AP9600 expansion chassis and the AP9610 should be in the SmartSlot in the UPS frame. This is the proper installation order per knowledge base article ID FA156034. (Note: This required installation order also applies to AP9613.)

        3.) Use an AP9604 SmartSlot triple chassis which comes with a 10' cable. This communication cable can be routed so that the chassis can sit on top of the UPS. Also, if do not want to use the included accessory board, you can make your own cable, using the pinout in the AP9610 user's guide and avoid buying a right angle 25 pin extension cable.

        4.) If using both an NMC and AP9610 or AP9613, put both the put the AP9610 or AP9613 and the NMC2 in the AP9604 triple chassis, referencing the correct installation order mentioned in knowledge base article ID FA156034 to ensure proper function of both the NMC2 and AP9610 or AP9613.
         

        • SmartSlot Serial Interface Expander - AP9607, AP9607CB, AP9624


        The SmartSlot serial interface expander can be used with the G3500 to supply two dedicated simple signaling ports, such as for use with an AS/400 or an IBM iSeries, if required.

        The Interface Expander 2 (AP9624) is also supposed by the G3500 and was released in mid-2014 to replace AP9607 and AP9607CB.
         



         

        AP9613 Dry Contact I/O SmartSlot Card "Legacy Fault" Definition


        Issue

        What do the Legacy Faults refer to within the AP9613 Dry Contact I/O SmartSlot Configuration Utility?





        Product Line

        • UPS Device Management
          • AP9613 - Dry Contact I/O SmartSlot Card
        Environment
        • All serial numbers
        • All firmware versions

        Cause

        These legacy fault options carry over from the AP9610 Relay I/O SmartSlot Card and the three configurations available with that older card for output #6. These are intended to be configurable for the AP9613 as well, especially for environments with both AP9610 and AP9613 cards. Further explanation below.


        Resolution

        The "Fault Legacy" items within the Dry Contact I/O SmartSlot Card Configuration Utility refer to the "legacy" configurations available for Output #6 in Configuration #1, #2, or #3 with the from the older AP9610 Relay I/O SmartSlot Card. Using Fault Legacy 1, 2, or 3 should be used if you are trying to mimic the behavior of the older AP9610 Output #6 in either configuration #1, #2, or #3. 

        Since AP9610 is only supported older style UPS-Link model units, legacy faults (which may be different across different UPS models) only work with those types of units where as "Fault" should be more used with newer Micro-link UPSs where you do not necessarily want to mimic output #6's behavior on AP9610.

        Attached to this knowledge base are the fault definitions used by either UPS-Link or Micro-link style UPSs respectively that would be considered Fault.

        Figure 1: Available Configurations from the discontinued AP9610 Relay I/O SmartSlot Card.




        Some examples of Legacy Faults may include an overload, hardware bypass, or battery charger failure - as defined above.

        Dry Contact I/O Options FAQ



        Issue

        This FAQ document will provide answers to commonly-asked questions by sales, channel partners and tech support regarding the AP9810 APC Dry Contact I/O Accessory for the AP9631 UPS Network Management Card 2 with Environmental Monitoring. References also include the older, discontinued AP9610 Dry Contact I/O SmartSlot card and the current Dry Contact I/O SmartSlot Card, AP9613.



        Product Line
        • UPS Device Management
          • AP9631/AP9631CH - UPS Network Management Card 2
          • AP9810 - Dry Contact I/O Accessory
          • AP9610 - Relay I/O SmartSlot Card (discontinued)
          • AP9613 - Dry Contact I/O SmartSlot Card

        Environment
        • All installations unless otherwise specified


        Cause

        This FAQ is provided for reference.



        Resolution

        Review the FAQ listed below.


        What UPS Network Management Card is compatible with the Dry Contact I/O Accessory?
        The Dry Contact I/O Accessory is compatible with the AP9631 UPS Network Management Card 2 with Environmental Monitoring. The AP9635 UPS Network Management Card 2, exclusive to the Symmetra PX 250/500kVA and certain Galaxy units also have some support.


        Is the Dry Contact I/O Accessory included with the AP9631 UPS Network Management Card 2?
        No, the AP9810 Dry Contact I/O Accessory is sold separately.


        Does the AP9810 Dry Contact I/O Accessory replace the older AP9610 Relay I/O SmartSlot Card or newer AP9613 Dry Contact I/O SmartSlot Card?
        No, the AP9610 Relay I/O SmartSlot Card, if available, is still an option for supported UPSs but is now discontinued and replaced by the AP9613 Next Generation Relay I/O Card.


