Quantcast

Clipsal Infrascan Outdoor Infrascan, PIR motion sensor 3 wire, IP66

Back to Infrascan - Passive Infrared Motion Sensors Home Motion and Occupancy Sensors Infrascan - Passive Infrared Motion Sensors

Black | Clipsal Infrascan Outdoor Infrascan, PIR motion sensor 3 wire, IP66

Clipsal Infrascan Outdoor Infrascan, PIR motion sensor 3 wire, IP66

Item Number: 750WPR5-BK

The Clipsal Outdoor Infrascan is the industry benchmark for IP66 outdoor motion sensors. Provided with a robust IP66 rated housing and UV protection, the Infrascan is designed for ongoing performance in harsh conditions. The Infrascan detects movement up to 18m at 110degrees with adjustable sensitivity, lux level and time delay, for control of LED or other lighting loads. Suitable for residential or commercial applications.

Where To Buy

Datasheet

Download

Barcode

Qty UoM EAN Colour
-
-
-
See all

Specifications

Design

Range of product

Infrascan

Range

Infrascan

Product brand

Clipsal

Product or component type

movement sensor

Sustainable offer status

Green Premium product

Physical

Sensor type

PIR

[Ue] rated operational voltage

200...265 V AC

[In] rated current

10 A

Movement detection area

18 m

Device mounting

surface

Mounting support

  • wall
  • ceiling

Mounting height

2.4 m

IP degree of protection

IP66

Ambient air temperature for operation

0...50 °C

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Compliant

Mercury free

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

RoHS exemption information

Yes

Environmental Disclosure

ENVPEP2201005_V1

Circularity Profile

ENVEOLI2201005_V1

Others

Package 1 Bare Product Quantity

1

Network frequency

50 Hz

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

16.2 cm

Package 1 Width

8.0 cm

Package 1 Length

12.0 cm

Package 1 Weight

316.0 g

Unit Type of Package 2

S03

Number of Units in Package 2

5

Package 2 Height

30.0 cm

Package 2 Width

30.0 cm

Package 2 Length

40.0 cm

Package 2 Weight

1.7 kg

Unit Type of Package 3

P12

Number of Units in Package 3

540

Package 3 Height

150.0 cm

Package 3 Width

80.0 cm

Package 3 Length

120.0 cm

Package 3 Weight

198.0 kg
Show all specifications

Frequently Asked Questions

hide show

Why is the lens on my 750WPR5 bowed when I got it out of the box?

The unit is IP66 rated, which means it is totally sealed. If the Infrascan has been freighted via air, the cabin pressure and the sealed unit can force the lens to bow. Once the unit is exposed to the sun/warmth the lens will return back to its normal state.

Is the 750WPR5 suitable for outdoor use?

Yes.

The product has an IP rating of IP66. An IP66 rating means that the unit doesn’t allow dust or strong jets of water to enter the inside of the unit.
The product can be installed on the outside of the home in the elements with no protection as long as it is installed correctly using the gasket supplied and following the instructions.
 

Can the new 750WPR5 be used to easily replace an older version of the 750WPR?

Yes, the mounting base is the same dimensions and use the same 84mm mounting holes, meaning it is full retrofittable with the previously model
 

How do I trigger the override function on the 750WPR5?

Ensure the sensor is in Automatic Operation mode. Turn the wall switch controlling the sensor OFF, ON, OFF and ON within 2 seconds. Sensor is now in an 8-hour override mode. After this period times out, the sensor will return to automatic operation mode. To cancel manual override mode prior to 8 hours expiring, turn the wall switch OFF and then ON within 2 seconds.

Note - The override function has the load stay on for 8 hours. This can NOT be configured to change the 8 hours to be longer or shorter. You can only shorten this override with physical switch presses.

What happens to the 750WPR5 when first powered up?

On start up, wait at least 30 seconds for the unit to stabilise. When first switched on, the 750WPR5 will switch the load on for the period of time the 'Timer' trimpot/dial is set to.

Does the new 750WPR5 use the same relay that was used in the previous 750WPR?

The original relay has been used for some years now. We continue to use the same series of relay but the latest version design, which incorporates the same qualities but with the added LED rating required for todays modern load types.