Clipsal - Smoke Alarms Photoelectric Smoke Alarm Surface Mount, 220-240V a.c. Mains Power w. 9V d.c. Battery Backup
Item Number: 755PSMA4
755PSMA4 Photoelectric smoke alarms helps in early detection of smouldering fires, the most common and highest risk type of fire in homes. It can be used as a single mains powered battery backed (with 9 V d.c.) alarm or can be interconnected with other 755 series smoke alarms to give complete home protection.
Datasheet
Specifications
Design
Range
Product brand
Product or component type
Device application
Physical
Type of packing
Supply
Function available
- local alarm
- hush function
- self-test of smoke detection
Control type
Operating distance
- 50 m line of sight
- 140 m in free field
Local signalling
- visual: 1 LED (red) for warning and low battery
- visual: 1 LED (green) for ON status
- sound: signal
- sound: alarm
Connections - terminals
- screw terminal (line) - 2 x 1.5 mm²
- screw terminal (neutral) - 2 x 1.5 mm²
- screw terminal (earth loop) - 2 x 1.5 mm²
- screw terminal (interconnect) - 2 x 1.5 mm²
Type of installation
Device mounting
Mounting support
- ceiling
- wall-mount
Fixing mode
Height
Ip degree of protection
Ambient air temperature for operation
Ambient air temperature for storage
Relative humidity
Product certifications
- RCM
- SAI
- Activfire
Standards
- ISO 8201
- AS 3786:2014
- AS/NZS 60950.1
- AS/NZS 60065
Mercury free
Rohs exemption information
Environmental disclosure
Eu rohs directive
Reach regulation
China rohs regulation
Material
Material
Others
Legacy weee scope
Package 1 bare product quantity
Average percentage of recycled plastic content
Weee label
Weee applicability
Electronic sensor type
[us] rated supply voltage
Battery life
Output voltage limits
Type of alarms
Detection type
Number of devices
Response time
Noise level
Time delay range
- 10 min (hush)
- 10 h (do not disturb)
Diameter
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Green premium status for reporting
Total lifecycle carbon footprint
Carbon footprint of the manufacturing phase [a1 to a3]
Carbon footprint of the manufacturing phase [a1 to a3]
Carbon footprint of the distribution phase [a4]
Carbon footprint of the distribution phase [a4]
Carbon footprint of the installation phase [a5]
Carbon footprint of the installation phase [a5]
Carbon footprint of the use phase [b2, b3, b4, b6]
Carbon footprint of the use phase [b2, b3, b4, b6]
Sustainable packaging
Carbon footprint of the end-of-life phase [c1 to c4]
Carbon footprint of the end-of-life phase [c1 to c4]
Take-back
Product contributes to saved and avoided emissions
Removable battery
Total lifecycle carbon footprint
Average percentage of recycled metal content
Packaging made with recycled cardboard
Packaging without single use plastic
End of life manual availability
Take-back
Warranty (in months)
Documents & downloads
hide show-
All
-
Product Brochures
-
Other technical guide
-
Installation Instruction
-
End of Life Manual
-
Environmental Disclosure
-
Operating Manuals
-
Certificates (MSDS)
-
Declaration of Conformity (Sustainability)
755RB Smoke Alarm Mounting Base Instructions
VERSION
1.0
DATE
29 Feb 2024
REVISION
1.0
Smoke Alarms - General Information
VERSION
1.0
DATE
29 Sep 2023
REVISION
1.0
755PSMA2 Smoke Alarm Instructions
VERSION
1.0
DATE
02 Aug 2022
REVISION
1.0
755PSMA4 Smoke Alarm Instructions
VERSION
1.0
DATE
02 Aug 2022
REVISION
1.0
Frequently Asked Questions
What causes the smoke alarm to continuously beep ?
Hide ShowPlease follow the regular maintenance check to avoid this.
Vacuum the smoke alarms using a soft brush attachment-
Keeping your smoke alarm free of dust particles, dirt, kitchen grease or cobwebs will help you reduce false alarms and ensure any smoke can easily reach the internal sensing chamber.
Clean and wipe down around unit-
Clean around the smoke alarm unit and remove any insects or other contamination which may have occurred. Spray bug repellent on a cloth and wipe the ceiling around the smoke alarm to act as a future bug deterrent. Clean every 3-6 months to mitigate insect ingress.
ALWAYS TEST THE SMOKE ALARM AFTER CLEANING.
Attached is the Clipsal smoke alarm troubleshooting guide for more info.
How to troubleshoot 755PSMA4 Smoke Alarm if it is beeping after replacing the battery ?
Hide ShowReplace the 9 V d.c. battery with a new one. (It is recommended to replace the battery annually)
To snooze a low battery beep for 10 hours, press the Test/Hush button for 3 seconds.
And if the smoke alarm continues to beep once every 40 seconds after a new battery replacement,
- Unclip the alarm from the base.
- Remove the new battery.
- Press and hold the test button for 20 seconds.
- Replace the new battery and clip it back to the base.
Where can I find the manufacturing date of a smoke alarm?
Hide ShowWhere can I find the part number of a smoke alarm?
Hide ShowHow do you open a smoke alarm?
Hide ShowPress this button and swing the alarm on the hinge.
Range
Clipsal's Fire Tek range helps protect the most valuable assets; family, friends and the home.
They are backed by the SAI Global 5 ticks certification of quality, offering robust designs for reliability, ensuring early detection and warning from hazardous smoke and fire.
The Australian Building Code mandates all new homes must have AS3786:2014 compliant smoke alarms installed, interconnected and hard wired to mains power.
By having Fire Tek's smoke alarms installed, you will have the best chance of escaping the devastating effects of a house fire.