        What are the differences between the AP9810 Dry Contact I/O Accessory and AP9613Dry Contact I/O SmartSlot Card?
        The AP9810 is a add-on Dry Contact I/O Accessory which can be used in conjunction with the AP9631 UPS Network Management Card or the AP9613 Dry Contact I/O SmartSlot Card. The AP9610 and AP9613 are standalone Dry Contact I/O SmartSlot Cards.
         

         Accessory or Device

         Outputs

         Inputs

        (1) Dry Contact I/O Accessory (AP9810) with UPS NMC 2 (AP9631)

        1

        2

        (2) Dry Contact I/O Accessory (AP9810) with UPS NMC 2 (AP9631)*

        2

        4

        Dry Contact I/O SmartSlot Card (AP9613)

        6

        4

        Dry Contact I/O SmartSlot Card (AP9613) with (1) Dry Contact I/O Accessory (AP9810) 7 6
        Dry Contact I/O SmartSlot Card (AP9613) with (2) Dry Contact I/O Accessory (AP9810) 8 8


        *
        Note:
        If you are using PowerChute Network Shutdown (PCNS) and if your NMC2 has two universal I/O ports, you must connect the Dry Contact I/O Accessory to Universal I/O Port 2. PCNS only supports one Dry Contact I/O Accessory yet you can still have two connected at a time - PCNS only sees the second one.



        What is the maximum length Ethernet cable that can be used between the AP9810 and AP9631 UPS NMC?
        1000 feet


        How do I approach the configuration of this accessory via the Network Management Card web interface?

        The AP9810 accessory configuration (called Control Policy) is located in two places within the web interface.


        For firmware v5.X.X


        1.) The Environmental Tab contains default relay states and is where you can control the relays at any given time.

        2.) Click on the UPS Tab->Control Policy subheading and that is where you can map UPS control actions that pertain to the relay states, etc. Please refer to these instructions for configuration.

        3.) The config.ini configuration file items that pertain to the Device Control Policy begin with DCP. For example, DCP0343_2A=ups -c On, -rc 2 close.


        For firmware v6.X.X

        1.) Click on the Configuration->Universal I/O->Input Contacts or Output relays respectively which contains default relay states and is where you can control the relays at any given time.

        2.) Click on Configuration->Universal I/O->Control Policy and that is where you can map UPS control actions that pertain to the relay states, etc. Please refer to these instructions for configuration.

        3.) The config.ini configuration file items that pertain to the Device Control Policy begin with DCP. For example, DCP0343_2A=ups -c On, -rc 2 close.

         

        Note: The Network Management Card 2 must have application firmware (sumx, sy, sy3p, sypx) v5.1.5 or greater to work properly. For details on upgrading the Management Card 2 firmware, see the user’s guide on the Network Management Card Utility CD or on the APC Web site (www.apc.com).

        For more information, please reference the AP9810 user's guide or the AP9613 user's guide.

         

        What UPS units are officially supported by the AP9613 (Dry Contact I/O SmartSlot Card)?


        Issue

        What UPS units are officially supported by the AP9613 (Dry Contact I/O SmartSlot Card)?


        Product Line
         
        • UPS Device Management
          • AP9613 - Dry Contact I/O SmartSlot Card
        • Various APC UPS Models - single and three phase

        Environment
        • AP9613
        • Supported UPS models listed below
           
        Cause

        The user is unsure if the AP9613 is supported in their device or AP9613 is not working properly and compatibility is not confirmed.


        Resolution

        The following UPS lines have been officially tested with the AP9613 Dry Contact I/O Card by APC:
         
        1.  Smart-UPS Model Types with the following prefix:  
          1. SU
          2. SUA 
          3. SURT
          4. SURTA
          5. SURTD
          6. SUVT/Galaxy 3500 (Must use Configuration #2 - same as Symmetra)
          7. SUM
          8. SMT
          9. SMX
          10. SRC
          11. SRT (requires AP9613 v2.1.0 and higher)
         
        1.  All single phase Symmetra Model Types including:
          1. Symmetra
          2. Symmetra RM
          3. Symmetra LX
         
        1. Certain three phase Symmetra PX Model Types including:
          1. 20kW Symmetra PX All-In-One
          2. 40kW Symmetra PX
          3. 80kW Symmetra PX
          4. 48kW Symmetra PX All-In-One
          5. 100kW Symmetra PX
          6. 160kW Symmetra PX



        Please note: The AP9613 is intended to support the above UPS models which consist of both UPS-Link and Micro-link communication types. All other SmartSlot enabled UPS models may work in conjunction with the AP9613, however, these models have not been officially tested by APC. 

         

        Show More