755RFB2_angle_image
755RFB2_bottom_image
755RFB2_top_image
755RFB2
755RFB2_angle_image
755RFB2_bottom_image
755RFB2_top_image
755RFB2

W/less base for 230V smoke alarm, MK2

Catalogue Number: 755RFB2
755RFB2_angle_image
755RFB2_bottom_image
755RFB2_top_image
755RFB2
755RFB2_angle_image
755RFB2_bottom_image
755RFB2_top_image
755RFB2
Retail
$132.94
RRP (Inc. GST)

Specifications

hide show
Range
Firetek
Product brand
Clipsal
Product or component type
mounting base
Device application
mounting
[Us] rated supply voltage
220...240 V AC 50 Hz
[Ie] rated operational current
60 mA maximum
Backup type
battery
Battery type
sealed rechargable
Battery life
10 year(s)
Transmission frequency
433.42 MHz
Number of devices
  • 40 for wireless alarm
  • 40 for wired alarm wired over <= 150 m
    • Operating distance
    • 30 m indoor use line of sight
    • 100 m in free field
      • Remote control type
        Dry contact momentary switch for test/hush function with max. cable length 20 m
        Time delay range
        2 min (pairing)
        Connections - terminals
      • For line: screw terminal with 2 x 1.5 mm² wiring capacity
      • For neutral: screw terminal with 2 x 1.5 mm² wiring capacity
      • For earth loop: screw terminal with 2 x 1.5 mm² wiring capacity
      • For interconnect: screw terminal with 2 x 1.5 mm² wiring capacity
      • For TEST: screw terminal with 2 x 1.5 mm² wiring capacity
      • For hush: screw terminal with 2 x 1.5 mm² wiring capacity
      • For common: screw terminal with 2 x 1.5 mm² wiring capacity
        • Local signalling
          flashing: 1 LED (red) 10 s for low battery
          Type of installation
          indoor
          Fixing center
          84 mm
          Diameter
          140 mm
          Ambient air temperature for operation
          0-45 °C
          Relative humidity
          5-95 %
          Product certifications
        • Activfire
        • RCM
          • Standards
          • AS/NZS 60065
          • AS/NZS 60950.1
          • AS/NZS 4268
            • Package 1 Weight
              122 g
              Package 1 Height
              145 mm
              Package 1 width
              33 mm
              Package 1 Length
              145 mm
              Sustainable offer status
              Green Premium product
              REACh free of SVHC
              Yes
              EU RoHS Directive
              Compliant
              Mercury free
              Yes
              RoHS exemption information
              Yes
              China RoHS Regulation
              X
              Environmental Disclosure
              ENVPEP1907002EN
              Circularity Profile
              ENVEOLI1907002EN

              Frequently Asked Questions

              hide show

              Can multiple 755PSMA4 smoke detectors in a single wired circuit be controlled via a single relay base 755RFB2?

              Multiple smoke detectors cannot be controlled via one relay base, multiple relay bases are required, one for each 755PSMA4 detector. 755RFB2 relay bases can be connected together in a single control circuit for control from one location.

              How do you Interconnect a 755RFB2 smoke alarm bases with a 755LPSMA4 smoke alarm?

              See the below "How to video".

              The part number for the products seen in this video is a 755RFB2 base and a 755LPSMA4 smoke alarm.

              For further information please visit 
              Smoke alarm: https://www.clipsal.com/products/detail?CatNo=755LPSMA4&tab-document-1=1
              Wireless base: https://www.clipsal.com/products/detail?CatNo=755RFB2&tab-document-1=1

              Can you use the 755RFB across circuits and phases?

              Yes you can use the 755RFB across circuits and phases.

              What is the 755RFB used for?

              The 755RFB is a replacement base for the 755PSMA2 which is used to interconnect wirelessly to other smoke alarms.

              What is the RF range for 755RFB base?

              RF Range (line of sight) will be: 100m free air, 30m indoors

              Will 755RFB relay base work with 755PSMA?

              Unfortunately not, 755RFB is not suitable for use with 755PSMA. It is suitable for use with 755PSMA2 and 755PSMA4. 

              For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=755RFB



               

              Can the 755RFB be used for both wired and wireless interconnection?

              Yes, the Wireless base is capable of interconnecting 20 smoke alarms wirelessly using 755RFB bases and 40 smoke alarms using wired interconnect cables simultaneously. The 755RFB can be used as a wireless bridge between smoke alarms on different circuits or phases (that normally CAN NOT be connected together via conventional wired interconnect).

              Will the 755RFB be able to operate with 5 bases and 5 x 755RLPSMA2's?

              The 755RFB base will operate the same with a 755RLPSMA2 as it will with the 755PSMA2

              For further information, visit the link below:-
              https://www.clipsal.com/Trade/search-results?q=755RFB
              User-added image

              What interconnectable smoke alarms does Clipsal offer?

              All our smoke alarms are interconnectable to one another by wire , for our range of 755PSMA2 alarms we can also offer a wireless interconnect relay 755RFB.

              How do you test the Interconnection of a 755RFB2 base with a 755PSMA4 smoke alarm?

              See the below "How to video".



              The part number for the products seen in this video is a 755RFB2 base and a 755PSMA4 smoke alarm.
              Key Features & Specifications:
              Electronic sensor type photo-electric sensor
              [Us] rated supply voltage 220...240V AC 50 Hz
              Backup type battery
              Battery life 1 year(s)
              Output voltage limits interconnection: 6.5...20 V
              Noise level 85 dB at 3 m, minimum
              Connections - terminals
              • (line) - 2 x 1.5 mm²
              • (neutral) - 2 x 1.5 mm²
              • (earth loop) - 2 x 1.5 mm²
              • (interconnect) - 2 x 1.5 mm²
              Standards
              • ISO 8201
              • AS 3786:2014
              • AS/NZS 60950.1
              • AS/NZS 60065


              For further information please visit 
              Smoke alarm: https://www.clipsal.com/products/detail?CatNo=755PSMA4&tab-document-1=1
              Wireless base: https://www.clipsal.com/products/detail?CatNo=755RFB2&tab-document-1=1

              How do you test the Interconnection of a 755RFB2 base with a 755PSMA4 smoke alarm?

              See the below "How to video".



              The part number for the products seen in this video is a 755RFB2 base and a 755PSMA4 smoke alarm.
              Key Features & Specifications:
              Electronic sensor type photo-electric sensor
              [Us] rated supply voltage 220...240V AC 50 Hz
              Backup type battery
              Battery life 1 year(s)
              Output voltage limits interconnection: 6.5...20 V
              Noise level 85 dB at 3 m, minimum
              Connections - terminals
              • (line) - 2 x 1.5 mm²
              • (neutral) - 2 x 1.5 mm²
              • (earth loop) - 2 x 1.5 mm²
              • (interconnect) - 2 x 1.5 mm²
              Standards
              • ISO 8201
              • AS 3786:2014
              • AS/NZS 60950.1
              • AS/NZS 60065


              For further information please visit 
              Smoke alarm: https://www.clipsal.com/products/detail?CatNo=755PSMA4&tab-document-1=1
              Wireless base: https://www.clipsal.com/products/detail?CatNo=755RFB2&tab-document-1=1

              Can the Clipsal 755PSMA2 smoke alarms be on separate circuits?

              Yes, use the 755RFB wireless interconnect base.
              Please follow the link for product information:
              https://www.clipsal.com/Trade/Products/ProductDetail?catno=755RFB

               
              Show More