MASTER YOUR CASTLE with your new build or reno project
Enter competition
Image of 753R-WE INFRASCAN 360DEGREE 3WIRE

753R

Motion Infrared Sensor Sensor, 10A, 3 Wire, Flush Mount

Image of 753R-WE INFRASCAN 360DEGREE 3WIRE
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
  • 10A maximum load current
  • Stand-by power consumption is less than 1W
  • 3 Wire
  • Neutral required
  • 30 seconds warmup time
  • 360°, circular detection field 14m diameter rated detection field at maximum sensitivity
  • 5 seconds to 20 minutes timer delay range
  • Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
  • Length of sensor 141.5mm
  • 72mm Diameter
Range
Infrascan
Product brand
Clipsal
Product or component type
movement sensor
Device application
lighting
Sensor type
PIR
Product specific application
staircase monitoring
[Ue] rated operational voltage
200...265 V AC
Network frequency
50 Hz
Inrush current
10 A
Power range
<= 230 W
Protection type
creep zone protection
Function available
automatic with manual override
Movement detection area
14 m
Horizontal detection angle
0-360 °
Time delay range
0...5 s (switch-on)
Duty cycle
20 min
Detection face
  • lateral: 7 m
  • frontal: 7 m
    • Material
      plastic
      Surface finish
      brilliant
      Device mounting
      flush
      Mounting support
      ceiling
      Mounting height
      2.4 m
      IP degree of protection
      IP20
      Ambient air temperature for operation
      0-50 °C
      Environmental health and issues
      halogen free
      REACh Regulation
      Free of Substances of Very High Concern above the threshold
      EU RoHS Directive
      Compliant
      Toxic heavy metal free
      Yes
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
       Pro-active China RoHS declaration (out of China RoHS legal scope)
      Circularity Profile
      ENVEOLI121002EN

      Frequently Asked Questions

      hide show

      Which motion sensors have ESS approval?

      750WPR is ESS approved.

      Can a 753 sensor be used with fluro's and electronic ballasts

       No use the 753R

      Will the 753R sensor compatible with LED's?

      Yes the 753R sensor is compatible with the following loads:

      1. Incandescent
      2. Halogen
      3. Fluorescent
      4. Iron Core Transformers
      5. Electronic Transformers
      6. Small Motor Loads

      Is a mask available for part number 753R?

      The Part number for the mask is 753MASK-WE.

      Is cover available for part number 753R?

      No.Cover is not available for this part.

      Do you do a 753R 360 degree sensor that has a timer of 1 hour?

      No, unfortunatley this part is no longer available and we have no direct alternative.

      For further information please visit https://www.clipsal.com/Trade/search-results/sensor.

      Can the sensor 753R be overridden?

      Yes its not so much wheteher the sensor can do it its more the way its wired you will need an extra switch wire and a 3 position switch "SENSOR, OFF, ON" the part number for that switch mech is 39MSON.

      Will the timer on a 753R reset when someone is in the room?

      No. The 753R will continue to keep lights on in a room, aslong as there is movement which the sensor can detect.
      Once the room is empty the timer will then engage and eventually turn off, depending on your timer configuration.

      Can I adjust the 753R to operate day and night?

      Yes, if you turn the light level adjustment down to the " - " it will work both day and night.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=753R

      Does 753R have sensitivity adjustment ?

      Unfortunately not, 753R does not have a sensitivity adjustment. Alternatively we have 753CF1 which has sensitivity adjustment.

      Sensitivity adjustment controls the detection range and sensitivity of 753CF1 sensor. If set to the maximum position, the detection range is Ø7 m @ 2.5 m height.
      If set to the minimum position, the detection range is Ø2 m @ 2.5 m height.
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=753CF1

      What is the minimum load on a 753 sensor?

      The Standard 753 2 wire sensor has a 40W minimum load.
      The 753R 3 wire sensor has no minimum load.

      Can the sensor 753R be overridden?

      Yes its not so much wheteher the sensor can do it its more the way its wired you will need an extra switch wire and a 3 position switch "SENSOR, OFF, ON" the part number for that switch mech is 39MSON.

      Can multiple 753R 360 degree sensors be used on the same circuit?

      Yes they can providing they are the 3 wire design.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=753R

      What is the cut out size for the Clipsal , 360° Infrascan® Passive Infared Motion Sensor?

      The cut out size is 50mm, please see the attached installation sheet for further detail.

       

      What is the cut out dimensions for 753R?

      The cut out dimensions for the 753R is - 50mm

      For further information , please visit link below:-
      https://www.clipsal.com/Trade/search-results?q=753R

      User-added image

      What is the cutout dimensions for a 753?

      Cutout dimensions for 753 and 753r is 50mm.

      Please follow link below for installation instructions
      https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001475.pdf

      What is the IP rating of 753 and 753R, 360 degree flush mount PIR motion sensor?

      753 and 753R does not have an IP rating. They are designed for indoor use. 753 is a 2-wire (does not require Neutral connection), and can only switch a
      limited range of load types. 753R is a 3-wire device (requires Neutral connection to operate) capable of switching a wide range of load types.
      For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001475.pdf

      User-added image

       

      What is the part number for the 360 degree flush mount infrascan?

      The part number for the 360 degree flush mount infrascan are
      753 .... its a 2 wire device
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=753

      753R ... its a 3 wire device
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=753R

      User-added image
       

      Can the 100CF360 be fitted with an override?

      Unfortunately no, the 100CF360 is not able to be overridden by a wall switch.

      However the 753 & 753R is able to be overridden.

      For information on the 753 & 753R, please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=753R
      User-added image

      Why the LED light for a combination of a 753 with LED light strobes, when the sensor switches off? Is there a solution to fix this problem?

      Yes there is a solution. Try the following:

      Option1: You will need to change your 753 to a 753R
      Option 2: use a 31CAP, 31LCDA, or add a relay.

      This is a compatibility issue between our sensor and some other company's LED lighting.
      This solution will work 95% of the time but not always.
      For best results you need to use Clipsal LED lights.

      For more information on our sensors visit the website at www.clipsal.com/Trade/search-results and click on the link to view a brochure.

      What is the IP Rating for the motion sensor 753R?

      The IP Rating for the sensor 753R is IP20.
      Some of its key features are:
      • 10A maximum load current
      • Stand-by power consumption is less than 1W
      • 3 Wire
      • Neutral required
      • 30 seconds warmup time
      • 360°, circular detection field 14m diameter rated detection field at maximum sensitivity
      • 5 seconds to 20 minutes timer delay range
      • Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
      • Length of sensor 141.5mm
      • 72mm Diameter
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=753R
       

       

      What type of loads are compatible with 753 & 753R PIR motion sensor?

      Please refer to the below chart for load compatibility of a 753 and 753R motion sensor.

      For further information please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001475.pdf
      User-added image
       

      What adjustment options are available on 753 and 753R, 360 degree indoor passive infrared motion sensor?

      753 and 753R has the below adjustments:
      Time-On Adjustment:
      Adjustment Range: Five seconds to 20 minutes. Rotate clockwise to set required time-out period.

      Light-Level Adjustment:
      Adjustment Range: One lux to full sunlight. Rotate clockwise to avoid having load activated when natural light is adequate.

      For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001475.pdf